Spherical instrumented indentation of porous nanocrystalline zirconia

Journal of the European Ceramic Society

Volumn 32, Issue 1, 2012, Pages 123-132

  Chintapalli, R K ^a   Jimenez Pique, E ^a   Marro, F G ^a   Yan, H ^b,c   Reece, M ^b,c   Anglada, M ^a  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^b QUEEN MARY UNIVERSITY OF LONDON   (United Kingdom)

^c Nanoforce Technology Limited   (United Kingdom)

Author keywords

Grain size; Mechanical properties; Porosity; Sintering; Zirconia

Indexed keywords

AVERAGE GRAIN SIZE; BERKOVICH INDENTATION; DENSE MATERIALS; ELASTO-PLASTIC; GRAIN SIZE; INSTRUMENTED INDENTATION; MICROSTRUCTURAL CHARACTERISATION; MONOCLINIC PHASE; NANOCRYSTALLINE ZIRCONIA; NANOINDENTATION TESTS; NANOMETRICS; NO PHASE; SPHERICAL INDENTATIONS; STRESS-STRAIN RESPONSE; TETRAGONAL ZIRCONIA POLYCRYSTAL;

CURVE FITTING; GRAIN SIZE AND SHAPE; INDENTATION; NANOCRYSTALLINE POWDERS; PHASE TRANSITIONS; POROSITY; POROUS MATERIALS; RAMAN SPECTROSCOPY; SPARK PLASMA SINTERING; SPECTROSCOPIC ANALYSIS; SPHERES; STRAIN; STRESS-STRAIN CURVES; STRESSES; ZIRCONIA;

NANOINDENTATION;

EID: 80054788764     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2011.07.037     Document Type: Article

References (46)

1. Maca K., Dobsak P., Boccaccini A.R. Fabrication of graded porous ceramics using alumina-carbon powder mixtures. Ceram Int 2001, 27:577-584.
2. Biasini V., Parasporo M., Bellosi A. Fabrication and characterisation of Al2O3 porous bodies by hot isostatic pressing. Thin Solid Film 1997, 297:207-211.
3. Gain A.K., Song H.Y., Lee B.T. Microstructure and mechanical properties of porous yttria stabilized zirconia ceramic using poly methyl methacrylate powder. Scripta Mater 2006, 54:2081-2085.
4. Miao X., Hu Y., Liu J., Huang X. Hydroxyapatite coating on porous zirconia. Mater Sci Eng C 2007, 27:257-261.
5. Kim H.W., Lee S.Y., Bae C.J., Noh Y.J., Kim H.E., Kim H.M., et al. Porous ZrO2 bone scaffold coated with hydroxyapatite with fluorapatite intermediate layer. Biomaterials 2003, 24:3277-3284.
6. Lawn B.R., Wilshaw T.R. Indentation fracture: principles and applications. Mater Sci 1975, 10(6):1049-1081.
7. Lawn B.R. Fracture of brittle solids 1993, Cambridge University Press, Cambridge, UK.
8. Latella B.A., OConnor B.H., Padture N.P., Lawn B.R. Hertzian contact damage in porous alumina ceramics. J Am Ceram Soc 1997, 80(4):1027-1031.
9. Suganuma M. Spherical and vickers indentation damage in yttria-stabilized tetragonal zirconia polycrystals. J Am Ceram Soc 1999, 82:3113-3120.
10. Kun L.S., Tandon R., Readey M.J., Lawn B.R. Scratch damage in zirconia ceramics. J Am Ceram Soc 2000, 83:1428-1432.
11. Pajares A., Guiberteau F., Lawn B.R., Lathabai S. Hertzain contact damage in magnesia - partially stabilised zirconia. J Am Ceram Soc 1995, 78(4):1083-1086.
12. Latella B.A., Liua T., Atanacio A.J. Effect of grain size on Hertzian contact damage in 9mol% Ce-TZP ceramics. J Eur Ceram Soc 2002, 22:1971-1979.
13. Lawn B.R. Indentation of ceramics with spheres: a century after hertz. J Am Ceram Soc 1998, 81(8):1977-1994.
14. Gaillard Y., Jiménez-Piqué E., Soldera F., Mücklich F., Anglada M. Quantification of hydrothermal degradation in zirconia by nanoindentation. Acta Mater 2008, 56:4206-4216.
15. Muñoz-Tabares J.A., Jiménez-Piqué E., Anglada M. Subsurface evaluation of hydrothermal degradation of zirconia. Acta Mater 2011, 59:473-548.
16. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 1992, 7:1564-1583.
17. Gaillard Y., Jimenez-Pique E., Anglada M. Scale dependence of the Young's modulus measured by nanoindentation in columnar YSZ EB-PVD thermal barriers coatings. Philos Magaz 2006, 86:5441-5451.
18. Montagne A., Tromas C., Audurier V., Woirgard J. A new insight on reversible deformation and incipient plasticity during nanoindentation test in MgO. J Mater Res 2009, 24:883-889.
19. Field J.S., Swain M.V. A simple predictive model for spherical indentation. J Mater Res 1993, 8(2):297-305.
20. Herbert E.G., Pharr G.M., Oliver W.C., Lucas B.N., Hay J.L. On the measurement of stress-strain curves by spherical indentation. Thin Solid Films 2001, 398-399:331-335.
21. Basu S., Mosenson A., Barsoum M.W. On the determination of spherical nanoindentation stress-strain curves. J Mater Res 2006, 21(10):2628-2637.
22. He L.H., Swain M. Nanoindentaion derived stress-strain properties of dental materials. Dent Mater 2007, 23:814-821.
23. Pathak S., Kalidindi S.R., Klemenz C., Orlovskaya N. Analyzing indentation stress-strain response of LaGaO3 single crystals using spherical indenters. J Eur Ceram Soc 2008, 28:2213-2220.
24. Kucheyev S.O., Hamza A.V., Satcher J.H., Worsely M.A. Depth-sensing indentation of low density brittle nanoporous solids. Acta Mater 2009, 57:3472-3480.
25. Tabor D. Hardness of metals 1951, Clarendon Press, Oxford.
26. Oliver W.C., Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 2004, 19:3-20.
27. Sneddon I.N. The relaxation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. Int J Eng Sci 1965, 3:47.
28. Johanson K.L. Contact mechanics 1985, Cambridge University Press, Cambridge.
29. ASTM C 20-00. Standard test methods for apparent porosity, water absorption, apparent specific gravity, and bulk density of burned refractory brick and shapes by boiling water.
30. Liang Y.-H., Arai Y., Ozasa K., Ohashi M., Tsuchida E. Simultaneous measurement of nanoprobe indentation force and photoluminescence of InGaAs/GaAs quantum dots and its simulation. Physica E 2007, 36:1-11.
31. Linss V., Schwarzer N., Chudoba T., Karniychuk M., Richter F. Mechanical properties of a graded B-C-N sputtered coating with varying Young's modulus: deposition, theoretical modelling and nanoindentation. Surf Coat Technol 2005, 195:287-297.
32. Fischer-Cripps A.C. Critical review of analysis and interpretation of nanoindentation test data. Surf Coat Technol 2006, 200:4153-4165.
33. Moseson A.J., Basu S., Barsoum M.W. Determination of the effective zero point of contact for spherical nanoindentation. J Mater Res 2008, 23:204-209.
34. Dorn M.T., Nickel K.G. Zirconia ceramics: phase transitions and raman microspectroscopy. High-pressure surface science and engineering 2004, 467-520. IOP Publishing Ltd, London. Y. Gogotsi, V. Domnich (Eds.).
35. Katagiri G., Ishida H., Ishitani A., Masaki T. Direct determination by Raman microprobe of the transformation zone size in Y2O3 containing tetragonal ZrO2 polycrystals. Science and technology of zirconia III 1988, 537-544. American Ceramic Society, Westerville, OH. S. Somiya, N. Yamamoto, H. Yanagida (Eds.).
36. He L.H., Fujisawa N., Swain M. Elastic modulus and stress-strain response of human enamel by nano-indentation. Biomaterials 2006, 27(24):4388-4398.
37. Rice R.W. Porosity of ceramics 1998, Marcel Dekker, New York.
38. Luo J., Steven R. Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics. Ceram Int 1999, 25:281-286.
39. Gaillard Y., Anglada M., Jimenez-Pique E. Nanoindentaion of yttria doped zirconia: effect of crystallographic structure on deformation mechanisms. J Mater Res 2009, 24(3):719-727.
40. Ruhle M., Heuer A.H. Phase Transformations in ZrO - containing ceramics II, the martensitic reaction in t-ZrO. Science and technology of Zirconia II 1984, vol. 12:14-32. The American Ceramic Society, Columbus. N. Claussen, M. Ruhle, A.H. Heuer (Eds.).
41. Suresh A., Mayo M.J., Porter W.D., Rawn C.J. Crystallite and grain-size-dependent phase transformations in yttria-doped zirconia. J Am Ceram Soc 2003, 86(2):360-362.
42. Chintapalli R., Mestra A., García Marro F., Yan H., Reece M., Anglada M. Stability of nanocrystalline spark plasma sintered 3Y-TZP. Materials 2010, 3(2):800-814.
43. Chen W. Model of transformation toughening in brittle material. J Am Ceram Soc 1991, 74:2564-2572.
44. Heuer A.H., Claussen N., Keriven W.M., Ruhle M. Stability of tetragonal ZrO2 particles in ceramic matrices. J Am Ceram Soc 1982, 65(12):642-650.
45. Schmauder S., Mader W., Ruhle M. Calculations of strain distributions in and around ZrO2 inclusions. Science and technology of zirconia II 1984, vol. 12:251-256. The American Ceramic Society, Columbus. N. Claussen, M. Ruhle, A.H. Heuer (Eds.).
46. Chen I.W., Chiao Y.H. Martensitic transformations in ZrO2 and HfO2. An assessment of small particle experiments with metal and ceramic matrices. Science and technology of zirconia II 1984, vol. 12:33-46. The American Ceramic Society, Columbus. N. Claussen, M. Ruhle, A.H. Heuer (Eds.).