Experimental assessment for instantaneous temperature and heat flux measurements under Diesel motored engine conditions

Energy Conversion and Management

Volumn 54, Issue 1, 2012, Pages 57-66

  Torregrosa, A J ^a   Bermudez V ^a   Olmeda, P ^a   Fygueroa, O ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Diesel engine; Fast response thermocouples; Local wall temperature; Transient heat flux

Indexed keywords

ENGINE CONDITIONS; ENGINE PARAMETER; EXPERIMENTAL ASSESSMENT; EXPERIMENTAL BENCH; EXPERIMENTAL FACILITIES; FAST RESPONSE; HEAT FLUX MEASUREMENT; LOCAL HEAT FLUX; MEASURED DATA; STEADY-STATE CONDITION; TEMPERATURE SIGNAL; THERMODYNAMIC DIAGNOSIS; TRANSIENT HEAT; WALL TEMPERATURES;

COMBUSTION; COMBUSTION CHAMBERS; DIESEL ENGINES; ENGINES; FOURIER ANALYSIS; HEAT TRANSFER; TEMPERATURE; TEMPERATURE MEASUREMENT; THERMOCOUPLES;

HEAT FLUX;

EID: 80755148741     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2011.10.009     Document Type: Article

References (46)

1. W.J.D. Annand, and T.H. Ma Instantaneous heat transfer rates to the cylinder head surface of a small compression-ignition engine Proc Inst Mech Eng 185 1970-1971 976 987
2. Mure CR, Rhee KT. Instantaneous heat transfer over the piston of a motored direct injection-type Diesel engine, SAE paper 890469; 1989.
3. Woschni G. A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE paper 670931. Warrendale (PA): Society of Automotive Engineers Inc.; 1967
4. G. Borman, and K. Nishiwaki Internal combustion engine heat transfer Prog Energy Combust Sci 13 1987 1 46 (Pubitemid 17585919)
5. J.B. Heywood Internal combustion engine fundamentals International ed. 1988 MacGraw-Hill Singapore p. 668-711
6. E.G. Giakoumis Cylinder wall insulation effects on the first- and second-law balances of a turbocharged Diesel engine operating under transient load conditions Energy Convers Manage 48 2007 2925 2933 (Pubitemid 47500181)
7. Morel T, Wahiduzzaman S, Fort EF, Tree DR, DeWitt DP, Kreider KG. Heat transfer in a cooled and an insulated Diesel engine. SAE paper 890572. Warrandale (PA): Society of Automotive Engineers Inc.; 1989
8. H. Hazar Characterization and effect of using cotton methyl ester as fuel in a LHR Diesel engine Energy Convers Manage 52 2011 258 263
9. E. Buyukkaya, T. Engin, and M. Cerit Effects of thermal barrier coating on gas emissions and performance of a LHR engine with different injection timings and valve adjustments Energy Convers Manag 47 2006 1298 1310 (Pubitemid 43220117)
10. A. Parlak The effect of heat transfer on performance of the Diesel cycle and exergy of the exhaust gas stream in a LHR Diesel engine at the optimum injection timing Energy Convers Manage 46 2005 167 179
11. C.D. Rakopoulos, E.G. Giakoumis, and D.C. Rakopoulos Cylinder wall temperature effects on the transient performance of a turbocharged Diesel engine Energy Convers Manage 45 2004 2627 2638
12. A. Broatch, J.M. Lujan, J.R. Serrano, and B. Pla A procedure to reduce pollutant gases from Diesel combustion during European MVEG-A cycle by using electrical intake air-heaters Fuel 87-12 2008 2760 2778
13. A.J. Torregrosa, P. Olmeda, J. Martín, and B. Degraeuwe Experiments on the influence of inlet charge and coolant temperature on performance and emissions of a DI Diesel engine Exp Therm Fluid Sci 30-7 2006 633 641 (Pubitemid 44062278)
14. Allen DL, Lasecki MP. Thermal management evolution and controlled coolant flow. SAE paper 2001-01-1732; 2001.
15. A.J. Torregrosa, A. Broatch, P. Olmeda, and C. Romero Assessment of the influence of different cooling system configurations on engine warm-up, emissions and fuel consumption Int J Automot Technol 9-4 2008 447 458
16. T. Thurnheera, D. Edenhausera, P. Soltica, D. Schreibera, P. Kirchenb, and A. Sankowskic Experimental investigation on different injection strategies in a heavy-duty Diesel engine: emissions and loss analysis Energy Convers Manage 52 2011 457 467
17. C.D. Rakopoulos, D.C. Rakopoulos, E.G. Giakoumis, and D.C. Kyritsis Validation and sensitivity analysis of a two zone Diesel engine model for combustion and emissions prediction Energy Convers Manage 45 2004 1471 1495
18. F. Payri, S. Molina, J. Martn, and O. Armas Influence of measurement errors and estimated parameters on combustion diagnosis Appl Therm Eng 26 2006 226 236
19. Rakopoulos CD, Hountalas DT. Development and validation of a 3-D multi-zone combustion model for the prediction of DI Diesel engine performance and pollutants emissions. SAE paper 981021; 1998.
20. A.J. Torregrosa, P. Olmeda, J. Martín, and C. Romero A tool for predicting the thermal performance of a Diesel engine Heat Transfer Eng 32 2011 891904
21. C.A. Finol, and K. Robinson Thermal modelling of modern engines: a review of empirical correlations to estimate the in-cylinder heat transfer coefficient IMechE 220-D 2006 1765 1781 (Pubitemid 46481621)
22. Taylor CF, Toong TY. Heat transfer in internal-combustion engines. ASME paper 57-HT-17-1957; 1957.
23. W.J. Annand Heat transfer in the cylinders of reciprocating internal combustion engines Proc Inst Mech Eng 177-36 1963 973 990
24. Hohenberg G. Advanced approaches for heat transfer calculations. SAE trans. 88. SAE paper 790825; 1979.
25. Dent JC, Suliaman SJ. Convective and radiative heat transfer in a high swirl direct injection Diesel engine. SAE trans. 86. SAE paper 770407; 1977.
26. LeFeuvre T, Myers PS, Uyehara OA. Experimental instantaneous heat fluxes in a Diesel engine and their correlation. SAE trans. 78. SAE paper 690464; 1969.
27. C.D. Rakopoulos, E.G. Giakoumis, and D.C. Rakopoulos Study of the short-term cylinder wall temperature oscillations during transient operation of turbo-charged Diesel engine with various insulation schemes Int J Engine Res 9 2008 177 193
28. Payri F, Margot X, Gil A, Martín J. Computational study of heat transfer to the walls of a Diesel engine. SAE-2005-01-0210; 2005.
29. H.W. Wu, and S.W. Perng Numerical analysis of thermal turbulent flow in the bowl-in-piston combustion chamber of a motored engine Int J Therm Sci 43 2004 1011 1023
30. C.D. Rakopoulos, G.M. Kosmadakis, and E.G. Pariotis Investigation of piston bowl geometry and speed effects in a motored HSDI Diesel engine using a CFD against a quasi-dimensional model Energy Convers Manage 51 2010 470 484
31. C.D. Rakopoulos, G.M. Kosmadakis, and E.G. Pariotis Critical evaluation of current heat transfer models used in CFD in-cylinder engine simulations and establishments of comprehensive wall-function formulation Appl Energy 87 2010 1612 1630
32. B. Jayashankaraa, and V. Ganesan Effect of fuel injection timing and intake pressure on the performance of a DI Diesel engine - a parametric study using CFD Energy Convers Manage 51 2010 1835 1848
33. E. Piccini, S.M. Guo, and T.V. Jones The development of a new direct-heat-flux gauge for heat-transfer facilities Meas Sci Technol 11 2000 342 349 (Pubitemid 30255156)
34. D.R. Buttsworth, R. Stevens, and C.R. Stone Eroding ribbon thermocouples: impulse response and transient heat flux analysis Meas Sci Technol 16 2005 1487 1494 (Pubitemid 40912112)
35. Ninigian J, Ninigian D. A unique thermocouple to measure the temperature of squibs, igniters, propellants and rocket nozzles. SPIE paper 6222-3; 2007.
36. X. Wang, P. Price, C.R. Stone, and D. Richardson Heat release and flux in a spray-guided direct-injection gasoline engine IMechE 221-D 2007 1441 1452
37. Chang J, Gralp O, Filipi Z, Assanis D, Kuo TW, Najt P, et al. New heat transfer correlations for an HCCI engine derived from measurements of instantaneous surface heat flux. SAE paper 2004-01-2996; 2004.
38. J.M. Desantes, A.J. Torregrosa, A. Broatch, and P. Olmeda Experiments on the influence of intake conditions on local instantaneous heat flux in reciprocating internal combustion engines Energy 36 2011 60 69
39. J. Chang, Z. Filipi, D.N. Assanis, P. Najt, and R. Rask Characterizing the thermal sensitivity of gasoline homogeneous charge compression ignition engine with measurement of instantaneous wall temperature and heat flux Int J Engine Res 6-4 2005 289 309 (Pubitemid 41545131)
40. C.D. Rakopoulos, and G.C. Mavropoulos Experimental evaluation of local instantaneous heat transfer characteristics in the combustion chamber of air-cooled direct injection Diesel engine Energy 33 2008 1084 1099
41. F. Payri, P. Olmeda, J. Martín, and A. García A complete 0D thermodynamic predictive model for direct injection Diesel engines Appl Energy 88 2011 4632 4641
42. F. Payri, P. Olmeda, C. Guardiola, and J. Martín Adaptive determination of cut-off frequencies for filtering the in-cylinder pressure in Diesel engines combustion analysis Appl Therm Eng 31 2011 2869 2876
43. M. Lapuerta, O. Armas, and S. Molina Study of the compression cycle of a reciprocating engine through the polytropic coefficient Appl Therm Eng 23 2003 313 323 (Pubitemid 35460095)
44. D.T. Hountalas, G.C. Mavropoulos, and G. Kourbetis Experimental investigation to develop a methodology for estimating the compression condition of DI Diesel engines Energy Convers Manage 47 2006 1 18
45. V.D. Overbye, J.E. Bennethum, O.A. Uyehara, and P.S. Myers Unsteady heat transfer in engines Trans SAE 69 1961 461 492
46. Morel T, Wahiduzzaman S, Tree DR, DeWitt DP. Effect of speed, load, and location on heat transfer in a Diesel engine - measurements and predictions. SAE paper 870154; 1987. p. 125-36. (Pubitemid 17560779)