A survey on diagnostics methods for automotive engines

Proceedings of the American Control Conference

Volumn , Issue , 2011, Pages 985-990

  Mohammadpour, Javad ^a   Franchek, Matthew ^b   Grigoriadis, Karolos ^b  

^a UNIVERSITY OF HOUSTON   (United States)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

FAULT DETECTION; LAWS AND LEGISLATION; SURVEYS;

ACTUATOR FAULT; AUTOMOTIVE ENGINE; COMPONENT FAULTS; FAULT DETECTION AND DIAGNOSIS; FAULT DETECTION AND ISOLATION; MODEL-BASED METHOD; ONBOARD DIAGNOSIS; STATE REGULATIONS;

AUTOMOBILE ENGINES;

EID: 80053159358     PISSN: 07431619     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/acc.2011.5990643     Document Type: Conference Paper

References (82)

1. Rizzoni, G., S. Onori, and M. Rubagotti. Diagnosis and Prognosis of Automotive Systems: Motivations, History and Some Results. in 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS). 2009. Barcelona, Spain.
2. Rizzoni, G., A. Soliman, and K. Passino, A Survey of Automotive Diagnostic Equipment and Procedures, in SAE International Congress & Exposition. 1993: Detroit, MI.
3. Jones, N.B. and Y.H. Li, A review of condition monitoring and fault diagnosis for diesel engines. Tribotest, 2000. 6(3): p. 267-291. (Pubitemid 32849846)
4. He, Y. and L. Feng. Diesel fuel injection system faults diagnosis based on fuzzy injection pressure pattern recognition. 2004.
5. Sharkey, A.J.C., G.O. Chandroth, and N.E. Sharkey, A multi-net system for the fault diagnosis of a diesel engine. Neural Computing &Applications, 2000. 9(2): p. 152-160.
6. Chandroth, G.O., A.J.C. Sharkey, and N.E. Sharkey, Artificial neural nets and cylinder pressures in diesel engine fault diagnosis. Proc of INMARCO Shipping Trends for the Next Millennium, 1998. 1: p. 9.1-9.2.
7. Lee, B., Y. Guezennec, and G. Rizzoni, Model-based fault diagnosis of spark-ignition direct-injection engine using nonlinear estimations, in SAE World Congress & Exhibition. 2005: Detroit, MI.
8. Schilling, A., Model-based detection and isolation of faults in the air and fuel paths of common-rail DI deisel engines equiped with a lambda and a nitrogen oxides sensor. 2008, ETH Zurich: Zurich, Switzerland.
9. Schilling, A., A. Amstutz, and L. Guzzella, Model based detection and isolation of faults due to ageing in the air and fuel paths of common rail direct injection diesel engines equipped with a and a nitrogen oxides sensor. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2008. 222(1): p. 101-117. (Pubitemid 351434315)
10. Payri, F., et al., Injection diagnosis through common-rail pressure measurement. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2006. 220(3): p. 347-357. (Pubitemid 46485339)
11. Chandroth, G.O., A.J.C. Sharkey, and N.E. Sharkey, Cylinder pressures and vibration in internal combustion engine condition monitoring. Proceedings of Comadem 99, Sunderland, UK, 1999.
12. Shimasaki, Y., et al., Spark plug voltage analysis for monitoring combustion in an internal combustion engine, in SAE International Congress & Exposition. 1993: Detroit, MI.
13. Plapp, G. and M. Klenk, Methods of on-board misfire detection, in SAE International Congress & Exposition. 1990: Detroit, MI.
14. Azzoni, P.M., et al., Misfire Detection in a High-Performance Engine by the Principal Component Analysis Approach, in SAE International Congress & Exposition. 1996: Detroit, MI.
15. Geveci, M., A.W. Osburn, and M.A. Franchek, An investigation of crankshaft oscillations for cylinder health diagnostics. Mechanical Systems and Signal Processing, 2005. 19(5): p. 1107-1134. (Pubitemid 40612489)
16. Tinaut, F.V., et al., Faults Detection in a Reciprocating Internal Combustion Engine From Instantaneous Engine Speed, in CIMAC International Congress on Combustion Engines. 1998: Copenhagen, Denmark.
17. Osburn, A.W., T.M. Kostek, and M.A. Franchek, Residual generation and statistical pattern recognition for engine misfire diagnostics. Mechanical Systems and Signal Processing, 2006. 20(8): p. 2232-2258. (Pubitemid 44205416)
18. Gani, E. and C. Manzie, Misfire-misfuel classification using support vector machines. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2007. 221(9): p. 1183-1195.
19. Rizzoni, G., Estimate of indicated torque from crankshaft speed fluctuations: A model for the dynamics of the IC engine. IEEE transactions on vehicular technology, 1989. 38(3): p. 168-179. (Pubitemid 20654559)
20. Connolly, F.T. and G. Rizzoni, Real time estimation of engine torque for the detection of engine misfires. Journal of Dynamic Systems, Measurement, and Control, 1994. 116: p. 675.
21. Rizzoni, G., S. Drakunov, and Y.Y. Wang, On-line estimation of indicated torque in IC engines via sliding mode observers, in American Control Conference. 1995: Seattle, WA. p. 2123-2127.
22. Kao, M. and J.J. Moskwa, Model-based engine fault detection using cylinder pressure estimates from nonlinear observers, in IEEE Conference on Decision and Control. 1994: Lake Buena Vista, FL.
23. Wang, Y. and F. Chu, Real-time misfire detection via sliding mode observer. Mechanical Systems and Signal Processing, 2005. 19(4): p. 900-912. (Pubitemid 40556441)
24. Kiencke, U., Engine misfire detection. Control engineering practice, 1999. 7(2): p. 203-208. (Pubitemid 29368661)
25. Liu, S., F. Gu, and A. Ball, The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2002. 216(5): p. 391-402.
26. Gyan, P., et al., Crankangle-Based Torque Estimation: Mechanistic/Stochastic, in SAE World Congress. 2000: Detroit, MI.
27. Tinaut, F.V., et al., Misfire and compression fault detection through the energy model. Mechanical Systems and Signal Processing, 2007. 21(3): p. 1521-1535. (Pubitemid 44920358)
28. Corti, E., Modelling and Diagnostic Constraints of Missing Combustion Phenomena. 2004.
29. Lambert, C., et al., Intelligent classification of engine misfire and classification of engine misfire and misfuel using support vector machines, in Intelligent vehicles and road infrastructure. 2005: Melbourne, Australia.
30. Chang, J., M. Kim, and K. Min, Detection of misfire and knock in spark ignition engines by wavelet transform of engine block vibration signals. Measurement Science and Technology, 2002. 13: p. 1108.
31. Aihua, J., Xiaoyu, L., Xiuchang, H., Zhenhua, Z., HongXing, H., Detection of engine misfire by wavelet analysis of cylinder-head vibration signals. International Journal of Agricultural and Biological Engineering, 2008. 1(2): p. 1-7.
32. Montani, M. and N. Speciale, Multiple Misfire Identification by a Wavelet-Based Analysis of Crankshaft Speed Fluctuation, in IEEE International Symposium on Signal Processing and Information Technology. 2006: Vancouver, BC. p. 144-148.
33. Samimy, B. and G. Rizzoni, Mechanical signature analysis using time-frequency signalprocessing: application to internal combustion engine knock detection. Proceedings of the IEEE, 1996. 84(9): p. 1330-1343. (Pubitemid 126752591)
34. J.M. Borg, et al., Wavelet-based knock detection with fuzzy logic, in IEEE International Conference on Computational Intelligence for Measurement Systems and Applications. 2005: Giardini Naxos, Italy. p. 26-31.
35. Z. Zhang and E. Tomita, Knocking detection using wavelet instantaneous correlation method. JapanSocietyof AutomotiveEngineers (JSAE) review, 2002(23): p. 443-449.
36. Jonghwa Lee, et al., A new knock-detection method using cylinder pressure, block vibration and sound pressure signals from an SI engine, in SAE International Fuels & Lubricants Meeting &Exposition. 1998: Detroit, MI.
37. Masayoshi Kaneyasu, et al., Engine knock Dedection using multispectrum method, in SAE International Congress & Exposition. 1992: Detroit, MI.
38. Sangha, M.S., D.L. Yu, and J.B. Gomm, Robustness Assessment of Adaptive FDI System for Engine Air Path. International Journal of Information and Systems Sciences, 2007. 3(1): p. 180-205.
39. Michael Fischer, et al., OBD of Diesel EGR using Artificial Neural Networks, in SAE World Congress & Exhibition. 2009: Detroit, MI.
40. Kimmich, F., A. Schwarte, and R. Isermann, Fault detection for modern Diesel engines using signal-and process model-based methods. Control engineering practice, 2005. 13(2): p. 189-203. (Pubitemid 40032234)
41. Nyberg, M. and T. Stutte, Model based diagnosis of the air path of an automotive diesel engine. Control engineering practice, 2004. 12(5): p. 513-525. (Pubitemid 38362712)
42. Mohammadpour, J., et al., Real-Time Diagnosis of the Exhaust Recirculation in Diesel Engines Using Least-Squares Parameter Estimation. ASME Journal of Dynamic Systems, Measurement, and Control, 2010. 132(1).
43. Van Nieuwstadt, M. and A. Brahma, Uncertainty Analysis of Model Based Diesel Particulate Filter Diagnostics. SAE International Journal of Commercial Vehicles, 2008. 1(1): p. 356-362.
44. Van Nieuwstadt, M.J. and D.F. Trudell. Diagnostics for Diesel Particulate Filters. in SAE World Congress & Exhibition. 2004. Detroit, MI.
45. Konstandopoulos, A.G., et al. Fundamental studies of diesel particulate filters: transient loading, regeneration and aging. in SAE World Congress. 2000. Detroit, MI.
46. Cunningham, P., P. Meckl, and C. Shah. Correlating Dynamic Pressure Signal Features to Diesel Particulate Filter Load. in SAE World Congress & Exhibition. 2007. Detroit, MI.
47. Surve, P.R., Diesel Particulate Filter Diagnostics Using Correlation and Spectral Analysis, in ECE. 2008, Purdue.
48. Gheorghiu, V., D. Ueberschär, and G. Zikoridse. Soot sensor for diesel emission onboard control systems. in FISITA Congress. 2006. Jokohama, Japan.
49. Kabin, K.S., R.L. Muncrief, and M.P. Harold, NOX storage and reduction on a Pt/BaO/alumina monolithic storage catalyst. Catalysis Today, 2004. 96(1-2): p. 79-89.
50. Wang, X., et al., Lean Nox Trap Storage Model for Diesel Engine Aftertreatment Control and Diagnosis. Transactions of the ASABE, 2006. 49(6): p. 1687-1693. (Pubitemid 46406788)
51. Canova, M., et al., Model-based fault detection and isolation for a diesel lean NOx trap aftertreatment system. Control engineering practice, 2009.
52. Pezzini, A., et al. A methodology for fault diagnosis of diesel NOx aftertreatment systems. in SAFEPROCESS. 2009. Barcelona, Spain.
53. Pisu, P., M. Canova, and A. Soliman. Model-Based Fault Diagnosis of a NOx Aftertreatment System. 2008.
54. Siebenbrunner, P., et al. OBD of de-NOx Systems - Requirements for Software Development and Calibration for 2010 and Beyond. in SAE World Congress & Exhibition. 2008. Detroit, MI.
55. Hsieh, M.F. and J. Wang. An Extended Kalman Filter for Ammonia Coverage Ratio and Capacity Estimations in the Application of Diesel Engine SCR Control and Onboard Diagnosis. in American Control Conference. 2010. Baltimore, MD.
56. Hsieh, M.F. and J. Wang, Observer-based estimation of selective catalytic reduction catalyst ammonia storage. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2010: p. 1-13.
57. Balenovic, M., Modelling and model-based control of a three-way catalytic converter. 2002, Technische Universiteit Eindhoven.
58. Theis, J. Catalytic converter diagnosis using the catalyst exotherm. in International Fuels & Lubricants Meeting & Exposition. 1994. Baltimore, MD: SAE.
59. Brandt, E.P. and J.W. Grizzle. Three-way catalyst diagnostics for advanced emissions control systems. in American Control Conference. 2001. Arlington, VA.
60. Fiengo, G., L. Glielmo, and S. Santini, On-board diagnosis for threeway catalytic converters. International Journal of Robust and Nonlinear Control, 2001. 11(11).
61. Frank, P.M., Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy- a survey and some new results. Automatica, 1990. 26: p. 459-474.
62. Rizzoni, G. and P.S. Min, Detection of sensor failures in automotive engines. IEEE transactions on vehicular technology, 1991. 40(2): p. 487-500. (Pubitemid 21661570)
63. Vemuri, A.T. Diagnosis of sensor bias faults. 1999.
64. Namburu, S.M., et al. Application of an Effective Data-Driven Approach to Real-time time Fault Diagnosis in Automotive Engines. 2007.
65. Weinhold, N., et al., Embedded model-based fault diagnosis for onboard diagnosis of engine control systems, in IEEE Conference on Control Applications. 2005: Toronto, Canada. p. 1206-1211.
66. Gertler, J.J., et al., Model-based on-board fault detection and diagnosis for automotive engines. Control Engineering Practice, 1993: p. 3-17. (Pubitemid 23638660)
67. Soliman, A., G. Rizzoni, and Y.W. Kim, Diagnosis of an automotive emission control system using fuzzy inference. Control engineering practice, 1999. 7(2): p. 209-216.
68. Kim, Y.W., G. Rizzoni, and V. Utkin, Automotive engine diagnosis and control via nonlinear estimation. IEEE Control Systems Magazine, 1998. 18(5): p. 84-99. (Pubitemid 128564951)
69. Nyberg, M., Model-based diagnosis of an automotive engine using several types of fault models. IEEE Transactions on Control Systems Technology, 2002. 10(5): p. 679-689. (Pubitemid 35032721)
70. Franchek, M.A., P.J. Buehler, and I. Makki, Intake Air Path Diagnostics for Internal Combustion Engines. Journal of Dynamic Systems, Measurement, and Control, 2007. 129: p. 32.
71. Laukonen, E.G., et al., Fault detection and isolation for an experimental internalcombustion engine via fuzzy identification. IEEE Transactions on Control Systems Technology, 1995. 3(3): p. 347-355.
72. Olofsson, N., Evaluation of Observers for Fault Diagnosis on an Automotive Engine.
73. Vinsonneau, J.A.F., et al. Improved SI engine modelling techniques with application to fault detection. 2002.
74. Gunnarsson, M., Parameter Estimation for Fault Diagnosis of an Automotive Engine using Extended Kalman Filters. 2001, Linköping University: Linköping, Sweden.
75. Nilsson, F., Diagnosis of a truck engine using nonlinear filtering techniques, in Department of Electrical Engineering, Univ. of Linköpings. 2007: Linköping, Sweden.
76. Wang, Y.Y. and I. Haskara. Exhaust pressure estimation and its application to variable geometry turbine and wastegate diagnostics. in American Control Conference. 2010. Baltimore, MD.
77. Antory, D., Application of a data-driven monitoring technique to diagnose air leaks in an automotive diesel engine: A case study. Mechanical Systems and Signal Processing, 2007. 21(2): p. 795-808. (Pubitemid 44667407)
78. Ceccarelli, R., et al., Model-based Adaptive Observers for Intake Leakage Detection in Diesel Engins, in American Control Conference. 2009: St. Louis, MO. p. 1128-1135.
79. Ceccarelli, R., P. Moulin, and C. De Wit, Robust Strategy for Intake Leakage Detection in Diesel Engines, in IEEE Conference on Control Applications. 2009: Saint Petersbourg, Russia. p. 340-345.
80. Nyberg, M., Using hypothesis testing theory to evaluate principles for leakage diagnosis of automotive engines. Control engineering practice, 2003. 11(11): p. 1263-1272. (Pubitemid 37481819)
81. Nyberg, M. and L. Nielsen, Model-Based Diagnosis for the Air Intake System of the SI Engine. SAE transactions, 1997. 106: p. 9-20.
82. Nyberg, M., A. Perkovic, and L. Nielsen, Model Based Diagnosis of Leaks in the Air Intake System of an SI-Engine, in SAE International Congress & Exposition. 1998: Detroit, MI.