Surface characterization of Ti and Y-TZP following non-thermal plasma exposure

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 99 B, Issue 1, 2011, Pages 199-206

  Silva, Nelson R F A ^a   Coelho, Paulo G ^a   Valverde, Guilherme B ^a   Becker, Kurt ^b   Ihrke, Roland ^c   Quade, Antje ^c   Thompson, Van P ^a  

^a NEW YORK UNIVERSITY COLLEGE OF DENTISTRY   (United States)

^b POLYTECHNIC UNIVERSITY   (United States)

^c INP Greifswald   (Germany)

Author keywords

adhesive; contact angle; non thermal plasma; surface energy; titanium; wettability; Y TZP

Indexed keywords

APPLICATION PROTOCOLS; NONTHERMAL PLASMA; SURFACE CHARACTERIZATION; SURFACE ENERGIES; Y-TZP;

CONTACT ANGLE; INTERFACIAL ENERGY; PHOTOELECTRON SPECTROSCOPY; SURFACE CHEMISTRY; TITANIUM; X RAY PHOTOELECTRON SPECTROSCOPY;

YTTRIUM ALLOYS;

CARBON; METAL OXIDE; OXYGEN; TETRAGONAL ZIRCONIA POLYCRYSTAL; TITANIUM; UNCLASSIFIED DRUG;

ARTICLE; CHEMICAL ANALYSIS; CHEMICAL BOND; CONTACT ANGLE; CONTROLLED STUDY; ENERGY; NON THERMAL PLASMA TECHNOLOGY; QUANTITATIVE ANALYSIS; REDUCTION; SURFACE PROPERTY; WETTABILITY; X RAY PHOTOELECTRON SPECTROSCOPY;

MATERIALS TESTING; PHOTOELECTRON SPECTROSCOPY; PLASMA GASES; SURFACE PROPERTIES; TITANIUM; WETTABILITY; YTTRIUM; ZIRCONIUM;

EID: 80052312058     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31887     Document Type: Article

References (54)

1. Mair L, Padipatvuthikul P,. Variables related to materials and preparing for bond strength testing irrespective of the test protocol. Dent Mater 2010; 26: e17-e23.
2. Yoshida K, Atsuta M,. Effects of adhesive primers for noble metals on shear bond strengths of resin cements. J Dent 1997; 25: 53-58. (Pubitemid 127412650)
3. Matinlinna JP, Vallittu PK,. Silane based concepts on bonding resin composite to metals. J Contemp Dent Pract 2007; 8: 1-8.
4. Rochette AL,. Attachment of a splint to enamel of lower anterior teeth. J Prosthet Dent 1973; 30: 418-423.
5. Tanaka T, Atsuta M, Uchiyama Y, Kawashima I,. Pitting corrosion for retaining acrylic resin facings. J Prosthet Dent 1979; 42: 282-291.
6. Livaditis GJ, Thompson VP,. Etched castings: An improved retentive mechanism for resin-bonded retainers. J Prosthet Dent 1982; 47: 52-58.
7. Wiedemann W, Klinger HG, Hubers B, Topitsch F,. [Sandblasting instead of etching?]. Dtsch Zahnarztl Z 1982; 37: 904-907.
8. Thompson VP, Del Castillo E, Livaditis GJ,. Resin-bonded retainers. Part I: Resin bond to electrolytically etched nonprecious alloys. J Prosthet Dent 1983; 50: 771-779.
9. Hummel SK, Pace LL, Marker VA,. A comparison of two silicoating techniques. J Prosthodont 1994; 3: 108-113.
10. Hansson O, Moberg LE,. Evaluation of three silicoating methods for resin-bonded prostheses. Scand J Dent Res 1993; 101: 243-251.
11. Moulin P, Degrange M, Picard B,. Influence of surface treatment on adherence energy of alloys used in bonded prosthetics. J Oral Rehabil 1999; 26: 413-421.
12. Kern M, Thompson VP,. Sandblasting and silica-coating of dental alloys: Volume loss, morphology and changes in the surface composition. Dent Mater 1993; 9: 151-161.
13. Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA,. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater 2008; 24: 1400-1404.
14. Artopoulou I-I, O'Keefe KL, Powers JM,. Effect of core diameter and surface treatment on the retention of resin composite cores to prefabricated endodontic posts. J Prosthodont 2006; 15: 172-179. (Pubitemid 43653912)
15. Horn HR,. A new lamination: Porcelain bonded to enamel. N Y State Dent J 1983; 49: 401-403.
16. Smith DC, Pulver F,. Aesthetic dental veneering materials. Int Dent J 1982; 32: 223-239.
17. Stangel I, Nathanson D, Hsu CS,. Shear strength of the composite bond to etched porcelain. J Dent Res 1987; 66: 1460-1465.
18. Sorensen JA, Engelman MJ, Torres TJ, Avera SP,. Shear bond strength of composite resin to porcelain. Int J Prosthodont 1991; 4: 17-23.
19. Derand T, Molin M, Kvam K,. Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater 2005; 21: 1158-1162. (Pubitemid 41606212)
20. Blatz MB, Sadan A, Kern M,. Resin-ceramic bonding: A review of the literature. J Prosthet Dent 2003; 89: 268-274. (Pubitemid 37304971)
21. Chaiyabutr Y, McGowan S, Phillips KM, Kois JC, Giordano RA,. The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic. J Prosthet Dent 2008; 100: 194-202.
22. Kumbuloglu O, Lassila LV, User A, Vallittu PK,. Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent 2006; 31: 248-255. (Pubitemid 43633135)
23. Zhang Y, Lawn BR, Malament KA, Van Thompson P, Rekow ED,. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 2006; 19: 442-448. (Pubitemid 44495200)
24. Wegner SM, Kern M,. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2000; 2: 139-147.
25. Aboushelib MN, Feilzer AJ, Kleverlaan CJ,. Bonding to Zirconia using a new surface treatment. J Prosthodont 2010; 19: 340-346.
26. Glantz PO,. Adhesiveness of teeth. J Colloid Interface Sci 1971; 37: 281-290.
27. Perdigao J,. New developments in dental adhesion. Dent Clin North Am 2007; 51: 333-357, viii.
28. Eick JD, Johnson LN, Fromer JR, Good RJ, Neumann AW,. Surface topography: Its influence on wetting and adhesion in a dental adhesive system. J Dent Res 1972; 51: 780-788.
29. Marmur A,. Adhesion and wetting in an aqueous environment: Theoretical assessment of sensitivity to the solid surface energy. Langmuir 2004; 20: 1317-1320.
30. Al-Omari WM, Mitchell CA, Cunningham JL,. Surface roughness and wettability of enamel and dentine surfaces prepared with different dental burs. J Oral Rehabil 2001; 28: 645-650. (Pubitemid 33755262)
31. Comyn J,. Contact angles and adhesive bonding. Int J Adhes Adhes 1992; 12: 145-149.
32. Tani C, Manabe A, Itoh K, Hisamitsu H, Wakumoto S,. Contact angle of dentin bonding agents on the dentin surface. Dent Mater J 1996; 15: 39-44. (Pubitemid 126416267)
33. Wege HA, Aguilar JA, Rodriguez-Valverde MA, Toledano M, Osorio R, Cabrerizo-Vilchez MA,. Dynamic contact angle and spreading rate measurements for the characterization of the effect of dentin surface treatments. J Colloid Interface Sci 2003; 263: 162-169. (Pubitemid 36692835)
34. Ayad MF, Johnston WM, Rosenstiel SF,. Influence of dental rotary instruments on the roughness and wettability of human dentin surfaces. J Prosthet Dent 2009; 102: 81-88.
35. Yanagida H, Tanoue N, Ide T, Matsumura H,. Evaluation of two dual-functional primers and a tribochemical surface modification system applied to the bonding of an indirect composite resin to metals. Odontology 2009; 97: 103-108.
36. Fonseca RG, de Almeida JGdSP, Haneda IG, Adabo GL,. Effect of metal primers on bond strength of resin cements to base metals. J Prosthet Dent 2009; 101: 262-268.
37. Foest R, Kindel E, Ohl A, Stieber M, Weltmann KD,. Non-thermal atmospheric pressure discharges for surface modification. Plasma Phys Control Fusion 2005; 47: B525-B536. (Pubitemid 41612051)
38. Fridman A,. Plasma Chemistry. New York: Cambridge University Press; 2008. p 978.
39. Stoffels E, Flikweert AJ, Stoffels WW, Kroesen GMW,. Plasma needle: A non-destructive atmospheric plasma source for fine surface treatment of (bio)materials. Plasma Source Sci Technol 2002; 11: 383-388. (Pubitemid 35433980)
40. Weltmann KD, Kindel E, Brandenburg R, Meyer C, Bussiahn R, Wilke C, von Woedtke T,. Atmospheric pressure plasma jet for medical therapy: Plasma parameters and risk estimation. Contrib Plasma Phys 2009; 49: 631-640.
41. Choi HY, Kim SH, Jang J,. Self-organized organic thin-film transistors on plastic. Adv Mater 2004; 16: 732-736.
42. Owens DK, Wendt RC,. Estimation of surface free energy of polymers. J Appl Polym Sci 1969; 13: 1741-1747.
43. Janssen D, De Palma R, Verlaak S, Heremans P, Dehaen W,. Static solvent contact angle measurements, surface free energy and wettability determination of various self-assembled monolayers on silicon dioxide. Thin Solid Films 2006; 515: 1433-1438. (Pubitemid 44716032)
44. Kwok DY, Gietzelt T, Grundke K, Jacobasch HJ, Neumann AW,. Contact angle measurements and contact angle interpretation. 1. Contact angle measurements by axisymmetric drop shape analysis and a goniometer sessile drop technique. Langmuir 1997; 13: 2880-2894. (Pubitemid 127648920)
45. Carre A,. Polar interactions at liquid/polymer interfaces. J Adhes Sci Technol 2007; 21: 961-981. (Pubitemid 47186912)
46. Tsujimoto A, Iwasa M, Shimamura Y, Murayama R, Takamizawa T, Miyazaki M,. Enamel bonding of single-step self-etch adhesives: Influence of surface energy characteristics. J Dent 2010; 38: 123-130.
47. Friedman A,. Plasma Chemistry; 2008. p 644.
48. Chu PK, Chen JY, Wang LP, Huang N,. Plasma-surface modification of biomaterials. Mater Sci Eng R-Report 2002; 36: 143-206.
49. Hossain MM, Herrmann AS, Hegemann D,. Plasma hydrophilization effect on different textile structures. Plasma Process Polym 2006; 3: 299-307.
50. Buonocore MG,. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res 1955; 34: 849-853.
51. Aguilar-Mendoza JA, Rosales-Leal JI, Rodriguez-Valverde MA, Cabrerizo-Vilchez MA,. Effect of acid etching on dentin wettability and roughness: Self-etching primers versus phosphoric acid. J Biomed Mater Res B Appl Biomater 2008; 84: 277-285.
52. Yang B, Barloi A, Kern M,. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010; 26: 44-50.
53. Haag P, Nilner K,. Bonding between titanium and dental porcelain: A systematic review. Acta Odontol Scand. 2010 Jan 25. [Epub ahead of print]
54. Wolfart M, Lehmann F, Wolfart S, Kern M,. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2007; 23: 45-50. (Pubitemid 44880064)