New Developments in Dental Adhesion

Dental Clinics of North America

Volumn 51, Issue 2, 2007, Pages 333-357

  Perdigão, Jorge ^a  

^a UNIVERSITY OF MINNESOTA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE AGENT; BIOMEDICAL AND DENTAL MATERIALS; DENTIN BONDING AGENT; RESIN CEMENT; TOOTH CEMENT;

CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTIN; ENAMEL; HUMAN; MECHANICAL STRESS; METHODOLOGY; REVIEW; ULTRASTRUCTURE;

ACID ETCHING, DENTAL; ADHESIVES; DENTAL BONDING; DENTAL CEMENTS; DENTAL ENAMEL; DENTAL MATERIALS; DENTIN; DENTIN-BONDING AGENTS; HUMANS; RESIN CEMENTS; STRESS, MECHANICAL;

EID: 34249328886     PISSN: 00118532     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cden.2007.01.001     Document Type: Review

References (82)

1. Buonocore M.G. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res 34 (1955) 849-853
2. Swift E.J., Perdigão J., and Heymann H.O. Bonding to enamel and dentin: a brief story and state of the art. Quintessence Int 26 (1995) 95-110
3. Baier R.E. Principles of adhesion. Oper Dent Suppl 5 (1992) 1-9
4. Pashley D.H. The effects of acid etching on the pulpodentin complex. Oper Dent 17 (1992) 229-242
5. Asmussen E., and Uno S. Adhesion of restorative resin to dentin: chemical and physicochemical aspects. Oper Dent Suppl 5 (1992) 68-74
6. Bowen R.L., Eick J.D., Henderson D.A., et al. Smear layer: removal and bonding considerations. Oper Dent Suppl 3 (1984) 30-34
7. Eick J.D., Cobb C.M., Chapell R.P., et al. The dentinal surface: its influence on dentinal adhesion. Part I. Quintessence Int 22 (1991) 967-977
8. Suzuki T., and Finger W.J. Dentin adhesives: site of dentin vs. bonding of composite resins. Dent Mater 4 (1988) 379-383
9. Gwinnett A.J. Smear layer: morphological considerations. Oper Dent Suppl 3 (1984) 3-12
10. Perdigão J. Dentin bonding as function of dentin structure. Dent Clin North Am 46 (2002) 1-25
11. Nakabayashi N., Kojima K., and Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res 16 (1982) 265-273
12. Brännström M., and Nordenvall K.J. The effect of acid etching on enamel, dentin, and the inner surface of the resin restoration: a scanning electron microscopic investigation. J Dent Res 56 (1977) 917-923
13. Davidson C.L., de Gee A.J., and Feilzer A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res 63 (1984) 1396-1399
14. Perdigão J., Lambrechts P., Van Meerbeek B., et al. The interaction of adhesive systems with human dentin. Am J Dent 9 (1996) 167-173
15. Van Meerbeek B., De Munck J., Yoshida Y., et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 28 (2003) 215-235
16. Pashley D.H., and Tay F.R. Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater 17 (2001) 430-444
17. Van Meerbeek B., Perdigao J., Lambrechts P., et al. The clinical performance of dentin adhesives. J Dent 26 (1998) 1-20
18. Tay F.R., and Pashley D.H. Aggressiveness of contemporary self-etching systems. I: depth of penetration beyond smear layers. Dent Mater 17 (2001) 296-308
19. Perdigão J., Gomes G., and Lopes M.M. The influence of conditioning time on enamel adhesion. Quintessence Int 37 (2006) 41-47
20. Nishitani Y., Yoshiyama M., Wadgaonkar B., et al. Activation of gelatinolytic activity in dentin by self-etching adhesives. Eur J Oral Sci 114 (2006) 160-166
21. Van Landuyt K.L., De Munck J., Snauwaert J., et al. Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res 84 (2005) 183-188
22. Carvalho R.M., Stefano Chersoni S., Frankenberger R., et al. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 26 (2005) 1035-1042
23. Perdigão J., and Geraldeli S. Bonding characteristics of self-etching adhesives to intact vs. prepared enamel. J Esthet Restor Dent 15 (2003) 32-42
24. Kanemura N., Sano H., and Tagami J. Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces. J Dent 27 (1999) 523-530
25. Van Meerbeek B., De Munck J., Mattar D., et al. Microtensile bond strength of an etch&rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper Dent 28 (2003) 647-660
26. Goracci C., Sadek F.T., Monticelli F., et al. Microtensile bond strength of self-etching adhesives to enamel and dentin. J Adhes Dent 6 (2004) 313-318
27. Perdigão J., Gomes G., Duarte Jr. S., et al. Enamel bond strengths of pairs of adhesives from the same manufacturer. Oper Dent 30 (2005) 492-499
28. Armstrong S.R., Vargas M.A., Fang Q., et al. Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a self-etch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 5 (2003) 47-56
29. Tay F.R., Kwong S.-M., Itthagarun A., et al. Bonding of a self-etching primer to non-carious cervical sclerotic dentin: interfacial ultrastructure and microtensile bond strength evaluation. J Adhes Dent 2 (2000) 9-28
30. De Munck J., Vargas M., Iracki J., et al. One-day bonding effectiveness of new self-etch adhesives to bur-cut enamel and dentin. Oper Dent 30 (2005) 39-49
31. Tay F.R., Pashley D.H., Suh B.I., et al. Single-step adhesives are permeable membranes. J Dent 30 (2002) 371-382
32. Tay F.R., and Pashley D.H. Water treeing-a potential mechanism for degradation of dentin adhesives. Am J Dent 16 (2003) 6-12
33. De Munck J., Van Landuyt K., Coutinho E., et al. Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling. Dent Mater 21 (2005) 999-1007
34. Frankenberger R., and Tay F.R. Self-etch vs etch-and-rinse adhesives: Effect of thermo-mechanical fatigue loading on marginal quality of bonded resin composite restorations. Dent Mater 21 (2005) 397-412
35. Bergenholtz G. Evidence for bacterial causation of adverse pulpal responses in resin-based restorations. Crit Rev Oral Biol Med 11 (2000) 467-480
36. Sensi L.G., Lopes G.C., Monteiro Jr. S., et al. Dentin bond strength of self-etching primers/adhesives. Oper Dent 30 (2005) 63-68
37. Ito S., Tay F., Hashimoto M., et al. Effects of multiple coatings of two all-in-one adhesives on dentin bonding. J Adhes Dent 7 (2005) 133-141
38. Frankenberger R., Perdigao J., Rosa B.T., et al. "No-bottle" vs "multi-bottle" dentin adhesives-a microtensile bond strength and morphological study. Dent Mater 17 (2001) 373-380
39. Brackett M.G., Brackett W.W., and Haisch L.D. Microleakage of Class V resin composites placed using self-etching resins: effect of prior enamel etching. Quintessence Int 37 (2006) 109-113
40. Kubo S., Yokota H., Yokota H., et al. Microleakage of cervical composites restored with one-step self-etch systems. [abstract]. J Dent Res 84 Spec Iss A (2005)
41. Pashley D.H., Ciucchi B., Sano H., et al. Permeability of dentin to adhesive agents. Quintessence Int 24 (1993) 618-631
42. De Munck J., Van Meerbeek B., Yoshida Y., et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82 (2003) 136-140
43. Hashimoto M., Tay F.R., Ohno H., et al. SEM and TEM analysis of water degradation of human dentinal collagen. J Biomed Mater Res Part: B Appl Biomater 66 (2003) 289-298
44. Carrilho M.R., Carvalho R.M., Tay F.R., et al. Durability of resin-dentin bonds related to water and oil storage. Am J Dent 18 (2005) 315-319
45. Hashimoto M., Ohno H., Sano H., et al. Micromorphological changes in resin-dentin bonds after 1 year of water storage. J Biomed Mater Res Part: B Appl Biomater 63 (2002) 306-311
46. Santerre J.P., Shajii L., and Leung B.W. Relation of dental composite formulations to their degradation and the release of hydrolyzed polymeric-resin-derived products. Crit Rev Oral Biol Med 12 (2001) 136-151
47. Spreafico D., Semeraro S., Mezzanzanica D., et al. The effect of the air-blowing step on the technique sensitivity of four different adhesive systems. J Dent 34 (2006) 237-244
48. Tay F.R., King N.M., Chan K.M., et al. How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously?. J Adhes Dent 4 (2002) 255-269
49. Tay F.R., Lai C.N., Chersoni S., et al. Osmotic blistering in enamel bonded with one-step self-etch adhesives. J Dent Res 83 (2004) 290-295
50. Ito S., Hashimoto M., Wadgaonkar B., et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 26 (2005) 6449-6459
51. Hoffmann M., Eppinger R., Kastrani A., et al. FTIR conversion analysis of all-in-one adhesives using different methods. [abstract]. J Dent Res 85 spec issue A (2006)
52. Can Say E., Nakajima M., Senawongse P., et al. Microtensile bond strength of a filled vs unfilled adhesive to dentin using self-etch and total-etch technique. J Dent 34 (2006) 283-291
53. Türkün S.L. Clinical evaluation of a self-etching and an one bottle adhesive at two years. J Dent 31 (2003) 527-534
54. Van Meerbeek B., Kanumilli P., De Munck J., et al. A randomized controlled study evaluating the effectiveness of a two-step self-etch adhesive with and without selective phosphoric-acid etching of enamel. Dent Mater 21 (2005) 375-383
55. Miguez P.A., Castro P.S., Nunes M.F., et al. Effect of acid-etching on the enamel bond of two self-etching systems. J Adhes Dent 5 (2003) 107-112
56. Di Hipolito V., de Goes M.F., Carrilho M.R., et al. SEM evaluation of contemporary self-etching primers applied to ground and unground enamel. J Adhes Dent 7 (2005) 203-211
57. Perdigão J, Dutra-Corrêa M, Castilhos N, et al. One-year clinical performance of self-etch adhesives in posterior restorations. Am J Dent, in press.
58. 13C NMR and TEM findings. J Dent Res 85 (2006) 422-426
59. Perdigão J., Gomes G., Gondo R., et al. In vitro bonding performance of all-in-one adhesives. Part I-microtensile bond strengths. J Adhes Dent 8 (2006) 367-373
60. Pereira P.N., Okuda M., Sano H., et al. Effect of intrinsic wetness and regional difference on dentin bond strength. Dent Mater 15 (1999) 46-53
61. Atash R., and Van den Abbeele A. Bond strengths of eight contemporary adhesives to enamel and to dentine: an in vitro study on bovine primary teeth. Int J Paediatr Dent 15 (2005) 264-273
62. th generation bonding agents when used by operators with different bonding experience. J Adhes Dent 7 (2005) 57-64
63. Van Landuyt K.L., Peumans M., De Munck J., et al. Extension of a one-step self-etch adhesive into a multi-step adhesive. Dent Mater 22 (2006) 533-544
64. Ritter A.V., Heymann H., Pereira P., et al. Clinical evaluation of an all-in-one self-etching dental adhesive. [abstract]. J Dent Res 84 Spec Iss A (2005)
65. American Dental Association Council of Scientific Affairs. Acceptance program guidelines dentin and enamel adhesive materials. Available at: http://www.ada.org/ada/seal/standards/guide_materials_adhesive.pdf Accessed February 10, 2007.
66. Bittencourt D.D., Ezecelevski I.G., Reis A., et al. An 18-months' evaluation of self-etch and etch & rinse adhesive in non-carious cervical lesions. Acta Odontol Scand 63 (2005) 173-178
67. Inoue S., Vargas M.A., Abe Y., et al. Microtensile bond strength of eleven contemporary adhesives to enamel. Am J Dent 16 (2003) 329-334
68. Brackett W.W., Covey D.A., and St Germain Jr. H.A. One-year clinical performance of a self-etching adhesive in Class V resin composites cured by two methods. Oper Dent 27 (2002) 218-222
69. van Dijken J.W.V. Durability of three simplified adhesive systems in Class V non-carious cervical dentin lesions. Am J Dent 17 (2004) 27-32
70. Eliades G.C. Dentine bonding systems. In: Vanherle G., Degrange M., and Willems G. (Eds). State of the art on direct posterior filling materials and dentine bonding (1993), Van der Poorten, Leuven (Belgium) 49-74
71. Wang Y., Spencer P., Hager C., et al. Comparison of interfacial characteristics of adhesive bonding to superficial versus deep dentine using SEM and staining techniques. J Dent 34 (2006) 26-34
72. Wang Y., and Spencer P. Evaluation of the interface between one-bottle adhesive systems and dentin by Goldner's trichrome. Am J Dent 18 (2005) 66-72
73. Koshiro K., Inoue S., Tanaka T., et al. In vivo degradation of resin-dentin bonds produced by a self-etch vs. a total-etch adhesive system. Eur J Oral Sci 112 (2004) 368-375
74. Tay F.R., Gwinnett J.A., and Wei S.H. Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free acetone-based, single-bottle primer/adhesives. Dent Mater 12 (1996) 236-244
75. Lee Y.K., Pinzon L.M., O'Keefe K.L., et al. Effect of filler addition on the bonding parameters of dentin bonding adhesives bonded to human dentin. Am J Dent 19 (2006) 23-27
76. Platt J.A., Almeida J., Gozalez-Cabezas C., et al. The effect of double adhesive application on the shear bond strength to dentin of compomers using three one-bottle adhesive systems. Oper Dent 26 (2001) 313-317
77. Tyas M.J., and Burrow M.F. Three-year clinical evaluation of One-Step in non-carious cervical lesions. Am J Dent 15 (2002) 309-311
78. Brackett W.W., Brackett M.G., Dib A., et al. Eighteen-month clinical performance of a self-etching primer in unprepared class V resin restorations. Oper Dent 30 (2005) 424-429
79. Van Dijken J.W.V. Clinical evaluation of three adhesive systems in class V non-carious lesions. Dent Mater 16 (2000) 285-291
80. Loguerico A.D., Uceda-Gomez N., Carrilho M.R., et al. Influence of specimen size and regional variation on long-term resin-dentin bond strength. Dent Mater 21 (2005) 224-231
81. Reis A., Loguercio A.D., Azevedo C.L., et al. Moisture spectrum of demineralized dentin for adhesive systems with different solvent bases. J Adhes Dent 5 (2003) 183-192
82. Peumans M., Kanumilli P., De Munck J., et al. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Mater 21 (2005) 864-881