Mechanics of materials and structures: A simulation-driven design approach

Journal of Mechanics of Materials and Structures

Volumn 6, Issue 1-4, 2011, Pages 277-301

  Karlsson, Lennart ^a   Pahkamaa, Andreas ^a   Karlberg, Magnus ^a   Löfstrand, Magnus ^a   Goldak, John ^b   Pavasson, Jonas ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

^b CARLETON UNIVERSITY   (Canada)

Author keywords

Calibrated block dumping; Rotor dynamical simulations; Simulation driven design; Welding simulations

Indexed keywords

CALIBRATED BLOCK DUMPING; DESIGN APPROACHES; DESIGN SPACES; DYNAMICAL SIMULATION; ENGINEERING PRODUCT DEVELOPMENT; FUNDAMENTAL EQUATIONS; IDEAL SOLUTIONS; INDUSTRIAL SETTINGS; MECHANICS OF MATERIALS; OPTIMAL SOLUTIONS; POSSIBLE SOLUTIONS; SIMULATION METHODS; SIMULATION-DRIVEN DESIGN; TOOLS AND METHODS; WELDING SIMULATION; WELDING SIMULATIONS;

MECHANICS; PRODUCT DEVELOPMENT; WELDING;

DESIGN;

EID: 79960543807     PISSN: 15593959     EISSN: None     Source Type: Journal    
DOI: 10.2140/jomms.2011.6.277     Document Type: Article

References (59)

1. B. A. B. Andersson, "Thermal stresses in a submerged-arc welded joint considering phase transformations", J. Eng. Mater. Technol. .ASME/ 100:4 (1978), 356-362.
2. P. Åström, Simulation of manufacturing processes in product development, Ph.D. thesis, Luleå University of Technology, Luleå, 2004, Available at http://epubl.ltu.se/1402-1544/2004/56/index-en.html.
3. A. Barroso et al., "Prediction of welding residual stresses and displacements by simplified models: experimental validation", Mater. Des. 31:3 (2010), 1338-1349.
4. N. Bylund, Simulation driven product development applied to car body design, Ph.D. thesis, Luleå University of Technology, Luleå, 2004, Available at http://epubl.luth.se/1402-1544/2004/33/index-en.html.
5. Z. Cai and H. Zhao, "Efficient finite element approach for modelling of actual welded structures", Sci. Technol. Weld. Join. 8:3 (2003), 195-204.
6. Y. Chen and I. C. Sheng, "Residual stress in weldment", J. Therm. Stresses 15:1 (1992), 53-69.
7. D. W. Childs, "Fractional-frequency rotor motion due to nonsymmetric clearance effects", J. Eng. Power 104:3 (1982), 533-541.
8. D. Childs, Turbomachinery rotordynamics: phenomena, modeling and analysis, Wiley, New York, 1993.
9. F. Chu and Z. Zhang, "Periodic, quasi-periodic and chaotic vibrations of a rub-impact rotor system supported on oil film bearings", Int. J. Eng. Sci. 35:10-11 (1997), 963-973.
10. B. Courter, "Simulation-driven product development: will form finally follow function?", White paper, Space-Claim, Concord, MA, 2009, Available at http://files.spaceclaim.com/whitepapers/SPC.CAE.WhitePaper.web2.pdf.
11. N. Cross, Engineering design methods: strategies for product design, Wiley, Chichester, 2000.
12. D. Deng, K. Ogawa, S. Kiyoshima, N. Yanagida, and K. Saito, "Prediction of residual stresses in a dissimilar metal welded pipe with considering cladding, buttering and post weld heat treatment", Comput. Mater. Sci. 47:2 (2009), 398-408.
13. S. Edwards, A. W. Lees, and M. I. Friswell, "The influence of torsion on rotor/stator contact in rotating machinery", J. Sound Vib. 225:4 (1999), 767-778.
14. R. Ganesan, "Dynamic response and stability of a rotor-support system with non-symmetric bearing clearances", Mech. Mach. Theory 31:6 (1996), 781-798.
15. G. Genta, Vibration of structures and machines: practical aspects, Springer, New York, 1999.
16. J. S. Gero, "Design optimization", Comput.-Aided Des. 13:5 (1981), 252.
17. J. A. Goldak, "Distortion and residual stress in welds: the next generation", pp. 45-52 in Trends in welding research: proceedings of the 8th International Conference (Pine Mountain, GA, 2008), edited by S. A. David et al., ASM International, Materials Park, OH, 2009.
18. J. A. Goldak and M. Akhlaghi, Computational welding mechanics, Springer, New York, 2005.
19. J. A. Goldak, B. Patel, M. Bibby, and J. Moore, "Computational weld mechanics", AGARD Conf. Proc. 398 (1986), 1-32.
20. J. A. Goldak et al., "Designer driven analysis of welded structures", pp. 1025-1038 in Mathematical modelling of weld phenomena 8 (Graz, 2006), edited by H.-H. Cerjak et al., Technische Universität Graz, Graz, 2007.
21. Goldak Technologies, "VrWeld", 2010, Available at http://www.goldaktec.com/vrweld.html.
22. P. Goldman and A. Muszynska, "Rotor-to-stator, rub-related, thermal/mechanical effects in rotating machinery", Chaos Solitons Fractals 5:9 (1995), 1579-1601.
23. H. R. Hansen, "Application of optimization methods within structural design: practical design example", Comput. Struct. 4:1 (1974), 213-220.
24. T. A. Harris, Rolling bearing analysis, Wiley, New York, 1991.
25. H. H. Jeffcott, "XXVII. The lateral vibration of loaded shafts in the neighbourhood of a whirling speed.-The effect of want of balance", Philos. Mag. (6) 37:219 (1919), 304-314.
26. M. Karlberg, "Approximated stiffness coefficients in rotor systems supported by bearings with clearance", Int. J. Rotat. Mach. 2010 (2010). Article ID 540101.
27. M. Karlberg and J.-O. Aidanpää, "Numerical investigation of an unbalanced rotor system with bearing clearance", Chaos Solitons Fractals 18:4 (2003), 653-664.
28. M. Karlberg and J.-O. Aidanpää, "Investigation of an unbalanced rotor system with bearing clearance and stabilising rods", Chaos Solitons Fractals 20:2 (2004), 363-374.
29. M. Karlberg and J.-O. Aidanpää, "Rotordynamical modelling of a fibre refiner during production", J. Sound Vib. 303:3-5 (2007), 440-454.
30. M. Karlberg, M. Karlsson, L. Karlsson, and M. Näsström, "Dynamics of rotor systems with clearance and weak pedestals in full contact", in 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery: ISROMAC 13 (Honolulu, HI, 2010), International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 13, Curran Associates, Red Hook, NY, 2010.
31. L. Karlsson, "Thermal stresses in welding", pp. 299-389 in Thermal stresses I, edited by R. B. Hetnarski, Elsevier, Amsterdam, 1986.
32. L. Karlsson, M. Jonsson, L.-E. Lindgren, M. Näsström, and L. Troive, "Residual stresses and deformations in a welded thin-walled pipe", pp. 7-11 in Weld residual stresses and plastic deformation (Honolulu, HI, 1989), edited by E. Rybicki et al., Pressure Vessels and Piping 173, ASME, New York, 1989.
33. D. E. LaCourse, Handbook of solid modeling, McGraw-Hill, New York, 1995.
34. C.-H. Lee, K.-H. Chang, and C.-Y. Lee, "Comparative study of welding residual stresses in carbon and stainless steel butt welds", Proc. Inst. Mech. Eng. B, J. Eng. Manuf. 222:12 (2008), 1685-1694.
35. L.-E. Lindgren, "Finite element modeling and simulation of welding, 2: Improved material modeling", J. Therm. Stresses 24:3 (2001), 195-231.
36. L.-E. Lindgren, "Finite element modeling and simulation of welding, 1: Increased complexity", J. Therm. Stresses 24:2 (2001), 141-192.
37. L.-E. Lindgren, "Finite element modeling and simulation of welding, 3: Efficiency and integration", J. Therm. Stresses 24:4 (2001), 305-334.
38. L.-E. Lindgren, Computational welding mechanics: thermomechanical and microstructural simulations, CRC Press, Boca Raton, FL, 2007.
39. M. Mochizuki, M. Hayashi, and T. Hattori, "Numerical analysis of welding residual stress and its verification using neutron diffraction measurement", J. Eng. Mater. Technol. .ASME/ 122:1 (2000), 98-103.
40. A. Muszynska and P. Goldman, "Chaotic responses of unbalanced rotor/bearing/stator systems with looseness or rubs", Chaos Solitons Fractals 5:9 (1995), 1683-1704.
41. K. Ogawa, D. Deng, S. Kiyoshima, N. Yanagida, and K. Saito, "Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment", Comput. Mater. Sci. 45:4 (2009), 1031-1042.
42. A. Pahkamaa, L. Karlsson, and J. Pavasson, "A method to improve efficiency in welding simulations for simulation driven design", pp. 81-90 in Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference .IDETC/CIE2010/, 3: 30th Computers and Information in Engineering Conference (Montreal, 2010), ASME, New York, 2010.
43. E. Ramm, Nonlinear finite element analysis in structural mechanics: strategies for tracing the nonlinear response of near limit points, Springer, Berlin, 1981.
44. W. A. Rankine, "On the centrifugal force of rotating shafts", Eng. 27 (1869), 249.
45. Y. Saad, Iterative methods for sparse linear systems, PWS, Boston, 1996. 2nd ed. published by SIAM, Philadelphia, 2003.
46. U. Sellgren, Simulation driven design: a functional view of the design process, Licentiate thesis, Royal Institute of Technology, Stockholm, 1995, Available at http://www.md.kth.se/~ulfs/Research/LIC/LIC_main.pdf.
47. P. G. Smith and D. G. Reinertsen, Developing products in half the time: new rules, new tools, Wiley, New York, 1998.
48. M. C. Smith and A. C. Smith, "NeT bead-on-plate round robin: comparison of residual stress predictions and measurements", Int. J. Press. Vessels Pip. 86:1 (2009), 79-95.
49. M. C. Smith and A. C. Smith, "NeT bead-on-plate round robin: comparison of transient thermal predictions and measurements", Int. J. Press. Vessels Pip. 86:1 (2009), 96-109.
50. L. Troive, M. Näsström, and M. Jonsson, "Experimental and numerical study of multi-pass welding process of pipe-flange joints", J. Press. Vessel Technol. .ASME/ 120:3 (1998), 244-251.
51. C. E. Truman and M. C. Smith, "The NeT residual stress measurement and modelling round robin on a single weld bead-on-plate specimen", Int. J. Press. Vessels Pip. 86:1 (2009), 1-2.
52. Y. Ueda and M. G. Yuan, "Prediction of residual stresses in butt welded plates using inherent strains", J. Eng. Mater. Technol. .ASME/ 115:4 (1993), 417-423.
53. Y. Ueda, K. Fukuda, and Y. C. Kim, "New measuring method of axisymmetric three-dimensional residual stresses using inherent strains as parameters", J. Eng. Mater. Technol. .ASME/ 108:4 (1986), 328-334.
54. Y. Ueda, Y. C. Kim, and M. G. Yuan, "A predicting method of welding residual stress using source of residual stress", Q. J. Jpn. Weld. Soc. 6:1 (1988), 59-64.
55. K. T. Ulrich and S. D. Eppinger, Product design and development, McGraw-Hill, New York, 1995.
56. I. Voutchkov, A. J. Keane, A. Bhaskar, and T. M. Olsen, "Weld sequence optimization: the use of surrogate models for solving sequential combinatorial problems", Comput. Methods Appl. Mech. Eng. 194:30-33 (2005), 3535-3551.
57. J. Wall, Simulation-driven design of complex mechanical and mechatronic systems, Ph.D. thesis, Blekinge Institute of Technology, Karlskrona, 2007, Available at http://tinyurl.com/Wall-2007-diss.
58. S. C. Wheelwright and K. B. Clark, Revolutionizing product development: quantum leaps in speed, efficiency and quality, Free Press, New York, 1992.
59. P. Wriggers and J. C. Simo, "A general procedure for the direct computation of turning and bifurcation points", Int. J. Numer. Methods Eng. 30:1 (1990), 155-176.