Comparative study of welding residual stresses in carbon and stainless steel butt welds

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 222, Issue 12, 2008, Pages 1685-1694

  Lee, C H ^a   Chang, K H ^b   Lee, C Y ^b  

^a Korea Institute of Civil Engineering and Building Technology   (South Korea)

^b Chung Ang University   (South Korea)

Author keywords

Carbon steel butt welds; Finite element simulation; Stainless steel butt welds; Thermal properties; Welding residual stresses

Indexed keywords

CARBON STEEL; CORROSION RESISTANT ALLOYS; FINITE ELEMENT METHOD; INERT GAS WELDING; PIPE; RESIDUAL STRESSES; STEEL; STEEL CORROSION; STEEL METALLURGY; STRENGTH OF MATERIALS; STRUCTURAL MEMBERS; THERMODYNAMIC PROPERTIES; THREE DIMENSIONAL; WELDED STEEL STRUCTURES; WELDING; WELDS;

COMPARATIVE STUDIES; FE MODELS; FE SIMULATIONS; FINITE ELEMENT SIMULATION; FINITE ELEMENTS; MATERIAL STRESSES; PRESSURIZED PIPES; SIMULATION METHODOLOGIES; SIMULATION TOOLS; STAINLESS STEEL WELDS; THERMAL PROPERTIES; THERMO MECHANICALS; WELDED PLATES; WELDED STRUCTURES; WELDING RESIDUAL STRESSES;

STAINLESS STEEL;

EID: 57649242792     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM1244     Document Type: Article

References (24)

1. Gardner, L. The use of stainless steel in structures. Prog. Struct. Engng Mater., 2005, 7, 48-55.
2. Taljat, B., Radhakrishnan, B., and Zacharia, T. Numerical analysis of GTA welding process with emphasis on post-solidification phase transformation effects on the residual stresses. Mater. Sci. Engng A, 1998, 246, 45-54.
3. Hibbitt, H. D. and Marcal, P. V. A numerical thermomechanical model for the welding and subsequent loading of fabrication structure. Comput. Struct., 1973, 3, 1145-1174.
4. Jonsson, M., Karlsson, L., and Lindgren, L. E. Deformations and stresses in butt-welding of large plates with special reference to the mechanical material properties. J. Engng Mater. Technol., 1985, 107, 265-270.
5. Goldak, J., Bibby, M., Moore, J., House, J. R., and Patel, B. Computer modeling of heat flow in welds. Metall. Mater. Trans. B, 1986, 17, 587-600.
6. Teng, T. L., Fung, C. P., Chang, P. H., and Yang, W. C. Analysis of residual stress and distortion in T-joint fillet welds. Int. J. Pressure Vessels Piping, 2001, 78, 523-538.
7. Teng, T. L., Chang, P. H., and Tseng, W. C Effect of welding sequence on residual stresses. Comput. Struct., 2003, 81, 273-286.
8. Chang, P. H. and Teng, T. L. Numerical and experimental investigations on the residual stresses of the butt-welded joints. Comput. Mater. Sci., 2004, 29, 511-522.
9. Abid, M. and Siddique, M. Numerical simulation to study the effect of tack welds and root gap on welding deformations and residual stresses of a pipe-flange joint. Int. J. Pressure Vessels Piping, 2005, 82, 860-871.
10. Deng, D., Liang, W., and Murakawa, H. Determination of welding deformation in fillet-welded joint by means of numerical simulation and comparison with experimental measurements. J. Mater. Processing Technol., 2007, 183, 219-225.
11. Lee, C. H. and Chang, K. H. Numerical analysis of residual stresses in welds of similar or dissimilar steel weldments under superimposed tensile loads. Comput. Mater. Sci., 2007, 40, 548-556.
12. Deng, D. and Murakawa, H. Prediction of welding distortion and residual stress in a thin plate butt-welded joint. Comput. Mater. Sci., 2008, 43, 353-365.
13. Brickstad, B. and Josefson, B. L. A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes. Int. J. Pressure Vessels Piping, 1998, 75, 11-25.
14. Mochizuki, M., Hayashi, M., and Hattori, T. Numerical analysis of welding residual stress and its verification using neutron diffraction measurement. J. Engng Mater. Technol., 2000, 122, 98-103.
15. Yaghi, A., Hyde, T. H., Becker, A. A., Sun, W., and Williams, J. A. Residual stress simulation in thin and thick-walled stainless steel pipe welds including pipe diameter effects. Int. J. Pressure Vessels Piping, 2006, 83, 864-874.
16. Dong, P. Residual stress analyses of a multi-pass girth weld: 3-D special shell versus axisymmetric models. J. Pressure Vessel Technol., 2001, 123, 207-213.
17. Deng, D. and Murakawa, H. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements. Comput. Mater. Sci., 2006, 37(3), 269-277.
18. Lee, C. H. A study on the mechanical characteristics of high strength steel for the application to a steel bridge, PhD Thesis, Chung-Ang University, Korea, 2005.
19. Pardo, E. and Weckman, D. C Prediction of weld pool and reinforcement dimensions of GMA welds using a finite element model. Metall. Mater. Trans. B, 1989, 20, 937-947.
20. Deng, D., Murakawa, H., and Liang, W. Numerical and experimental investigations on welding residual stress in multi-pass butt-welded austenitic stainless steel pipe. Comput. Mater. Sci., 2008, 42, 234-244.
21. Chang, K. H. and Lee, C. H. Residual stresses and fracture mechanics analysis of a crack in welds of high strength steels. Engng Fracture Mechanics, 2007, 74, 980-994.
22. Lee, S. H. and Chang, K. H. Prediction of stress and deformation by 2D and 3D-FEM analysis and its accuracy. J. of the Computational Structural Engineering Institute of Korea (COSEIK), 2004, 17, 365-375.
23. Sattari-Far, I. and Javadi, Y. Influence of welding sequence on welding distortions in pipes. Int. J. Pressure Vessels Piping, 2008, 85, 265-274.
24. Paradowska, A., Price, J. W. H., Ibrahim, R., and Finlayson, T. A neutron diffraction study of residual stress due to welding. J. Mater. Processing Technol., 2005, 164-165, 1099-1105.