Development of solution buffer layers for RABiTS based YBCO coated conductors

IEEE Transactions on Applied Superconductivity

Volumn 21, Issue 3 PART 3, 2011, Pages 3059-3061

  Paranthaman, M P ^a   Qiu, X ^a   List, F A ^a   Kim, K ^a   Zhang, Y ^a   Li, X ^b   Sathyamurthy, S ^b   Thieme, C ^b   Rupich, M W ^b  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

^b AMERICAN SUPERCONDUCTOR CORPORATION   (United States)

Author keywords

Buffer layers; Sol gel processing; Thin films; YBCO coated conductors

Indexed keywords

BARRIER LAYERS; BIAXIALLY TEXTURED; BUFFER ARCHITECTURE; CAP LAYERS; CRACK FREE; EPITAXIAL THIN FILMS; METAL ORGANIC DEPOSITION; METAL TAPES; MOD-YBCO; OUT-OF-PLANE TEXTURES; PER UNIT; PHYSICAL VAPOR DEPOSITED; SEED LAYER; SOL-GEL PROCESSING; SOLUTION BUFFER; THREELAYER ARCHITECTURE; XRD STUDIES; YBCO COATED CONDUCTORS;

BUFFER LAYERS; COPPER; CRITICAL CURRENT DENSITY (SUPERCONDUCTIVITY); DEPOSITION; EPITAXIAL FILMS; EPITAXIAL GROWTH; GADOLINIUM; OPTICAL WAVEGUIDES; SOL-GEL PROCESS; STANDARDIZATION; SUBSTRATES; SUPERCONDUCTING FILMS; TEXTURES; TUNGSTEN; VAPOR DEPOSITION; ZIRCONIUM;

YTTRIUM BARIUM COPPER OXIDES;

EID: 79957935731     PISSN: 10518223     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASC.2010.2092731     Document Type: Article

References (14)

1. M. P. Paranthaman and T. Izumi, Eds., "High-performance YBCOcoated superconductor wires," MRS Bulletin, vol. 29, pp. 533-536, 2004.
2. M. P. Paranthaman, "Superconductor wires," in McGraw-Hill 2006 Yearbook of Science and Technology. New York: McGraw-Hill Publishers, 2006, pp. 319-322.
3. A. Goyal, M. Paranthaman, and U. Schoop, "The RABiTS approach: Using rolling-assisted biaxially textured substrates for high-performance YBCO superconductors," MRS Bulletin, vol. 29, pp. 552-561, Aug. 2004.
4. M. W. Rupich, D. T. Verebelyi, W. Zhang, T. Kodenkandath, and X. Li, "Metalorganic deposition of YBCO films for second-generation high-temperature superconductor wires," MRS Bulletin, vol. 29, pp. 572-578, 2004.
5. C. J. Brinker, A. J. Hurd, P. R. Schunk, G. C. Frye, and C. S. Ashley, "Review of sol-gel thin film formation," J. Non-Cryst. Solids, vol. 147, p. 424, 1992.
6. F. F. Lange, "Chemical solution routes to single-crystal thin films," Science, vol. 273, p. 903, 1996.
7. R. W. Schwartz, "Chemical solution deposition of perovskite thin films," Chem. Mater., vol. 9, p. 2325, 1997.
8. M. Paranthaman, T. G. Chirayil, F. A. List, X. Cui, A. Goyal, D. F. Lee, E. D. Specht, P. M. Martin, R. K. Williams, D. M. Kroeger, J. S. Morrell, D. B. Beach, R. Feenstra, and D. K. Christen, "Fabrication of long lengths of epitaxial buffer layers on biaxially textured nickel substrates using a continuous reel-to-reel dip-coating units," J. Amer. Ceram. Soc., vol. 84, p. 273, 2001.
9. S. Sathyamurthy, M. Paranthaman, L. Heatherly, P. M. Martin, E. D. Specht, A. Goyal, T. Kodenkandath, X. Li, and M. W. Rupich, "Solution- processed lanthanum zirconium oxide as a barrier layer for high I-c-coated conductors," J. Mater. Res., vol. 21, p. 910, 2006.
10. M. P. Paranthaman, S. Sathyamurthy, M. S. Bhuiyan, P. M. Martin, T. Aytug, K. Kim, M. Fayek, K. J. Leonard, J. Li, A. Goyal, T. Kodenkandath, X. Li, W. Zhang, and M. W. Rupich, "MOD buffer/YBCO approach to fabricate low-cost second generation HTS wires," IEEE Trans. Appl. Supercond., vol. 17, p. 3332, 2007.
11. 2 cap layer flatness," J. Mater. Res., vol. 24, p. 1446, 2009.
12. M. Paranthaman, A. Goyal, and M. W. Rupich, "ORNL-AMSC CRADA talk," in DOE Annual Superconductivity Peer Review Meeting, 2007.
13. 7 seed for all-MOD Buffer/YBCO coated conductors," Physica C, vol. 468, p. 1587, 2008.
14. M. S. Bhuiyan, M. Paranthaman, and S. Sathyamurthy, "Chemical solution- based epitaxial oxide films on biaxially textured Ni-w substrates with improved out-of-plane texture for YBCO-Coated conductors," J. Electr. Mater., vol. 36, p. 1270, 2007.