Wire rope fault detection in a hoisting winch system by motor torque and current signature analysis

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 5, 2011, Pages 1727-1736

  Henao, Humberto ^a   Rastegar Fatemi, Seyed Mohammad Javad ^a   Capolino, Gérard André ^a   Sieg Zieba, Sophie ^b  

^a UNIVERSITÉ DE PICARDIE JULES VERNE   (France)

^b CETIM   (France)

Author keywords

Diagnosis; fault detection; hoisting winch system; induction machine; load torque; mechanical fault; mechanical load; online condition monitoring; stator current; wire rope birdcaging

Indexed keywords

HOISTING WINCH SYSTEM; INDUCTION MACHINE; LOAD TORQUE; MECHANICAL FAULT; MECHANICAL LOAD; ONLINE CONDITION MONITORING; STATOR CURRENT;

CONDITION MONITORING; CRANES; FAULT DETECTION; SQUIRREL CAGE MOTORS; STATORS; TORQUE; TORQUE MEASUREMENT; WIRE; WIRE ROPE;

WINCHES;

EID: 79954454736     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2106095     Document Type: Article

References (45)

1. A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
2. F. Immovilli, M. Cocconcelli, A. Bellini, and R. Rubini, "Detection of generalized-roughness bearing fault by spectral-kurtosis energy of vibration or current signals," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4710-4717, Nov. 2009.
3. B. Trajin, J. Regnier, and J. Faucher, "Comparison between stator current and estimated mechanical speed for the detection of bearing wear in asynchronous drives," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4700-4709, Nov. 2009.
4. H. Zoubek, S. Villwock, and M. Pacas, "Frequency response analysis for rolling-bearing damage diagnosis," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4270-4276, Dec. 2008.
5. A. Ibrahim, M. El Badaoui, F. Guillet, and F. Bonnardot, "A new bearing fault detection method in induction machines based on instantaneous power factor," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4252-4259, Dec. 2008.
6. W. Zhou, T. G. Habetler, and R. G. Harley, "Bearing fault detection via stator current noise cancellation and statistical control," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4260-4269, Dec. 2008.
7. M. Blodt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1813-1822, Apr. 2008. (Pubitemid 351585994)
8. B. M. Ebrahimi, J. Faiz, and M. J. Roshtkhari, "Static-, dynamic-, and mixed-eccentricity fault diagnoses in permanent-magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4727-4739, Nov. 2009.
9. R. N. Andriamalala, H. Razik, L. Baghli, and F.-M. Sargos, "Eccentricity fault diagnosis of a dual-stator winding induction machine drive considering the slotting effects," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4238-4251, Dec. 2008.
10. M. Drif and A. J. M. Cardoso, "Airgap-eccentricity fault diagnosis, in three-phase induction motors, by the complex apparent power signature analysis," IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1404-1410, Mar. 2008. (Pubitemid 351447581)
11. S. H. Kia, H. Henao, and G. A. Capolino, "Analytical and experimental study of gearbox mechanical effect on the induction machine stator current signature," IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1405-1415, Jul./Aug. 2009.
12. S. H. Kia, H. Henao, and G.-A. Capolino, "Torsional vibration effects on induction machine current and torque signatures in gearbox-based electromechanical system," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4689-4699, Nov. 2009.
13. M. Blödt, M. Chabert, J. Regnier, and J. Faucher, "Mechanical load fault detection in induction motors by stator current time-frequency analysis," IEEE Trans. Ind. Appl., vol. 42, no. 6, pp. 1454-1463, Nov./Dec. 2006. (Pubitemid 44824046)
14. M. Blodt, J. Regnier, M. Chabert, and J. Faucher, "Fault indicators for stator current based detection of torque oscillations in induction motors at variable speed using time-frequency analysis," in Proc. 3rd IET Int. Conf. Power Electron., Mach. Drives, Mar. 2006, pp. 56-60.
15. R. R. Obaid and T. G. Habetler, "Current-based algorithm for mechanical fault detection in induction motors with arbitrary load conditions," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 2003, vol. 2, pp. 1347-1351.
16. H. Henao, S. M. J. Rastegar Fatemi, S. Sieg-Zieba, and G. A. Capolino, "Detection of birdcaging in steel wire rope of a hoisting winch system by analysis of load torque and stator current," in Proc. IEEE Int. SDEMPED, Aug. 31-Sep. 3, 2009, pp. 1-6.
17. G. Piskoty, M. Zgraggena, B. Weissea, C. Affoltera, and G. Terrasia, "Structural failures of rope-based systems," Eng. Failure Anal., vol. 16, no. 6, pp. 1929-1939, Sep. 2009.
18. C. R. Chaplin, "Failure mechanisms in wire ropes," Eng. Failure Anal., vol. 2, no. 1, pp. 45-57, Mar. 1995.
19. K. Schrems and D. Maclaren, "Failure analysis of a mine hoist rope," Eng. Failure Anal., vol. 4, no. 1, pp. 25-38, Mar. 1997.
20. J. R. Wait, "Review of electromagnetic methods in nondestructive testing of wire ropes," Proc. IEEE, vol. 67, no. 6, pp. 892-903, Jun. 1979.
21. H. R. Weischedel, The Magnetic Flux Leakage Inspection of Wire Ropes, NDT Technologies, Inc., 19 pp. [Online]. Available: http://www. ndttech.com/Papers/FluxLeakageWireRopes.pdf
22. G. Wei and C. Jianxin, "A transducer made up of fluxgate sensors for testing wire rope defects," IEEE Trans. Instrum. Meas., vol. 51, no. 1, pp. 120-124, Feb. 2002. (Pubitemid 34414795)
23. C. Jomdecha and A. Prateepasen, "Design of modified electromagnetic main-flux for steel wire rope inspection," NDT & E Int., vol. 42, no. 1, pp. 77-83, Jan. 2009.
24. Health and Safety Executive, Wire Rope Non-Destructive Testing-Survey of Instrument Manufacturers, Offshore Technology Report, 2000. [Online]. Available: http://www.hse.gov.uk/research/otopdf/2000/ oto00064.pdf
25. Health and Safety Executive, Wire Rope Offshore-A Critical Review of Wire Rope Endurance Research Affecting Offshore Applications, Offshore Technology Report, 1991, 319 pp. [Online]. Available: http:// www.hse.gov.uk/research/ othpdf/200-399/oth341.pdf
26. N. F. Caseya and P. A. A. Laura, "A review of the acoustic-emission monitoring of wire rope," Ocean Eng., vol. 24, no. 10, pp. 935-947, Nov. 1997. (Pubitemid 127425524)
27. G. Drummond, J. F. Watson, and P. P. Acarnley, "Acoustic-emission from wire ropes during proof load and fatigue testing," NDT & E Int., vol. 40, no. 1, pp. 94-101, Jan. 2007. (Pubitemid 44550087)
28. D. M. Stump and G. H. M. van der Heijden, "Birdcaging and the collapse of rods and cables in fixed-grip compression," Int. J. Solids Struct., vol. 38, no. 24, pp. 4265-4278, Jun. 2001. (Pubitemid 32480820)
29. N. S. Ermolaeva, J. Regelink, and M. P. M. Krutzen, "Hockling behaviour of single-and multiple-rope systems," Eng. Failure Anal., vol. 15, no. 1/2, pp. 142-153, Jan.-Mar. 2008. (Pubitemid 47355168)
30. A. R. T. de Silva and L. W. Fong, "Effect of abrasive wear on the tensile strength of steel wire rope," Eng. Failure Anal., vol. 9, no. 3, pp. 349-358, Jun. 2002. (Pubitemid 34235520)
31. M. Giglio and A. Manes, "Bending fatigue tests on a metallic wire rope for aircraft rescue hoists," Eng. Failure Anal., vol. 10, no. 2, pp. 223-235, Apr. 2003. (Pubitemid 36357585)
32. D. K. Zhang, S. R. Ge, and Y. H. Qiang, "Research on the fatigue and fracture behavior due to the fretting wear of steel wire in hoisting rope," Wear, vol. 255, no. 7-12, pp. 1233-1237, Aug./Sep. 2003. (Pubitemid 37002343)
33. J. Ma, S. Ge, and D. Zhang, "Distribution of wire deformation within strands of wire ropes," J. China Univ. Mining Technol., vol. 18, no. 3, pp. 475-478, Sep. 2008.
34. C. Mapelli and S. Barella, "Failure analysis of a cableway rope," Eng. Failure Anal., vol. 16, no. 5, pp. 1666-1673, Jul. 2009.
35. I. Ridge, C. R. Chaplin, and J. Zheng, "Effect of degradation and impaired quality on wire rope bending over sheave fatigue endurance," Eng. Failure Anal., vol. 8, no. 2, pp. 173-187, Apr. 2001.
36. C. R. Chaplin, "Interactive fatigue in wire rope applications," Proc. Symp. MoSS, Keynote Lecture, Jul. 2008, 12 pp. [Online]. Available: http://wwwcgi.rdg.ac.uk/web/FILES/cme/cme-chaplin- InteractiveFatigue.pdf
37. H. Usabiaga and J. M. Pagalday, "Analytical procedure for modelling recursively and wire by wire stranded ropes subjected to traction and torsion loads," Int. J. Solids Struct., vol. 45, no. 21, pp. 5503-5520, Oct. 2008.
38. K. Feyrer, Wire Ropes-Tension, Endurance, Reliability. Berlin, Germany: Springer-Verlag, 2007.
39. I. Ridge, "Tension-torsion fatigue beahaviour of wire ropes in offshore moorings," Ocean Eng., vol. 36, no. 9/10, pp. 650-660, Jul. 2009.
40. C. R. Chaplin, "Torsional failure of a wire rope mooring line during installation in deep water," Eng. Failure Anal., vol. 6, no. 2, pp. 67-82, Apr. 1999. (Pubitemid 29355347)
41. C. R. Chaplin, G. Rebel, and I. Ridge, Tension-Torsion Fatigue Effects in Wire Ropes, OIPEEC Bulletin 77, Reading, U.K., 1999, 7 pages. [Online]. Available: http://www.bgisl.com/RRR-OE-Twist-article- OIPEEC-1999.pdf
42. R. Verreet and I. Ridge, Wire Rope Forensics. [Online]. Available: http://www.casar.de/portals/casar/story-docs/Broschueren/wire-rope- forensics-a4.pdf
43. R. Verreet, Steel Wire Ropes for Cranes Problems and Solutions. [Online]. Available: http://www.casar.de/portals/casar/story-docs/ Broschueren/casar- steel-wire-ropes.pdf
44. Health and Safety Commission, Guidance on the Selection, Installation, Maintenance and Use of Steel Wire Ropes in Vertical Mine Shafts, Deep Mined Coal Industry Advisory Committee, 2004, 139 pp. [Online]. Available: http://www.hse.gov.uk/pubns/micvertical.pdf
45. R. Verreet, The Rotational Characteristics of Steel Wire Ropes. [Online]. Available: http://www.casar.de/portals/casar/story-docs/Broschueren/ casar-rotation