Frequency response analysis for rolling-bearing damage diagnosis

IEEE Transactions on Industrial Electronics

Volumn 55, Issue 12, 2008, Pages 4270-4276

  Zoubek, Henning ^a   Villwock, Sebastian ^b   Pacas, Mario ^a  

^a UNIVERSITY OF SIEGEN   (Germany)

^b Baumuller Nürnberg GmbH   (Germany)

Author keywords

Bearings; Condition monitoring; Electrical drives; Fault diagnosis; Frequency response

Indexed keywords

BEARINGS (MACHINE PARTS); BEARINGS (STRUCTURAL); CONDITION MONITORING; DRIVES; FAILURE ANALYSIS; PAPER; QUALITY ASSURANCE; RELIABILITY; RESONANCE;

BEARING DAMAGES; BEARING DEFECTS; BEARING FAULTS; BEARINGS; CHANNEL ANALYSES; CONTROL VARIABLES; DIAGNOSIS METHODS; ELECTRICAL DRIVES; FAULT DIAGNOSIS; FREQUENCY RESPONSE ANALYSES; MASS SYSTEMS; MECHANICAL RESONANCES; NORMAL OPERATIONS; ROLLING BEARINGS;

FREQUENCY RESPONSE;

EID: 57749191005     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2008.2005020     Document Type: Article

References (33)

1. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors - A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005.
2. W. Zhou, T. G. Habetler, and R. G. Harley, "Bearing condition monitoring methods for electric machines: A general review," in Proc. IEEE SDEMPED Conf., Cracow, Poland, 2007, pp. 3-6.
3. T. A. Harris and M. N. Kotzalas, Rolling Bearing Analysis - Essential Concepts of Bearing Technology, 5th ed. Boca Raton, FL: CRC Press, 2007.
4. T. A. Harris and M. N. Kotzalas, Rolling Bearing Analysis - Advanced Concepts of Bearing Technology, 5th ed. Boca Raton, FL: CRC Press, 2007.
5. J. R. Stack, T. G. Habetler, and R. G. Harley, "Effects of machine speed on the development and detection of rolling element bearing faults," IEEE Power Electron Lett., vol. 1, no. 1, pp. 19-21, Mar. 2003.
6. R. R. Obaid, T. G. Habetler, and J. R. Stack, "Stator current analysis for bearing damage detection in induction motors," in Proc. IEEE SDEMPED Conf., Atlanta, GA, 2003, pp. 182-187.
7. A. M. Knight and S. P. Bertani, "Mechanical fault detection in a medium-sized induction motor using stator current monitoring," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 753-760, Dec. 2005.
8. Mechanical Vibration - Evaluation of Machine Vibration by Measurement on Non-Rotating Parts - Part 3, ISO 10816-3, 1998.
9. B. Li, M.-Y. Chow, Y. Tipsuwan, and J. C. Hung, "Neural-network-based motor rolling bearing fault diagnosis," IEEE Trans. Ind. Electron. vol. 47, no. 5, pp. 1060-1069, Oct. 2000.
10. N. Gebraeel, M. Lawley, R. Liu, and V. Parmeshwaran, "Residual life predictions from vibration-based degradation signals: A neural network approach," IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 694-700, Jun. 2004.
11. J. R. Stack, T. G. Habetler, and R. G. Harley, "Fault-signature modeling and detection of inner-race bearing faults," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 61-68, Jan./Feb. 2006.
12. J. R. Stack, R. G. Harley, and T. G. Habetler, "An amplitude modulation detector for fault diagnosis in rolling element bearings," IEEE Trans. Ind. Electron., vol. 51, no. 5, pp. 1097-1102, Oct. 2004.
13. R. Rubini and U. Meneghetti, "Application of the envelope and wavelet transform analyses for the diagnosis of incipient faults in ball bearings," Mech. Syst. Signal Process., vol. 15, no. 2, pp. 287-302, Mar. 2001.
14. T. Lindh, "On the condition monitoring of induction machines," Ph.D. dissertation, Lappeenranta Univ. Technol., Lappeenranta, Finland, 2003.
15. J. R. Stack, T. G. Habetler, and R. G. Harley, "Bearing fault detection via autoregressive stator current modeling," IEEE Trans. Ind. Appl. vol. 40, no. 3, pp. 740-747, May/Jun. 2004.
16. J.-H. Jung, J.-J. Lee, and B.-H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
17. B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, "Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 610-619, Feb. 2008.
18. R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
19. M. S. Ballal, Z. J. Khan, H. M. Suryawanshi, and R. L. Sonolikar, "Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 250-258, Feb. 2007.
20. B. Yazici and G. B. Kliman, "An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current," IEEE Trans. Ind. Appl., vol. 35, no. 2, pp. 442-452, Mar./Apr. 1999.
21. L. Eren and M. J. Devaney, "Bearing damage detection via wavelet packet decomposition of the stator current," IEEE Trans. Instrum. Meas., vol. 53, no. 2, pp. 431-436, Apr. 2004.
22. J. L. Silva and A. J. M. Cardoso, "Bearing failures diagnosis in three-phase induction motors by extended Park's vector approach," in Proc. IEEE IECON Conf., Raleigh, NC, 2005, pp. 2591-2596.
23. A. Ibrahim, M. El Badaoui, F. Guillet, and W. Youssef, "Electrical signals analysis of an asynchronous motor for bearing fault detection," in Proc. IEEE IECON, Paris, France, 2006, pp. 4975-4980.
24. W. Zhou, T. G. Habetler, R. G. Harley, and B. Lu, "Incipient bearing fault detection via stator current noise cancellation using Wiener filter," in Proc. IEEE SDEMPED Conf., Cracow, Poland, 2007, pp. 11-16.
25. S. Villwock, H. Zoubek, and J. M. Pacas, "Rolling bearing condition monitoring based on frequency response analysis," in Proc. IEEE SDEMPED Conf., Cracow, Poland, 2007, pp. 29-35.
26. J. R. Stack, T. G. Habetler, and R. G. Harley, "Fault classification and fault signature production for rolling element bearings in electric machines," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 735-739, May/Jun. 2005.
27. M. El Hachemi Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, Oct. 2000.
28. S. Villwock, Identifikationsmethoden für die automatisierte Inbetriebnahme und Zustandsüberwachung elektrische Antriebe," Ph.D. dissertation, Univ. Siegen, Siegen, Germany, 2007.
29. S. Villwock and J. M. Pacas, "Application of the Welch-Method for the identification of two- and three-mass-systems," IEEE Trans. Ind. Electron., vol. 55, no. 1, pp. 457-466, Jan. 2008.
30. K. D. Kammeyer and K. Kroschel, Digitale Signalverarbeitung. Stuttgart, Germany: B. G. Teubner, 2002.
31. M. Arkan, H. Callis, and M. E. Tagluk, "Bearing and misalignment fault detection in induction motors by using the space vector angular fluctuation signal," Elect. Eng., vol. 87, no. 4, pp. 197-206, Jun. 2005.
32. M. Blödt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1813-1822, Apr. 2008.
33. S. Villwock and J. M. Pacas, "Detection of rolling bearing faults by frequency response analysis," in Proc. PCIM-Conf., Nuernberg, Germany, 2007.