Recent developments in plastic forming technology of titanium alloys

Science China Technological Sciences

Volumn 54, Issue 2, 2011, Pages 490-501

  Yang, He ^a   Fan, Xiao Guang ^a   Sun, Zhi Chao ^a   Guo, Liang Gang ^a   Zhan, Mei ^a  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Large scale integral complex components; Microstructure control; Multi scale simulation; Precision forming; Titanium alloys

Indexed keywords

AUTOMOTIVE INDUSTRY; INDUSTRIAL RESEARCH; MICROSTRUCTURE; PLASTIC PRODUCTS; PLASTICS INDUSTRY;

COMPLEX COMPONENTS; COMPREHENSIVE PROPERTIES; DEVELOPMENT TENDENCY; FORMING TECHNIQUES; MICROSTRUCTURE CONTROL; MULTI-SCALE SIMULATION; PRECISION FORMING; RESEARCH AND DEVELOPMENT;

TITANIUM ALLOYS;

EID: 79953905111     PISSN: 16747321     EISSN: 18691900     Source Type: Journal    
DOI: 10.1007/s11431-010-4206-y     Document Type: Article

References (155)

1. Leyens C, Peters M. Titanium and Titanium alloys. Weinheim: Wiley-VCH, 2003
2. Chen F, Chiu K. Stamping formability of pure titanium sheets. J Mater Process Technol, 2005, 170: 181-186 (Pubitemid 41526166)
3. Jiang Z Q, Yang H, Zhan M, et al. Establishment of a 3D FE model for the bending of a titanium alloy tube. Int J Mech Sci, 2010, 52(9): 1115-1124
4. Jiang Z Q, Yang H, Zhan M, et al. Coupling effects of material properties and the bending angle on the springback angle of a titanium alloy tube during numerically controlled bending. Mater Design, 2010, 31(4): 2001-2010
5. Toussaint F, Tabourot L, Ducher F. Experimental and numerical analysis of the forming process of a CP titanium scoliotic instrumentation. J Mater Process Technol, 2008, 197(1-3): 10-16 (Pubitemid 350258615)
6. Adamus J, Lacki P. Forming of the titanium elements by bending. Comput Mater Sci, 2010, doi:10.1016/j.commatsci.2010.03.011
7. Zhang L, Lu Q, Han Z, et al. Shape distortion of TC1M titanium alloy sheet during drawing process (in Chinese). Acta Metall Sin, 2007, 43(8): 875-878 (Pubitemid 47407078)
8. Torng C, Huang C, Chang H M. Springback analysis of Ti-6Al-4V in hydro-forming process for aerospace sheet metal parts. Steel Res Int, 2008, (special issue 1): 288-292
9. Ou H, Lana J, Armstrong C, et al. An FE simulation and optimisation approach for the forging of aeroengine components. J Mater Process Technol, 2004, 151(1-3): 208-216
10. Gao T, Yang H, Liu Y. Backward tracing simulation of precision forging process for blade based on 3D FEM. Trans Nonferrous Met Soc China, 2006, 16(2): 639-644
11. Gao T, Yang H, Liu Y. Influence of dynamic boundary conditions on preform design for deformation uniformity in backward simulation. J Mater Process Technol, 2008, 197(1-3): 255-260 (Pubitemid 350251154)
12. Ou H, Armstrong C. Evaluating the effect of press and die elasticity in forging of aerofoil sections using finite element simulation. Finite Elem Anal Des, 2006, 42(10): 856-867
13. Ou H, Armstrong C, Price M. Die shape optimisation in forging of aerofoil sections. J Mater Process Technol, 2003, 132(1-3): 21-27 (Pubitemid 35437478)
14. Ou H, Armstrong C. Die shape compensation in hot forging of titanium aerofoil sections. J Mater Process Technol, 2002, 125-126:347-352 (Pubitemid 34991957)
15. Poorganji B, Yamaguchi M, Itsumi Y, et al. Microstructure evolution during deformation of a near-α titanium alloy with different initial structures in the two-phase region. Scripta Mater, 2009, 61(4): 419-422
16. Niu Y, Hou H, Li M, et al. High temperature deformation behavior of a near alpha Ti600 titanium alloy. Mater Sci Eng A, 2008, 492(1-2): 24-28
17. Li A B, Huang L J, Meng Q Y, et al. Hot working of Ti-6Al-3Mo-2Zr-0.3Si alloy with lamellar α+β starting structure using processing map. Mater Design, 2009, 30(5): 1625-1631
18. Huang L J, Geng L, Li A B, et al. Characteristics of hot compression behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy with an equiaxed microstructure. Mater Sci Eng A, 2009, 505(1-2): 136-143
19. Huang L J, Geng L, Li A B, et al. Effects of hot compression and heat treatment on the microstructure and tensile property of Ti-6.5Al-3.5Mo-1.5Zr-0. 3Si alloy. Mater Sci Eng A, 2008, 489(1-2): 330-336 (Pubitemid 351804157)
20. Ma F, Lu W, Qin J, et al. Microstructure evolution of near-α titanium alloys during thermomechanical processing. Mater Sci Eng A, 2006, 416(1-2): 59-65 (Pubitemid 43103152)
21. Duan Y P, Li P, Xue K M, et al. Flow behavior and microstructure evolution of TB8 alloy during hot deformation process. Trans Nonferrous Met Soc China, 2007, 17(6): 1199-1204
22. Zong Y Y, Shan D B, Xu M, et al. Flow softening and microstructural evolution of TC11 titanium alloy during hot deformation. J Mater Process Technol, 2009, 209(4): 1988-1994
23. Wanjara P, Jahazi M, Monajati H, et al. Influence of thermomechanical processing on microstructural evolution in near-α alloy IMI834. Mater Sci Eng A, 2006, 416(1-2): 300-311 (Pubitemid 43108751)
24. Wang K, Lu S, Fu M W, et al. Optimization of β/near-β forging process parameters of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si by using processing maps. Mater Character, 2009, 60(6): 492-498
25. Luo J, Li M, Yu W, et al. Effect of the strain on processing maps of titanium alloys in isothermal compression. Mater Sci Eng A, 2009, 504(1-2): 90-98
26. Jones N, Dashwood R, Dye D, et al. Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr. Mater Sci Eng A, 2008, 490(1-2): 369-377
27. Zong Y Y, Shan D B, Lu Y. Microstructural evolution of a Ti-4.5Al-3Mo-1V alloy during hot working. J Mater Sci, 2006, 41(12): 3753-3760 (Pubitemid 44075736)
28. Vo P, Jahazi M, Yue S. Recrystallization during thermomechanical processing of IMI834. Metall Mater Trans A, 2008, 39(12): 2965-980
29. Song H, Zhang S, Cheng M. Dynamic globularization kinetics during hot working of a two phase titanium alloy with a colony alpha microstructure. J Alloy Compd, 2009, 480(2): 922-927
30. Wang K, Zeng W, Zhao Y, et al. Dynamic globularization kinetics during hot working of Ti-17 alloy with initial lamellar microstructure. Mater Sci Eng A, 2010, 527(10-11): 2559-2566
31. Li X, Li M. A set of microstructure-based constitutive equations in hot forming of a titanium alloy. J Univ Sci Technol B, 2006, 13(5): 435-441 (Pubitemid 44692128)
32. Luo J, Li M, Li X, et al. Constitutive model for high temperature deformation of titanium alloys using internal state variables. Mech Mater, 2010, 42(2): 157-165
33. Semiatin S L, Lehner T M, Miller J D, et al. Alpha/beta heat treatment of a titanium alloy with a nonuniform microstructure. Metall Mater Trans A, 2007, 38(4): 910-921 (Pubitemid 47023315)
34. Miller J D, Semiatin S L. Effect of the size distribution of alpha particles on microstructure evolution during heat treatment of an alpha/beta titanium alloy. Metall Mater Trans A, 2005, 36(1): 259-262 (Pubitemid 40264686)
35. Sun Z, Yang H, Han G, et al. A numerical model based on internal-state-variable method for the microstructure evolution during hot-working process of TA15 titanium alloy. Mater Sci Eng A, 2010, 527(15): 3464-3471
36. Bache M R, Evans W J. Impact of texture on mechanical properties in an advanced titanium alloy. Mater Sci Eng A, 2001, 319-321: 409-414 (Pubitemid 34122512)
37. Bache M R, Evans W J, Suddell B, et al. The effects of texture in titanium alloys for engineering components under fatigue. Int J Fatigue, 2001, 23: S153-S159 (Pubitemid 33142373)
38. Whittaker M T, Evans W J, Lancaster R, et al. The effect of microstructure and texture on mechanical properties of Ti6-4. Int J Fatigue, 2009, 31(11-12): 2022-2030
39. Evans W J, Jones J P, Whittaker M T. Texture effects under tension and torsion loading conditions in titanium alloys. Int J Fatigue, 2005, 27(10-12): 1244-1250 (Pubitemid 41497957)
40. Hoseini M, Shahryari A, Omanovic S, Szpunar J A. Comparative effect of grain size and texture on the corrosion behaviour of commercially pure titanium processed by equal channel angular pressing. Corros Sci, 2009, 51(12): 3064-3067
41. Martin E', Azzi M, Salishchev G A, et al. Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti-6Al-4V. Tribol Int, 2010, 43(5-6): 918-924
42. Bridier F, Villechaise P, Mendez J. Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales. Acta Mater, 2008, 56(15): 3951-3962
43. Bantounas I, Lindley T, Rugg D, et al. Effect of microtexture on fatigue cracking in Ti-6Al-4V. Acta Mater, 2007, 55(16): 5655-5665 (Pubitemid 47302388)
44. Germain L, Gey N, Humbert M, et al. Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet. Acta Mater, 2005, 53(13): 3535-3543 (Pubitemid 40822919)
45. Germain L, Gey N, Humbert M, et al. Texture heterogeneities induced by subtransus processing of near α titanium alloys. Acta Mater, 2008, 56(16): 4298-4308
46. Zeng Z, Zhang Y, Jonsson S. Microstructure and texture evolution of commercial pure titanium deformed at elevated temperatures. Mater Sci Eng A, 2009, 513-514: 83-90
47. Raghunathan S L, Dashwood R J, Jackson M, et al. The evolution of microtexture and macrotexture during subtransus forging of Ti-10V-2Fe-3Al. Mater Sci Eng A, 2008, 488(1-2): 8-15 (Pubitemid 351712650)
48. Sander B, Raabe D. Texture inhomogeneity in a Ti-Nb-based β-titanium alloy after warm rolling and recrystallization. Mater Sci Eng A, 2008, 479(1-2): 236-247 (Pubitemid 351384303)
49. Wagner F, Bozzolo N, Landuyt O, et al. Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets. Acta Mater, 2002, 50(5): 1245-1259 (Pubitemid 34187505)
50. Bozzolo N, Dewobroto N, Grosdidier T, et al. Texture evolution during grain growth in recrystallized commercially pure titanium. Mater Sci Eng A, 2005, 397(1-2): 346-355 (Pubitemid 40578416)
51. Bozzolo N, Dewobroto N, Wenk H R, et al. Microstructure and microtexture of highly cold-rolled commercially pure titanium. J Mater Sci, 2007, 42(7): 2405-2416 (Pubitemid 46479886)
52. Chun Y B, Yu S H, Semiatin S L, et al. Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium. Mater Sci Eng A, 2005, 398(1-2): 209-219 (Pubitemid 40697021)
53. Zhong Y, Yin F X, Nayai K. Role of deformation twin on texture evolution in cold-rolled commercial-purity Ti. J Mater Res, 2008, 23(11): 2954-2966
54. Gurao N, A A A, Suwas S. Study of texture evolution in metastable β-Ti alloy as a function of strain path and its effect on α transformation texture. Mater Sci Eng A, 2009, 504(1-2): 24-35
55. Salem A A, Glavicic M G, Semiatin S L. The effect of preheat temperature and inter-pass reheating on microstructure and texture evolution during hot rolling of Ti-6Al-4V. Mater Sci Eng A, 2008, 496(1-2): 169-176
56. Huang X, Suzuki K, Chino Y. Improvement of stretch formability of pure titanium sheet by differential speed rolling. Scripta Mater, 2010, 63(5): 473-476
57. Zhu Y T, Langdon T G. The fundamentals of nanostructured materials processed by severe plastic deformation. JOM, 2004, 56(10): 58-63
58. Semiatin S L, DeLo D P. Equal channel angular extrusion of difficult-to-work alloys. Mater Design, 2000, 21(4): 311-322 (Pubitemid 30233987)
59. Delo D P, Semiatin S L. Hot working of Ti-6Al-4V via equal channel angular extrusion. Metall Mater Trans A, 1999, 30(9): 2473-2481 (Pubitemid 32077747)
60. Edalati K, Matsubara E, Horita Z. Processing pure Ti by high-pressure torsion in wide ranges of pressures and strain. Metall Mater Trans A, 2009, 40(9): 2079-2086
61. Xu W, Wu X L, Figueiredo R B, et al. Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion. Int J Mater Res, 2009, 100(12): 1662-1667
62. Islamgaliev R K, Kazyhanov V U, Shestakova L O, et al. Microstructure and mechanical properties of titanium (Grade 4) processed by high-pressure torsion. Mater Sci Eng A, 2008, 493(1-2): 190-194
63. Pachla W, Kulczyk M, Sus-Ryszkowska M, et al. Nanocrystalline titanium produced by hydrostatic extrusion. J Mater Process Technol, 2008, 205(1-3): 173-182
64. Kurzydlowski K J, Lewandowska M. Fabrication of nanostructured materials by hydrostatic extrusion: advantages and limitations. Mater Sci Forum, 2007, 561-565: 913-916
65. Raducanu D, Cojocaru V D, Cinca I, et al. Materials development on the nanoscale by accumulative roll bonding procedure. J Optoelectron Adv Mater, 2007, 9(11): 3346-3349
66. Terada D, Inoue S, Tsuji N. Microstructure and mechanical properties of commercial purity titanium severely deformed by ARB process. J Mater Sci, 2007, 42(5): 1673-1681 (Pubitemid 46354506)
67. Salishchev G A, Galeyev R M, Malysheva S P, et al. Structure and density of submicrocrystalline titanium produced by severe plastic deformation. Nanostruct Mater, 1999, 11(3): 407-414
68. Valiev R Z, Langdon T G. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci, 2006, 51(7): 881-981 (Pubitemid 44192442)
69. Semiatin S L, Delo D P, Shell E B. The effect of material properties and tooling design on deformation and fracture during equal channel angular extrusion. Acta Mater, 2000, 48(8): 1841-1851
70. Son I, Lee J H, Im Y T. Finite element investigation of equal channel angular extrusion with back pressure. J Mater Process Technol, 2006, 171(3): 480-487 (Pubitemid 43106629)
71. Zhang Z J, Son I H, Im Y T, et al. Finite element analysis of plastic deformation of CP-Ti by multi-pass equal channel angular extrusion at medium hot-working temperature. Mater Sci Eng A, 2007, 447(1-2): 134-141 (Pubitemid 46075947)
72. Lee J H. Design guideline of multi-pass equal channel angular extrusion for uniform strain distribution. J Mater Process Technol, 2007, 191(1-3): 39-43
73. Chen Y J, Li Y J, Walmsley J C, et al. Microstructure evolution of commercial pure titanium during equal channel angular pressing. Mater Sci Eng A, 2010, 527(3): 789-796
74. Chen Y J, Li Y J, Walmsley J C, et al. Deformation structures of pure titanium during shear deformation. Metall Mater Trans A, 2010, 41(4): 787-794
75. Semenova I P, Raab G I, Saitova L R, et al. The effect of equal channel angular pressing on the structure and mechanical behavior of Ti6Al4V alloy. Mater Sci Eng A, 2004, 387-389: 805-808 (Pubitemid 39644845)
76. Raab G I, Soshnikova E P, Valiev R E. Influence of temperature and hydrostatic pressure during equal channel angular pressing on the microstructure of commercial purity Ti. Mater Sci Eng A, 2004, 387-389: 674-677 (Pubitemid 39644831)
77. Kim I, Kim J, Shin D H, et al. Effects of equal channel angular pressing temperature on deformation structures of pure Ti. Mater Sci Eng A, 2003, 342(1-2): 302-310 (Pubitemid 35437012)
78. Purcek G, Saray O, Kul O, et al. Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion. Mater Sci Eng A, 2009, 517(1-2): 97-104
79. Shin D H, Kim I, Kim J, et al. Microstructure development during equal-channel angular pressing of titanium. Acta Mater, 2003, 51(4): 983-996
80. Stolyarov V V, Zeipper L, Mingler B, et al. Influence of post- deformation on CP-Ti processed by equal channel angular pressing. Mater Sci Eng A, 2008, 476 (1-2): 98-105 (Pubitemid 351187513)
81. Semenova I P, Valiev R Z, Yakushina E B, et al. Strength and fatigue properties enhancement in ultrafine-grained Ti produced by severe plastic deformation. J Mater Sci, 2008, 43(23-24): 7354-7359
82. Hou H L, Li Z Q, Wang Y J, et al. Technology of hydrogen treatment for titanium alloy and its application prospect (in Chinese). Chinese J Nonferr Metal, 2003, 13(3): 533-549
83. Froes F H, Senkov O N, Qazi J I. Hydrogen as a temporary alloying element in titanium alloys: thermohydrogen processing. Int Mater Rev, 2004, 49(3-4): 227-245
84. Niu Y, Li M. Application of thermohydrogen processing for formation of ultrafine equiaxed grains in near α Ti600 alloy. Metall Mater Trans A, 2009, 40(12): 3009-3015
85. Niu Y, Li M. Effect of 0.16 wt% hydrogen addition on high temperature deformation behavior of the Ti600 titanium alloy. Mater Sci Eng A, 2009, 513-514: 228-232
86. Zhao J W, Ding H, Hou H L, et al. Influence of hydrogen content on hot deformation behavior and microstructural evolution of Ti600 alloy. J Alloy Compd, 2010, 491(1-2): 673-678
87. Zhao J, Ding H, Wang Y, et al. Influence of thermo hydrogen treatment on hot deformation behavior of Ti600 alloy. Trans Nonferrous Met Soc China, 2009, 19(1): 65-71
88. Zong Y Y, Shan D B, Lv Y, et al. Effect of 0.3 wt%H addition on the high temperature deformation behaviors of Ti-6Al-4V alloy. Int J Hydrogen Energ, 2007, 32(16): 3936-3940 (Pubitemid 350016591)
89. Shan D B, Zong Y Y, Lv Y, et al. The effect of hydrogen on the strengthening and softening of Ti-6Al-4V alloy. Scripta Mater, 2008, 58(6): 449-452
90. Li M Q, Zhang W F. Effect of hydrogen on processing maps in isothermal compression of Ti-6Al-4V titanium alloy. Mater Sci Eng A, 2009, 502(1-2): 32-37
91. Li M, Zhang W. Effect of hydrogenation content on high temperature deformation behavior of Ti-6Al-4V alloy in isothermal compression. Int J Hydrogen Energ, 2008, 33(11): 2714-2720
92. Lu J, Qin J, Lu W, et al. Effect of hydrogen on superplastic deformation of (TiB+TiC)/Ti-6Al-4V composite. Int J Hydrogen Energ, 2009, 34(19): 8308-8314
93. Lu J, Qin J, Lu W, et al. Hot deformation behavior and microstructure evaluation of hydrogenated Ti-6Al-4V matrix composite. Int J Hydrogen Energ, 2009, 34(22): 9266-9273
94. He W J, Zhang S H, Song H W, et al. Hydrogen-induced hardening and softening of a β-titanium alloy. Scripta Mater, 2009, 61(1): 16-19
95. Grong O, Shercliff H R. Microstructural modelling in metals processing. Prog Mater Sci, 2002, 47(2): 163-282
96. Tang Z, Yang H, Sun Z, et al. Microstructure evolution and numerical simulation of TA15 titanium alloy during hot compressive deformation (in Chinese). Chinese J Nonferr Metal, 2008, 18(4): 722-727 (Pubitemid 351765521)
97. Luo J, Li M Q, Hu Y Q, et al. Modeling of constitutive relationships and microstructural variables of Ti-6.62Al-5.14Sn-1.82Zr alloy during high temperature deformation. Mater Charact, 2008, 59(10): 1386-1394
98. Ding R, Guo Z X. Microstructural evolution of a Ti-6Al-4V alloy during β-phase processing: experimental and simulative investigations. Mater Sci Eng A, 2004, 365(1-2): 172-179 (Pubitemid 38005826)
99. Chun Y B, Semiatin S L, Hwang S K. Monte Carlo modeling of microstructure evolution during the static recrystallization of cold-rolled, commercial-purity titanium. Acta Mater, 2006, 54(14): 3673-3689 (Pubitemid 44173059)
100. Roters F, Eisenlohr P, Hantcherli L, et al. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications. Acta Mater, 2010, 58(4): 1152-1211
101. Salem A, Kalidindi S, Semiatin S. Strain hardening due to deformation twinning in α-titanium: constitutive relations and crystal-plasticity modeling. Acta Mater, 2005, 53(12): 3495-3502 (Pubitemid 40761052)
102. Wu X, Kalidindi S, Necker C, et al. Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity α-titanium using a Taylor-type crystal plasticity model. Acta Mater, 2007, 55(2): 423-432 (Pubitemid 44909597)
103. Wu X, Kalidindi S, Necker C, et al. Modeling anisotropic stressstrain response and crystallographic texture evolution in α-titanium during large plastic deformation using Taylor-type models: influence of initial texture and purity. Metall Mater Trans A, 2008, 39(12): 3046-3054
104. Fromm B, Adams B, Ahmadi S, et al. Grain size and orientation distributions: application to yielding of α-titanium. Acta Mater, 2009, 57(8): 2339-2348
105. Venkatramani G, Ghosh S, Mills M. A size-dependent crystal plasticity finite-element model for creep and load shedding in polycrystalline titanium alloys. Acta Mater, 2007, 55(11): 3971-3986 (Pubitemid 46755698)
106. Venkataramani G, Kirane K, Ghosh S. Microstructural parameters affecting creep induced load shedding in Ti-6242 by a size dependent crystal plasticity FE model. Int J Plast, 2008, 24(3): 428-454 (Pubitemid 350251671)
107. Kirane K, Ghosh S, Groeber M, et al. Grain level dwell fatigue crack nucleation model for Ti alloys using crystal plasticity finite element analysis. J Eng Mater Technol, 2009, 131(2): 021003-1-14
108. Mayeur J, McDowell D. A three-dimensional crystal plasticity model for duplex Ti-6Al-4V. Int J Plast, 2007, 23(9): 1457-1485 (Pubitemid 46777248)
109. Zhang M, Zhang J, McDowell D. Microstructure based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V. Int J Plast, 2007, 23(8): 1328-1348 (Pubitemid 46660457)
110. Zhang M, Bridier F, Villechaise P, et al. Simulation of slip band evolution in duplex Ti-6Al-4V. Acta Mater, 2010, 58(3): 1087-1096
111. Bridier F, McDowell D, Villechaise P, et al. Crystal plasticity modeling of slip activity in Ti-6Al-4V under high cycle fatigue loading. Int J Plast, 2009, 25(6): 1066-1082
112. Yang H, Sun Z, Zhan M, et al. Advances in control of unequal deformation by locally loading and theories related to precision plastic forming (in Chinese). J Plast Eng, 2008, 15(2): 6-14
113. Zhang D W, Yang H, Sun Z C. Analysis of local loading forming for titanium-alloy T-shaped components using slab method. J Mater Process Technol, 2010, 210(2): 258-266
114. Sun Z, Yang H. Mechanism of unequal deformation during large-scale complex integral component isothermal local loading forming. Steel Res Int, 2008, (special issue 1): 601-608
115. Sun Z, Yang H. Analysis on process and forming defects of largescale complex integral component isothermal local loading. Mater Sci Forum, 2009, 614: 117-122
116. Sun Z, Yang H. Forming quality of titanium alloy large-scale integral components isothermal local loading. Arab J Sci Eng, 2009, 34(1): C 35-45
117. Sun N, Yang H, Sun Z. Optimization on the process of large titanium bulkhead isothermal closed die forging (in Chinese). Rare Metal Mater Eng, 2009, 38(7): 1296-1300
118. Sun Z, Yang H. Microstructure and mechanical properties of TA15 titanium alloy under multi-step local loading forming. Mater Sci Eng A, 2009, 523(1-2): 184-92
119. Li Z, Yang H, Sun Z. Research on macro-microcosmic deforming in isothermal local loading transition region for large-scale complex integral components of TA15 titanium alloy (in Chinese). Rare Metal Mater Eng, 2008, 37(9): 1516-1521
120. Han G, Yang H, Sun Z, et al. Numerical simulation of microstructure evolution of TA1 5 alloy large-scale rib-web parts during isothermal local loading process (in Chinese). J Plast Eng, 2009, 16(5): 112-117
121. Peng F, Yang H, Sun Z, et al. Simulation on billet preforming process of large scale complex part of titanium alloy (in Chinese). J Plast Eng, 2008, 15(5): 47-52
122. Fan X G, Yang H, Sun Z C, et al. Effect of deformation inhomogeneity on the microstructure and mechanical properties of large-scale rib-web component of titanium alloy under local loading forming. Mater Sci Eng A, 2010, 527(21-22): 5391-5399
123. Yeom J T, Kim J H, Park N K, et al. Ring-rolling design for a large-scale ring product of Ti-6Al-4V alloy. J Mater Process Technol, 2007, 187-188: 747-751 (Pubitemid 46412745)
124. Wang Z W, Zeng S Q, Yang X H. The key technology and realization of virtual ring rolling. J Mater Process Technol, 2007, 182(1-3): 374-381 (Pubitemid 44693313)
125. Yang H, Wang M, Guo L G, et al. 3D coupled thermo-mechanical FE modeling of blank size effects on the uniformity of strain and temperature distributions during hot rolling of titanium alloy large ring. Comp Mater Sci, 2008, 44(2): 611-621
126. Wang M, Yang H, Sun Z C, et al. Analysis of mechanical and thermal behaviors in hot rolling of large rings of titanium alloy using 3D dynamic explicit FEM. J Mater Process Technol, 2009, 209(7): 3384-3395
127. Wang M, Yang H, Sun Z C, et al. Effects and optimization of roll sizes in hot rolling of large rings of titanium alloy. Rare Metal Mater Eng, 2009, 38 (3): 393-397
128. Wang M, Yang H, Sun Z C, et al. Dynamic explicit FE modeling of hot ring rolling process. Trans Nonferrous Met Soc China, 2006, 6(6): 1274-1280
129. Wang M, Yang H, Guo L G, et al. Numerical study on motions of rolls in hot rolling of large rings. In: Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Tianjin, China, 2008
130. Wang M, Yang H, Guo L G, et al. Simulation of microstructure evolution during hot rolling of large rings of titanium alloy based on 3D-FEM (in Chinese). J Plast Eng, 2008, 15(6): 76-80
131. Li H, Zhan M, Yang H, et al. Coupled thermal-mechanical FEM analysis of power spinning of titanium alloy thin-walled shell (in Chinese). Chinese J Mech Eng, 2008, 44(6): 187-193
132. Lv H J, Yu W Y, Wang Q, et al. FEM numerical simulation of spinning processing for TC4 alloy (in Chinese). J Tianjin Polytechnic Univ, 2007, 26(6): 59-65
133. Li Q J, Lv H J, Wang Q, et al. FEM numerical simulation of spinning processing for thin TC4 alloy workpiece with curvilinear shape (in Chinese). J Tianjin Polytechnic Univ, 2008, 27(2): 61-65
134. Chen Y, Kang D C. FEM coupled thermal simulation of warm power spinning of cylindrical workpiece of titanium alloy (in Chinese). J Harbin Inst Technol, 2006, 38(1): 191-193 (Pubitemid 43743152)
135. Yang G P, Xu W C, Chen Y, et al. Research on material flow rule of backward tube spinning process (in Chinese). J Plast Eng, 2008, 15(6): 48-52
136. Shan D, Yang G, Xu W. Deformation history and the resultant microstructure and texture in backward tube spinning of Ti-6Al-2Zr-1Mo-1V. J Mater Process Technol, 2009, 209(17): 5713-5719
137. Yang G P, Xu W C, Chen Y, et al. Tube-spinning microstructure and preferential orientation of BT20 alloy (in Chinese). Mater Sci Technol, 2009, 17(4): 467-473
138. Xu W, Shan D, Wang Z, et al. Effect of spinning deformation on microstructure evolution and mechanical property of TA15 titanium alloy. Trans Nonferrous Met Soc China, 2007, 17(6): 1205-1211
139. Chumachenko E N, Portnoi V, Paris L, et al. Analysis of the SPF of a titanium alloy at lower temperatures. J Mater Process Technol, 2005, 170(1-2): 448-456 (Pubitemid 41528717)
140. Wang J N, Wang Y. An investigation of the origin of the superplasticity of cast TiAl alloys. Int J Plast, 2006, 22(8): 1530-1548
141. Hefti L. Advances in fabricating superplastically formed and diffusion bonded components for aerospace structures. J Mater Eng Perform, 2004, 13(6): 678-682 (Pubitemid 40056318)
142. Hefti L. Innovations in the superplastic forming and diffusion bonded process. J Mater Eng Perform, 2008, 17(2): 178-182
143. Sanders D G, Ramulu M. Examination of superplastic forming combined with diffusion bonding for titanium: perspective from experience. J Mater Eng Perform, 2004, 13(6): 744-752 (Pubitemid 40056321)
144. Xun Y W, Tan M J. Applications of superplastic forming and diffusion bonding to hollow engine blades. J Mater Process Technol, 2000, 99(1-3): 80-85 (Pubitemid 30557712)
145. Zhao Z, Guo H, Chen L, et al. Superplastic behaviour and microstructure evolution of a fine-grained TA15 titanium alloy. Rare Metals, 2009, 28(5): 523-527
146. Wang G C, Fu M W, Cao C X, et al. Study on the maximum m superplasticity deformation of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy. Mater Sci Eng A, 2009, 513-514: 32-41
147. Wang G C, Fu M W. Maximum m superplasticity deformation for Ti-6Al-4V titanium alloy. J Mater Process Technol, 2007, 192-193: 555-560 (Pubitemid 47187974)
148. Salishchev G A, Galeyev R M, Valiakhmetov O R, et al. Development of Ti-6Al-4V sheet with low temperature superplastic properties. J Mater Process Technol, 2001, 116(2-3): 265-268 (Pubitemid 32979111)
149. Comley P. Multi-rate superplastic forming of fine grain Ti-6Al-4V titanium alloy. J Mater Eng Perform, 2007, 16(2): 150-154 (Pubitemid 46675548)
150. Kaibyshev O A, Safiullin R V, Lutfullin R Y, et al. Advanced superplastic forming and diffusion bonding of titanium alloy. Mater Sci Technol, 2006, 22(3): 343-348 (Pubitemid 43948125)
151. Lee H S, Yoon J H, Park C H, et al. A study on diffusion bonding of superplastic Ti-6Al-4V ELI grade. J Mater Process Technol, 2007, 187-188: 526-529 (Pubitemid 46412875)
152. Tan M J, Zhu X J, Thiruvarudchelvan S. Cavitation phenomenon of commercially pure titanium. J Mater Process Technol, 2007, 191: 202-205 (Pubitemid 46873988)
153. Kroehn M A, Leen S B, Hyde T H. A superplastic forming limit diagram concept for Ti-6Al-4V. J Mater Design Appl, 2007, 221(L4) 251-264 (Pubitemid 350211859)
154. Yoon J H, Lee H S, Yi Y M, et al. Prediction of blow forming profile of spherical titanium tank. J Mater Process Technol, 2007, 187-188: 463-466 (Pubitemid 46412818)
155. Chumachenko E N. Development of computer simulation of industrial superplastic sheet forming. Mater Sci Eng A, 2009, 499(1-2): 342-346