Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy

International Journal of Plasticity

Volumn 27, Issue 4, 2011, Pages 522-538

  Khan, Akhtar S ^a   Baig, Muneer ^b  

^a University of Marylandw Baltimore County   (United States)

^b KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

Anisotropy; Constitutive behavior; Forming limit diagrams; Quasi static and dynamic response; Strain rate sensitivity

Indexed keywords

ANISOTROPIC RESPONSE; ANISOTROPY COEFFICIENTS; CONSTITUTIVE BEHAVIOR; CONSTITUTIVE MODELING; EFFECTS OF STRAINS; FINITE DEFORMATIONS; FORMING LIMIT CURVE; FORMING LIMIT DIAGRAMS; MATERIAL PARAMETER; PLANE STRESS CONDITION; PLASTIC ANISOTROPY; QUASI-STATIC; ROLLING DIRECTION; SHEET MATERIAL; STRAIN-RATE SENSITIVITY; TEMPERATURE DEPENDENT; YIELD FUNCTION;

ALUMINUM ALLOYS; ANISOTROPY; CERIUM ALLOYS; DYNAMIC RESPONSE; FORMING; NANOINDENTATION; SHEET METAL; SINGLE CRYSTALS;

STRAIN RATE;

EID: 79952283229     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.08.001     Document Type: Article

References (48)

1. N. Abedrabbo, F. Pourboghrat, and J. Carsley Forming of aluminum alloys at elevated temperatures - Part 1: Material characterization International Journal of Plasticity 22 2006 314 341 (Pubitemid 41377787)
2. N. Abedrabbo, F. Pourboghrat, and J. Carsley Forming of aluminum alloys at elevated temperatures - Part 2: Numerical modeling and experimental verification International Journal of Plasticity 22 2006 342 373 (Pubitemid 41377788)
3. N. Abedrabbo, F. Pourboghrat, and J. Carsley Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models International Journal of Plasticity 23 5 2007 841 875 (Pubitemid 46187316)
4. J.M. Allwood, and D.R. Shoulder Generalised forming limit diagrams showing increased forming limits with non-planar stress states International Journal of Plasticity 25 2009 1207 1230
5. D. Banabic, and K. Siegert Anisotropy and formability of AA5182-O aluminum alloy sheets CIRP Annals - Manufacturing Technology 53 1 2004 219 222
6. F. Barlat, and K. Lian Plastic behavior and stretchability of sheet metals Part I: A yield function for orthotropic sheets under plane stress conditions International Journal of Plasticity 5 1989 51 66
7. F. Barlat, D.J. Lege, and J.C. Brem six-component yield function for anisotropic materials International Journal of Plasticity 7 1991 693 712
8. F. Barlat, Y. Maeda, K. Chung, M. Yanagawa, J.C. Brem, Y. Hayashida, D.J. Lege, K. Matsui, S.J. Murtha, S. Hattori, R.C. Becker, and S. Makosey Yield function development for aluminum alloy sheets Journal of the Mechanics and Physics of Solids 45 11/12 1997 1727 1763 (Pubitemid 127397158)
9. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, and E. Chu Plane stress yield function for aluminum alloy sheets - Part 1: Theory International Journal of Plasticity 19 2003 1297 1319
10. F. Barlat, H. Aretz, Chung, J.W. Yoon, M.E. Karabin, J.C. Brem, and R.E. Dick Linear transformation-based anisotropic yield functions International Journal of Plasticity 21 2005 1009 1039 (Pubitemid 40034583)
11. G.S. Cole, and A.M. Sherman Light weight materials for automotive applications Materials Characterization 35 1 1995 3 9
12. R.W. Davies, G.J. Grant, E.H. Oliver, M.A. Khaleel, and M.T. Smith Forming limit diagrams of aluminum tailor-welded blank weld material Metallurgical and Materials Transactions A 32A 2001 275 283 (Pubitemid 32279234)
13. P. Eyckens, A. Van Bael, and P. Van Houtte Marciniak-Kuczynski type modeling of the effect of through-thickness shear on the forming limits of sheet metal International Journal of Plasticity 25 12 2009 2249 2268
14. A. Graf, and W.F. Hosford Calculations of forming limit diagrams Metallurgical Transactions A 21A 1990 87 94 (Pubitemid 20645807)
15. Goodwin, G.M., 1968. Application of Strain Analysis to Sheet Metal Forming in the Press Shop. SAE Report 680093.
16. R. Hill A theory of the yielding and plastic flow of anisotropic metals Proceedings of the Royal Society of London Series A 193 1948 281 297
17. R. Hill Theoretical plasticity of textured aggregates Mathematical Proceedings of the Cambridge Philosophical Society 85 1979 179 191
18. R. Hill Constitutive modelling of orthotropic plasticity in sheet metals Journal of the Mechanics and Physics of Solids 38 1990 405 417
19. R. Hill A user-friendly theory of orthotropic plasticity in sheet metals International Journal of Mechanical Sciences 35 1993 19 25 (Pubitemid 23612200)
20. W.F. Hosford, and R.M. Caddell Metal Forming: Mechanics and Metallurgy 2007 Cambridge University Press 240 250
21. G.R. Johnson, and W.H. Cook Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures Engineering Fracture Mechanics 21 1 1985 31 48
22. A.S. Khan, and R. Liang Behavior of three BCC metal over a wide range of strain rates and temperatures International Journal of Plasticity 15 1999 1089 1109
23. A.S. Khan, and R. Liang Behavior of three BCC metals during non-proportional multi-axial loadings International Journal of Plasticity 16 2000 1443 1458
24. A.S. Khan, Y.S. Suh, and R. Kazmi Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys International Journal of Plasticity 20 2004 2233 2248
25. A.S. Khan, R. Kazmi, and B. Farrokh Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures International Journal of Plasticity 23 2007 931 950 (Pubitemid 46366620)
26. A.S. Khan, R. Kazmi, B. Farrokh, and M. Zupan Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: experiments and modeling over a wide range of strain-rates and temperatures International Journal of Plasticity 23 2007 1105 1125 (Pubitemid 46498676)
27. A.P. Karafillis, and M.C. Boyce A general anisotropic yield criterion using bounds and a transformation weighting tensor Journal of the Mechanics and Physics of Solids 41 12 1993 1859 1886
28. S.P. Keeler, and W.A. Backhofen Plastic instability and fracture in sheet stretched over rigid punches ASM Transactions 1964 25 48
29. K.J. Kim, D. Kim, S.H. Choi, K. Chung, K.S. Shin, F. Barlat, K.H. Oh, and J.R. Youn Formability of AA5182/polypropylene/AA5182 sandwich sheets Journal of Material Processing Technology 139 1-3 2003 1 7
30. H.J. Kleemola, and M. Pelkkikangas Effect of predeformation and strain path on the forming limits of steel, copper and brass Sheet Metal Industries 54 1977 591 599
31. L. Lang, T. Li, X. Zhou, J. Danckert, and K.B. Nielsen The effect of the key process parameters in the innovative hydroforming on the formed parts Journal of Material Processing Technology 2007 304 308 (Pubitemid 46412836)
32. O.-G. Lademo, K.O. Pedersen, T. Berstad, T. Furu, and O.S. Hopperstad An experimental and numerical study on the formability of textured AlZnMg alloys European Journal of Mechanics - A/Solids 27 2 2008 1140 1169
33. D. Li, and A. Ghosh Tensile deformation behavior of aluminum alloys at warm forming temperatures Materials Science and Engineering A352 2003 279 286 (Pubitemid 36658948)
34. J. Lian, and B. Baudelet Forming limit diagram of sheet metal in the negative minor strain region Material Science and Engineering 86 1987 137 144 (Pubitemid 17566674)
35. Z. Marciniak, and K. Kuczynski Limit strains in the processes of stretch-forming sheet metal International Journal of Mechanical Sciences 9 1967 609 612
36. H. Mecking, and U.F. Kocks The development of strain-rate gradients Acta Metallurgica 27 3 1979 419 432
37. C.J. Neil, and S.R. Agnew Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B International Journal of Plasticity 25 2009 379 398
38. S. Nemat-Nasser, and Y. Li Flow stress of F.C.C. polycrystals with applications to OFHC Cu Acta Materialia 46 2 1998 565 577 (Pubitemid 128430061)
39. R.C. Picu, G. Vincze, F. Ozturk, J.J. Gracio, F. Barlat, and A.M. Maniatty Strain rate sensitivity of the commercial aluminum alloy AA5182-O Materials Science and Engineering A 390 2005 334 343 (Pubitemid 40019800)
40. D.W.A. Rees Sheet orientation and forming limits under diffuse necking Applied Mathematical Modelling 20 8 1996 624 635 (Pubitemid 126395625)
41. J.W. Signorelli, M.A. Bertinetti, and P.A. Turner Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model International Journal of Plasticity 25 2009 1 25
42. T.B. Stoughton A general forming limit criterion for sheet metal forming International Journal of Mechanical Sciences 42 2000 1 27
43. T.B. Stoughton, and J.W. Yoon Anisotropic hardening and non-associated flow in proportional loading of sheet metals International Journal of Plasticity 25 2009 1777 1817
44. D.V. Wilson Aluminium versus steel in the family car-the formability factor Journal of Mechanical Working Technology 16 3 1988 257 277 (Pubitemid 18652367)
45. P.D. Wu, J.D. Embury, D.J. Lloyd, Y. Huang, and K.W. Neale Effects of superimposed hydrostatic pressure on sheet metal formability International Journal of Plasticity 25 2009 1711 1725
46. J.W. Yoon, F. Barlat, K. Chung, F. Pourboghrat, and D.Y. Yang Earing predictions based on asymmetric nonquadratic yield function International Journal of Plasticity 16 2000 1075 1104
47. A.A. Zadpoor, J. Sinke, and R. Benedictus Formability prediction of high strength aluminum sheets International Journal of Plasticity 25 12 2009 2269 2297
48. F.J. Zerilli, and R.W. Armstrong The effect of dislocation drag on the stress-strain behavior of F.C.C. metals Acta Metallurgica et Materialia 40 1992 1803 1808 (Pubitemid 23564619)