Generalised forming limit diagrams showing increased forming limits with non-planar stress states

International Journal of Plasticity

Volumn 25, Issue 7, 2009, Pages 1207-1230

  Allwood, Julian M ^a   Shouler, Daniel R ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

A. Ductility; C. Mechanical testing; C. Stability and bifurcation; Forming limit diagrams

Indexed keywords

A. DUCTILITY; C. MECHANICAL TESTING; C. STABILITY AND BIFURCATION; ENGINEERING STRAINS; EXPERIMENTAL TECHNIQUES; FORMING LIMIT DIAGRAMS; FORMING LIMITS; HYDRO-FORMING; IN PLANES; INCREMENTAL SHEET FORMING; NORMAL FORCES; NORMAL STRESS; OPERATING WINDOWS; PROPORTIONAL LOADINGS; SHEET DEFORMATIONS; SHEET FORMING PROCESS; STRESS STATE; STRESS TENSORS; THICKNESS SHEARS; UNI-AXIAL TESTS; VISUAL REPRESENTATIONS; WORK PIECES;

BIFURCATION (MATHEMATICS); DUCTILITY; GRAPHIC METHODS; MECHANICAL ENGINEERING; MECHANICAL TESTING; METAL FORMING; PAPER SHEETING;

PRESSING (FORMING);

EID: 64749117043     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.11.001     Document Type: Article

References (75)

1. Allwood J.M., Houghton N.E., and Jackson K.P. The design of an incremental sheet forming machine. Shemet 2005 (2005), Erlangen, Germany
2. Allwood J.M., Shouler D.R., and Tekkaya A.E. The increased forming limits of incremental sheet forming processes. Shemet 2007 (2007), Palermo, Italy 1-4 October
3. Allwood J.M., and Shouler D.R. Paddle forming: a novel class of sheet metal forming processes. Annals of ClRP 56 1 (2007) 257-260
4. Aretz H. Numerical analysis of diffuse and localized necking in orthotropic sheet metals. Int. J. Plasticity 23 (2007) 798-840
5. Arrieux, R., Bedrin, C., Boivin, M., 1982. Determination of an intrinsic forming limit stress diagram for isotropic metal sheets. In: Proceedings of the 12th Biennial Congress of the IDDRG, pp. 61-71.
6. Arrieux R., Chalons J.M., Bedrin C., and Boivin M. Computer aided method for the determination of the FLD at necking. Annals of ClRP 33/1 (1984) 171-174
7. Bambach, M., 2008. Process strategies and modelling approaches for asymmetric incremental sheet forming, PhD Thesis, IBF Aachen, Germany.
8. Barata da Rocha A., Barlat F., and Jalinier J.M. Prediction of the forming limit diagram of anisotropic sheets in linear and non-linear loading. Mater. Sci. Eng. 68 (1984) 151-164
9. Barlat F. Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals. Mater. Sci. Eng. 91 (1987) 55
10. Bressan J.D., and Williams J.A. The use of a shear instability criterion to predict local necking in sheet metal deformation. Int. J. Mech. Sci. 25 (1983) 155-168
11. Bridgman P.W. Studies in Large Plastic Flow and Fracture (1952), McGraw-Hill, New York
12. Brunet, and Morestin. Experimental and analytical necking studies of anisotropic sheet metal. J. Mat. Proc. Tech. 112 (2001) 214-226
13. Butuc M.C., BaratadaRocha A., and Ferreira Duarte J. A more general model for forming limit diagrams prediction. J. Mat. Proc. Tech. 125-126 (2002) 213-218
14. Cao J., Yao H., and Karafillis A. Prediction of localized thinning in sheet metal using a general anisotropic yield criterion. Int. J. Plasticity 16 9 (2000) 1105-1129
15. Ferron G., Makkouk R., and Morreale J. A parametric description of orthotropic plasticity in metal sheets. Int. J. Plasticity 10 (1994) 431
16. Friedman P.A., and Pan J. Effects of plastic anisotropy and yield criteria on prediction of forming limit curves. Int. J. Mech. Sci. 42 (2000) 29-48
17. Fuchs Jr. F.J. Hydrostatic pressure: its role in metal forming. Mechanical Engineering (1966) 34-40 April
18. Geiger M., and Merklein M. Determination of forming limit diagrams - a new analysis method for characterization of materials' formability. Annals of CIRP 52 1 (2003)
19. Gemsamer M. Strength and ductility. Trans. ASM (1946)
20. Genevois, P., 1992, Etude expérimentale et modélisation du comportement plastique anisotrope de töles d'acier en grande déformations. Ph.D. Thesis, INPG, Grenoble, France.
21. Gillis P.P., and Jones S.E. Tensile deformation of a flat sheet. Int. J. Mech. Sci. 21 2 (1979) 109-117
22. Giuliano G., Carrino L., and Franchitti S. Formability of superplastic PbSn60. Materials Letters 59 17 (2005) 2156-2158
23. Goodwin, G.M., 1968. Application of Strain Analysis to Sheet Metal Forming in the Press Shop. SAE Paper 680093.
24. Gotoh M. Effect of out-of-plane stress on the forming limit of sheet metals. J.S.M.E. Int. J. A 38 1 (1995) 123-132
25. Graf A., and Hosford W.F. Calculations of forming limit diagrams for changing strain paths. Metall. Trans. A 24 (1993) 2497
26. Graf A., and Hosford W.F. Effect of changing strain paths on forming limit diagrams of Al 2008-T4. Metall. Trans. A 24 (1993) 2503
27. Graf A., and Hosford W.F. The influence of strain path changes on forming limit diagrams of Al 6111-T4. Int. J. Mech. Sci. 36 (1994) 897
28. Gronostajski J. Sheet metal forming limits for complex strain paths. J. Mech. Work. Tech. 10 (1984) 349-362
29. Hecker, S.S., 1972. A simple forming limit curve technique and results on aluminum alloys, sheet metal forming and formability. In: Proceedings of the 7th Biennial Congress of the IDDRG, Amsterdam, pp. 5.1-5.8.
30. Hill R. A theory of plastic bulging of a metal diaphragm by lateral pressure. Phil. Mag. Ser. 7 41 (1950) 1133-1142
31. Hill R. On discontinuous plastic states with special reference to localized necking in thin sheets. J. Mech. Phys. Solids 1 (1952) 19-30
32. Hill R. A user-friendly theory of orthotropic plasticity in sheet metals. Int. J. Mech. Sci. 35 (1993) 19
33. Hillier M.J. Instability strains in plane street under biaxial stress. Journal of Applied Mechanics, Transactions of the ASME 33 (1966) 282-288
34. Holmberg S., Enquist B., and Thilderkvist P. Evaluation of sheet metal formability by tensile tests. J. Mat. Proc. Tech. 145 (2004) 72-83
35. Hutchinson J.W., and Neale K.W. Sheet necking - II: time-independent behaviour. In: Koistinen D.P., and Wang N.M. (Eds). Mechanism of Sheet Metal Forming (1978), Plenum, New York pp. 127
36. Hutchinson J.W., and Neale K.W. Sheet necking -III: strain-rate effects. In: Koistinen D.P., and Wang N.M. (Eds). Mechanism of Sheet Metal Forming (1978), Plenum, New York pp. 269
37. Iseki H., Kato K., and Sakamoto S. Forming limit of flexible and incremental sheet metal bulging with a spherical roller Adv. Tech. Plasticity 1993 (Proceedings of Fourth ICTP) (1993) 1635-1640
38. Jackson, K.P., Allwood, J.M., in press. The mechanics of incremental sheet forming, J. Mat. Proc. Tech., doi:10.1016/j.jmatprotec.2008.03.025.
39. Jeswiet J., Micari F., Hirt G., Bramley A., Duflou J., and Allwood J. Asymmetric single point incremental forming of sheet metal. Annals of CIRP 54 2 (2005) 623-650
40. John Neil, C., Agnew, S.R., in press. Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B, Int. J. Plasticity, doi:10.1016/j.ijplas.2008.05.003.
41. Kalpakcioglu S. On the mechanics of shear spinning. J. Eng. Industry (1961) 125-130 May
42. Keeler, S., 1968. Circular grid system - a valuable aid for evaluating sheet metal formability. SAE Paper 680092, pp. 1-9.
43. Keeler S.P., and Backhofen W.A. Plastic instability and fracture in sheet stretched over rigid punches. ASM Trans. Quart. 56 (1963) 25-48
44. Khandeparkar T., and Siegert K. Hydromechanical deep drawing of cylindrical cups using a controllable sealing mechanism. Steel Research International 76 11 (2005) 866-873
45. Kleemola H.J., and Pelkkikangas M.T. Effect of pre-deformation and strain path on the forming limits of steel, copper and brass. Sheet Metal Industries 63 (1977) 559-591
46. Marin J., Hu L.W., and Hamburg J.F. Plastic stress-strain relations of Alcoa 14S-T6 for variable biaxial stress ratios. Trans. ASM 45 (1953) 686-709
47. Marciniak Z., and Kuczynski K. Limit strains in the processes of stretch forming sheet steel. J. Mech. Phys. Solids 1 (1967) 609-620
48. Marciniak Z., and Kolodziejski J. Assessment of sheet metal failure sensitivity by method of torsioning the rings. Proceedings of the Seventh Biennial Congress (1972), IDDRG, Amersterdam pp. 61-64
49. Marciniak Z., Kuczynski K., and Pokora T. Influence of the plastic properties of a material on the sheet forming limit diagram for sheet metal in tension. Int. J. Mech. Sci. 15 (1973) 789-805
50. Matin P.H., and Smith L.M. Practical limitations to the influence of through-thickness normal stress on sheet metal formability. Int. J. Plasticity 21 (2005) 671-690
51. McCarron T.J., Kain K.E., Hahn G.T., and Flanagan W.F. Effect of geometrical defects in forming sheet steel by biaxial stretching. Metall. Trans. A 19A (1988) 2067-2074
52. Nakamura K. Sheet metal forming with hydraulic counter pressure in Japan. Annals of CIRP 36 1 (1987) 191-194
53. Nakazima K., Kikuma T., and Asaku K. Study on the formability of steel sheet. Yawata Technical Report 284 (1968) 140-141
54. Negroni F., Kobayashi S., and Thomsen E.G. Plastic instability in simple stretching of sheet metals. J. Eng. Ind. 90 (1968) 387-392
55. Ozturk F., and Lee D. Experimental and numerical analysis of out-of-plane formability test. J. Mat. Proc. Tech. 170 (2005) 247-253
56. Parmar A., and Mellor P.B. Predictions of limit strains in sheet metal using a more general yield criterion. Int. J. Mech. Sci. 20 (1978) 385-391
57. Raghavan K.S. A simple technique to generate in-plane forming limit curves and selected applications. Metall. Trans. 26A (1995) 2075-2084
58. Signorelli J.W., Betinetti M.A., and Turner P.A. Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model. Int. J. Plasticity 25 (2009) 1-25
59. Smith L.M., Averill R.C., Lucas J.P., Stoughton T.B., and Matin P.H. Influence of transverse normal stress on sheet metal formability. Int. J. Plasticity 19 (2003) 1567-1583
60. Sowerby R., and Duncan D.L. Failure in sheet metal in biaxial tension. Int. J. Mech. Sci. 13 (1971) 217-229
61. Sowerby R., Chu E., and Duncan J.L. Determination of large strains in metal forming. J. Strain Analysis 17 2 (1982) 95-101
62. Sowerby R., and Chakravarti P.C. The determination of the equivalent strain in finite, homogeneous deformation processes. J. Strain Analysis 18 2 (1983) 119-123
63. Storen S., and Rice J.R. Localized necking in thin sheets. J. Mech. Phys. Solids 23 (1975) 421-441
64. Stoughton T.B., and Zhu X. Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int. J. Plasticity 20 (2004) 1463-1486
65. Swift H.W. Plastic instability under plane stress. J. Mech. Phys. Solids 1 (1952) 1-18
66. Tadros A.K., and Mellor P.B. Some comments on the limit strains in sheet metal stretching. Int. J. Mech. Sci. 17 (1975) 203-210
67. Tadros A.K., and Mellor P.B. An experimental study of the in-plane stretching of sheet metal. Int. J. Mech. Sci. 20 (1978) 121-134
68. Tan Z., Melin L., and Magnusson C. Application of an image processing technique in strain measurement in sheet metal forming. J. Mat. Proc. Tech. 33 (1992) 299-310
69. Vacher P., Haddad A., and Arrieux R. Determination of the forming limit diagrams using image analysis by the correlation method. Annals of ClRP 48/1 (1999) 227-230
70. Xu S., and Weinmann K.J. Prediction of forming limit curves of sheet metals using Hill's 1993 user-friendly yield criterion of anisotropic metals. Int. J. Mech. Sci. 42 (1998) 677-692
71. Xu S., and Weinmann K.J. Effect of deformation-dependent material parameters on forming limits of thin sheets. Int. J. Mech. Sci. 40 9 (2000) 913-925
72. Yao H., and Cao J. Prediction of forming limit curves using an anisotropic yield function with prestrain induced backstress. Int. J. Plasticity 18 (2002) 1013-1038
73. Yoshida K., Kuwabara T., and Kuroda M. Path-dependence of the forming limit stresses in a sheet metal. Int. J. Plasticity 23 (2007) 361-384
74. Yoshida K., and Kuwabara T. Effect of strain hardening behaviour on forming limit stresses of steel tube subjected to non-proportional loading paths. Int. J. Plasticity 23 (2007) 1260-1284
75. Zhao L., Sowerby R., and Sklad M.P. A theoretical and experimental investigation of limit strains in sheet metal forming. Int. J. Mech. Sci. 38 (1996) 1307-1317