A new method to test the fracture probability of all-ceramic crowns with a dual-axis chewing simulator

Dental Materials

Volumn 27, Issue 2, 2011, Pages

  Heintze, S D ^a   Albrecht, T ^a   Cavalleri, A ^a   Steiner, M ^b  

^a IVOCLAR VIVADENT AG   (Liechtenstein)

^b UNIVERSITY OF KIEL   (Germany)

Author keywords

Ceramic; Eccentric cyclic loading; Force sensor; Fracture; Leucite; Lithium disilicate

Indexed keywords

CERAMIC; ECCENTRIC CYCLIC LOADING; FORCE SENSOR; LEUCITE; LITHIUM DISILICATE;

CERAMIC MATERIALS; CYCLIC LOADS; FRACTURE; LABORATORIES; LITHIUM; LOADING; PRESSES (MACHINE TOOLS); SENSORS; SIMULATORS;

LOADS (FORCES);

ALUMINUM SILICATE; GLASS CERAMICS; IPS E.MAX PRESS; IPS EMPRESS CERAMIC; IPS-EMPRESS CERAMIC; LEUCITE; LITHIA DISILICATE; MONOBOND S; POLY(METHYL METHACRYLATE); TOOTH CEMENT;

ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL ACID ETCHING; DENTAL CARE; DENTAL SURGERY; DENTURE; HUMAN; INSTRUMENTATION; MASTICATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; MOLAR TOOTH; SURFACE PROPERTY; TEMPERATURE; TOOTH CROWN; TOOTH PROSTHESIS; VALIDATION STUDY;

ACID ETCHING, DENTAL; ALUMINUM SILICATES; BITE FORCE; CERAMICS; COMPUTER-AIDED DESIGN; CROWNS; DENTAL ABUTMENTS; DENTAL CEMENTS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; HUMANS; MATERIALS TESTING; MOLAR; POLYMETHYL METHACRYLATE; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE;

EID: 78651246863     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.09.004     Document Type: Article

References (41)

1. M.B. Blatz Long-term clinical success of all-ceramic posterior restorations Quintessence Int 33 2002 415 426
2. J. Manhart, H. Chen, G. Hamm, and R. Hickel Buonocore Memorial Lecture. Review of the clinical survival of direct and indirect restorations in posterior teeth of the permanent dentition Oper Dent 29 2004 481 508
3. K.A. Malament, and D.G. Grossman Bonded vs. non bonded Dicor crowns: four years report J Dent Res 71 Spec Iss 1992 [abstract 1720]
4. K.A. Malament, S.S. Socransky, V. Thompson, and D. Rekow Survival of glass-ceramic materials and involved clinical risk: variables affecting long-term survival Pract Proced Aesthet Dent Suppl. 2003 5 11
5. J.A. Sorensen, C. Choi, M.I. Fanuscu, and W.T. Mito IPS Empress crown system: three-year clinical trial results J Calif Dent Assoc 26 1998 130 136
6. J.R. Kelly Clinically relevant approach to failure testing of all-ceramic restorations J Prosthet Dent 81 1999 652 661
7. M. Steiner, M.E. Mitsias, K. Ludwig, and M. Kern In vitro evaluation of a mechanical testing chewing simulator Dent Mater 25 2009 494 499
8. S.D. Heintze How to qualify and validate wear simulation devices and methods Dent Mater 22 2006 712 734
9. M. Kern, J.R. Strub, and X.Y. Lü Wear of composite resin veneering materials in a dual-axis chewing simulator J Oral Rehabil 26 1999 372 378
10. C.H. Gibbs, H.C. Lundeen, P.E. Mahan, and J. Fujimoto Chewing movements in relation to border movements at the first molar J Prosthet Dent 46 1981 308 322
11. H. Panek, T. Matthews-Brzozowska, D. Nowakowska, B. Panek, G. Bielicki, and S. Makacewicz Dynamic occlusions in natural permanent dentition Quintessence Int 39 2008 337 342
12. G. Bader, and G. Lavigne Sleep bruxism: an overview of an oromandibular sleep movement disorder Sleep Med Rev 4 2000 27 43
13. P.G. Coelho, E.A. Bonfante, N.R. Silva, E.D. Rekow, and V.P. Thompson Laboratory simulation of Y-TZP all-ceramic crown clinical failures J Dent Res 88 2009 382 386
14. P.G. Coelho, N.R. Silva, E.A. Bonfante, P.C. Guess, E.D. Rekow, and V.P. Thompson Fatigue testing of two porcelain-zirconia all-ceramic crown systems Dent Mater 25 2009 1122 1127
15. T. Santana, Y. Zhang, P. Guess, V.P. Thompson, E.D. Rekow, and N.R. Silva Off-axis sliding contact reliability and failure modes of veneered alumina and zirconia Dent Mater 25 2009 892 898
16. E.A. Bonfante, P.G. Coelho, P.C. Guess, V.P. Thompson, and N.R. Silva Fatigue and damage accumulation of veneer porcelain pressed on Y-TZP J Dent 38 2010 318 324
17. M. Rosentritt, M. Behr, R. Gebhard, and G. Handel Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures Dent Mater 22 2006 176 182
18. C.F. Stappert, W. Att, T. Gerds, and J.R. Strub Fracture resistance of different partial-coverage ceramic molar restorations: an in vitro investigation J Am Dent Assoc 137 2006 514 522
19. M. Rosentritt, M. Behr, and G. Handel Fixed partial dentures: all-ceramics, fibre-reinforced composites and experimental systems J Oral Rehabil 30 2003 873 877
20. A. Attia, and M. Kern Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems J Prosthet Dent 92 2004 551 556
21. S. Eschbach, S. Koutayas, and M. Kern Fracture strength of resin-bonded all-ceramic fixed partial dentures J Dent Res Spec Issue A 2005 [abstract no. 430]
22. A. Attia, K.M. Abdelaziz, S. Freitag, and M. Kern Fracture load of composite resin and feldspathic all-ceramic CAD/CAM crowns J Prosthet Dent 95 2006 117 123
23. E.D. Rekow, M. Harsono, M. Janal, V.P. Thompson, and G. Zhang Factorial analysis of variables influencing stress in all-ceramic crowns Dent Mater 22 2006 125 132
24. A.R. Studart, F. Filser, P. Kocher, and L.J. Gauckler Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges Dent Mater 23 2007 106 114
25. L.C. Sobrinho, M.J. Cattell, R.H. Glover, and J.C. Knowles Investigation of the dry and wet fatigue properties of three all-ceramic crown systems Int J Prosthodont 11 1998 255 262
26. S.S. Scherrer, and W.G. de Rijk The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli Int J Prosthodont 6 1993 462 467
27. S.K. Lee, and P.R. Wilson Fracture strength of all-ceramic crowns with varying core elastic moduli Aust Dent J 45 2000 103 107
28. Anusavice KJ Mechanical properties of dental materials K.J. Anusavice, Phillip's Science of Dental Materials 2003 Saunders St. Louis
29. E. Asmussen, and A. Peutzfeldt Resin composites: strength of the bond to dentin versus surface energy parameters Dent Mater 21 2005 1039 1043
30. H.J. Schindler, E. Stengel, and W.E. Spiess Feedback control during mastication of solid food textures - a clinical-experimental study J Prosthet Dent 80 1998 330 336
31. K. Kohyama, E. Hatakeyama, T. Sasaki, T. Azuma, and K. Karita Effect of sample thickness on bite force studied with a multiple-point sheet sensor J Oral Rehabil 31 2004 327 334
32. C.H. Gibbs, P.E. Mahan, H.C. Lundeen, K. Brehnan, E.K. Walsh, and W.B. Holbrook Occlusal forces during chewing and swallowing as measured by sound transmission J Prosthet Dent 46 1981 443 449
33. K. Nishigawa, E. Bando, and M. Nakano Quantitative study of bite force during sleep associated bruxism J Oral Rehabil 28 2001 485 491
34. I. Krejci, P. Albert, and F. Lutz The influence of antagonist standardization on wear J Dent Res 78 1999 713 719
35. N.P. Lang, and E.F. Corbet Periodontal diagnosis in daily practice Int Dent J 45 1995 3 15
36. N. Ereifej, N. Silikas, and D.C. Watts Initial versus final fracture of metal-free crowns, analyzed via acoustic emission Dent Mater 2008 1289 1295
37. S.D. Heintze, and V. Rousson Fracture rate of IPS Empress all-ceramic crowns - a systematic review Int J Prothodont 23 2010 129 133
38. K. Böning, U. Ullmann, A. Wolf, K. Lazarek, and M. Walter Dreijährige klinische Bewährung konventionell zementierter Einzelkronen aus Lithiumdisilikat-Keramik Deutsch Zahnärzt Z 61 2006 604 611
39. M.K. Etman 7-Year clinical evaluation of all-ceramic crowns: wear and cracks analysis J Dent Res 87 Spec Issue A 2008 [abstract no. 308]
40. Ivoclar-Vivadent - Scientific Documentation 2004 IPS Empress
41. Ivoclar-Vivadent - Scientific Documentation 2009 e.max Press