Switched reluctance machines for hybrid electric vehicles

19th International Conference on Electrical Machines, ICEM 2010

Volumn , Issue , 2010, Pages

  Smaka, Senad ^a   Masic S ^a   Cosovic M ^a   Salihbegovic I ^b  

^a UNIVERSITY OF SARAJEVO   (Bosnia and Herzegovina)

^b Public Enterprise Electric Utility of Bosnia and Herzegovina Jablanica   (Bosnia and Herzegovina)

Author keywords

Hybrid electric vehicle; Static characteristics; Switched reluctance machine

Indexed keywords

DESIGN FORMULAE; FLUX LINKAGES; HYBRID ELECTRIC VEHICLE; NEW DESIGN; ROTOR POLES; ROTOR POSITION; SIMULATION RESULT; STATIC CHARACTERISTIC; STATIC TORQUE; STATOR CURRENTS; SWITCHED RELUCTANCE MACHINE; TORQUE DENSITY; TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS;

AUTOMOBILES; ELECTRIC MACHINERY; ELECTRIC VEHICLES; FINITE ELEMENT METHOD; MACHINE DESIGN; POLES; SECONDARY BATTERIES; STATORS; SWITCHING SYSTEMS;

ELECTRIC DRIVES;

EID: 78649576077     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICELMACH.2010.5608220     Document Type: Conference Paper

References (36)

1. G. Maggetto, J. Van Mierlo, "Electric and Hybrid Electric Vehicle Technology: A Survey," IEE Publication, 2000.
2. M. Ehsani, Y. Gao, S. E. Gay, A. Emadi, "Modern electric, hybrid electric, and fuel cell vehicles: fundamentals, theory, and design," CRC Press LLC, 2005, pp. 239-276.
3. K. T. Chau, Z. Wang, "Overview of power electronic drives for electric vehicles," HAIT Journal of Science and Engineering B, vol. 2, issues 5-6, pp. 737-761, June 2005.
4. K. M. Rahman, S. E. Schulz, "Design of High-Efficiency and High-Torque-Density Switched Reluctance Motor for Vehicle Propulsion.," IEEE Transactions on Industry Applications, vol. 38, no. 6, pp. 1500-1507, November/December 2002.
5. A. H. Isfahani, S. Sadeghi, "Design of a Permanent Magnet Synchronous Machine for the Hybrid Electric Vehicle," International Journal of Electrical, Computer, and Systems Engineering 2, 2008.
6. K. T. Chau, C. C. Chan, C. Liu, "Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles," IEEE Transactions on Industrial Electronics, vol. 55, no. 6, pp. 2246-2257, June 2008.
7. M. Zeraoulia, M. E. H. Benbouzid, D. Diallo, "Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study," IEEE Transactions on Vehicular Technology, vol. 55, no. 6, pp. 1756-1764, November 2006.
8. J. M. Miller, P. J. McCleer, J. H. Lang, "Starter-Alternator for Hybrid Electric Vehicle: Comparison of Induction and Variable Reluctance Machines and Drives," Conference Record of IEEE Industrial Applications Society Annual Meeting, vol. 1, pp. 513-523, 1998.
9. K. M. Rahman, S. E. Schulz, "High-Performance Fully Digital Switched Reluctance Motor Controller for Vehicle Propulsion," IEEE Transactions on Industry Applications, vol. 38, no. 4, pp. 1062-1071, July/August 2002.
10. S. Wang, Q. Zhan, Z. Ma, L. Zhou, "Implementation of a 50-kW Four-Phase Switched Reluctance Motor Drive System for Hybrid Electric Vehicle," IEEE Transactions on Magnetics, vol. 41, no. 1, pp. 501-504, January 2005.
11. T. Finken, M. Felden, K. Hameyer, "Comparison and design of different electrical machine types regarding their applicability in hybrid electrical vehicles," Proceedings of the 2008 International Conference On Electrical Machines, PaperID 988.
12. P. C. Desai, M. Krishnamurthy, N. Schofield, A. Emadi, "Novel Switched Reluctance Machine Configuration with Higher Number of Rotor Poles than Stator Poles," IEEE Transactions on Industrial Electronics, vol. 57, no. 2, pp. 649-659, February 2010.
13. J. P. Hong, K. H. Ha, J. Lee, "Stator Pole and Yoke Design for Vibration Reduction of Switched Reluctance Motor," IEEE Transactions on Magnetics, vol. 38, no. 2, pp. 929-932, 2002.
14. W. Cai, P. Pillay, Z. Tang, A. M. Omekanda, "Low-Vibration Design of Switched Reluctance Motors for Automotive Applications Using Modal Analysis," IEEE Transactions on Industry Applications, vol. 39, no. 4, pp. 971-977, July/August 2003.
15. P. O. Rasmussen, J. H. Andreasen, J. M. Pijanowski, "Structural Stator Spacers - A Solution for Noise Reduction of Switched Reluctance Motor," IEEE Transactions on Industry Applications, vol. 40, no. 2, pp. 574-581, March/April 2004.
16. D. E. Cameron, J. H. Lang, S. D. Umans, "The Origin and Reduction of Acoustic Noise in Doubly Salient Variable-Reluctance Motors," IEEE Transactions on Industry Applications, vol. 28, no. 6, pp. 1250-1255, November/December 1992.
17. C. Pollock, C. Y. Wu, "Acoustic Noise Cancellation Techniques for Switched Reluctance Drives," IEEE Transactions on Industry Applications, vol. 33, no. 2, pp. 477-484, March/April 1997.
18. K. H. Ha, Y. K. Kim, G. H. Lee, J. P. Hong, "Vibration Reduction of Switched Reluctance Motor by Experimental Transfer Function and Response Surface Methodology," IEEE Transactions on Magnetics, vol. 40, no. 2, pp. 577-580, March 2004.
19. M. S. Islam, I. Husain, "Torque-ripple minimization with indirect position and speed sensing for switched reluctance motors," IEEE Transactions on Industrial Electronics, vol. 47, no. 5, pp. 1126-1133, October 2000.
20. I. Husain, "Minimization of Torque Ripple in SRM Drives," IEEE Transactions on Industrial Electronics, vol. 49, no. 1, pp. 28-39, February 2002.
21. N. K. Sheth, K. R. Rajagopal, "Optimum Pole Arcs for a Switched Reluctance Motor for Higher Torque With Reduced Ripple," IEEE Transactions on Magnetics, vol. 39, no. 5, pp. 3214-3216, September 2003.
22. J. W. Lee, H. S. Kim, B. I. Kwon, B. T. Kim, "New Rotor Shape Design for Minimum Torque Ripple of SRM Using FEM," IEEE Transactions on Magnetics, vol. 40, no. 2, pp. 754-757, 2004.
23. Y. K. Choi, H. S. Yoon, C. S. Koh, "Pole-Shape Optimization of a Switched-Reluctance Motor for Torque Ripple Reduction," IEEE Transactions on Magnetics, vol. 43, no. 4, pp. 1797-1800, 2007.
24. Z. Rahman, M. Ehsani, K. L. Butler, "An Investigation of Electric Motor Drive Characteristics for EV and HEV Propulsion Systems," SAE Technical Papers 2000-01-3062, 2000 Future Transportation Technology Conference, Costa Mesa, California, August 2000.
25. S. S. Williamson, A. Khaligh, A. Emadi, "Impact of Utilizing Selective Motor Topologies and Control Strategies on the Overall Performance of Integrated Starter Alternator (ISA) Based HEVs", Proceedings of the IEEE International Electric Machines and Drives Conference, vol. 1, pp. 134-139, Antalya, Turkey, May 2007.
26. W. Wu, H. C. Lovatt, J. B. Dunlop, "Optimization Of Switched Reluctance Motors For Hybrid Electric Vehicles," Conference Publications of the International Conference on Power Electronics, Machines and Drives, no. 487, pp. 177-182, University of Bath, United Kingdom, June 2002.
27. B. Fahimi, A. Emadi, R. B. Sepe, "A Switched Reluctance Machine-Based Starter/Alternator for More Electric Cars," IEEE Transactions on Energy Conversion, vol. 19, no. 1, pp. 116-124, March 2004.
28. K. Ohyama, K. Aso, M. N. F. Nashed, H. Fujii, H. Uehara "Design Using Finite Element Analysis of Switched Reluctance Motor for Electric Vehicle," Journal of Asian Electric Vehicles, vol. 3, no. 2, pp. 793-800, December 2005.
29. K. Watanabe, S. Aida, A. Komatsuzaki, I. Miki, "Driving Force Characteristics of 40kW Switched Reluctance Motor for Electric Vehicle," Proceedings of International Conference On Electrical Machines and Systems ICEMS 2007, pp. 1894-1898, Seoul, Korea, October 2007.
30. P. A. Watterson, W. Wu, B. A. Kalan, H. C. Lovatt, G. Prout, J. B. Dunlop, S. J. Collocott, "A Switched-Reluctance Motor/Generator for Mild Hybrid Vehicles," Proceedings of the International Conference On Electrical Machines and Systems ICEMS 2008, pp. 2808-2813, Wuhan, China, October 2008.
31. N. Schofield, S. A. Long, D. Howe, M. McClelland, "Design of a Switched Reluctance Machine for Extended Speed Operation," IEEE Transactions on Industry Applications, vol.45, no. 1, pp. 116-122, January/February 2009.
32. Š. Mašić, R. Gačanović, S. Smaka, N. Isabegović, "Computation and experimental determination of flux linkage and static torque in switched-reluctance motor," Proceedings of International Conference On Electrical Machines ICEM 2000, pp. 1586-1589, Helsinki, Finland, August 2000
33. Š. Mašić, Z. Avdagić, S. Smaka, "Mathematical Model for Switched-Reluctance Motor Based on Matlab/Simulink Package," Proceedings of International Conference On Electrical Machines ICEM 2002, Bruges, Belgium, August 2002.
34. Š. Mašić, J. Čorda, S. Smaka, "Computation of Static, Steady-state and Dynamic Characteristics of the Switched Reluctance Motor", Automatika, vol. 43, no. 3-4, pp. 109-117, 2002.
35. J. Čorda, Š. Mašić, J. M. Stephenson, "Computation and experimental determination of running torque waveforms in switched-reluctance motors", IEE Proceedings-B, vol.140, no. 6, pp. 387-392, November 1993.
36. T. J. E. Miller, "Electronic Control of Switched Reluctance Machines," Newnes Power Engineering Series, 2001, pp. 49-52.