Lamina emergent mechanisms and their basic elements

Journal of Mechanisms and Robotics

Volumn 2, Issue 1, 2010, Pages 1-9

  Jacobsen, Joseph O ^a   Winder, Brian G ^a   Howell, Larry L ^a   Magleby, Spencer P ^a  

^a Brigham Young University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BASIC ELEMENTS; BASIC MECHANISM; COMPLIANT MECHANISM; DESIGN ISSUES; FUNDAMENTAL COMPONENT; INITIAL STATE; MATERIAL PROPERTY; PLANAR FABRICATION; PLANAR MATERIAL; SPATIAL MECHANISM;

FABRICATION; MATERIALS PROPERTIES; MECHANISMS;

MACHINE DESIGN;

EID: 78649548249     PISSN: 19424302     EISSN: 19424310     Source Type: Journal    
DOI: 10.1115/1.4000523     Document Type: Article

References (71)

1. Howell, L. L., 2001, Compliant Mechanisms, Wiley, New York.
2. Jacobsen, J. O., Howell, L. L., and Magleby, S. P., 2007, "Fundamental Components for Lamina Emergent Mechanisms," ASME Paper No. IMECE2007-42311.
3. Lusk, C., and Howell, L., 2008, "Components, Building Blocks, and Demonstrations of Spherical Mechanisms in Microelectromechanical Systems," ASME J. Mech. Des., 130(3), p. 034503.
4. Sandia National Laboratories, 2005, SUMMiT V-Five Level Surface Micro-machining Technology Design Manual, Microelectronics Development Laboratory, Sandia National Laboratories.
5. Carter, J., Cowen, A., B., H., Mahadevan, R., Stonefield, M., and Wilcenski, S., 2005, PolyMUMPs Design Handbook, Revision 11.0, MEMSCAP Inc.
6. Tanner, D. M., Smith, N. F., Irwin, L. W., Eaton, W. P., Helgesen, K. S., Clement, J. J., Miller, W. M., Walraven, J. A., Peterson, K. A., Tangyunyong, P., Dugger, M. T., and Miller, S. L., 2000, "MEMS Reliability: Infrastructure, Test Structures, Experiments, and Failure Modes," Sandia National Laboratories Report No. SAND2000-0091.
7. Howell, L. L., and Midha, A., 1994, "A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots," ASME J. Mech. Des., 116(1), pp. 280-290.
8. Howell, L. L., and Midha, A., 1995, "Parametric Deflection Approximations for End-Loaded, Large-Deflection Beams in Compliant Mechanisms," ASME J. Mech. Des., 117(1), pp. 156-165.
9. Howell, L. L., Midha, A., and Norton, T. W., 1996, "Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-Rigid-Body Model of Large-Deflection Compliant Mechanisms," ASME J. Mech. Des., 118, pp. 126-131.
10. Canfield, S., and Frecker, M., 2000, "Topology Optimization of Compliant Mechanical Amplifiers for Piezoelectric Actuators," Struct. Multidiscip. Optim., 20(4), pp. 269-279.]
11. Pedersen, C. B. W., Buhl, T., and Sigmund, O., 2001, "Topology Synthesis of Large-Displacement Compliant Mechanisms," Int. J. Numer. Methods Eng., 50(12), pp. 2683-2705.
12. Mankame, N. D., and Ananthasuresh, G. K., 2004, "Topology Optimization for Synthesis of Contact-Aided Compliant Mechanisms Using Regularized Contact Modeling," Comput. Struct., 82(15-16), pp. 1267-1290.
13. Chen, S., and Wang, M. Y., 2007, "Designing Distributed Compliant Mechanisms With Characteristic Stiffness," ASME Paper No. DETC2007-34437.
14. Lu, K.-J., and Kota, S., 2006, "Topology and Dimensional Synthesis of Compliant Mechanisms Using Discrete Optimization," ASME J. Mech. Des., 128(5), pp. 1080-1091.
15. Parise, J. J., Howell, L. L., and Magleby, S. P., 2000, "Ortho-Planar Mechanisms," ASME Paper No. DETC2000/MECH-14193.
16. McCarthy, J. M., 2000, Geometric Design of Linkages, Springer, New York.
17. Parise, J. J., Howell, L. L., and Magleby, S. P., 2001, "Ortho-Planar Linear-Motion Springs," Mech. Mach. Theory, 36(11-12), pp. 1281-1300.
18. Lusk, C. P., 2005, "Ortho-Planar Mechanisms for Microelectromechanical Systems," Ph.D. thesis, Brigham Young University, Provo, UT.
19. Carroll, D. W., Magleby, S. P., Howell, L. L., Todd, R. H., and Lusk, C. P., 2005, "Simplified Manufacturing Through a Metamorphic Process for Compliant Ortho-Planar Mechanisms," ASME Paper No. IMECE2005-80293.
20. Lusk, C. P., and Howell, L. L., 2006, Design Space of Single-Loop Planar Folded Micro Mechanisms With Out-of-Plane Motion, ASME J. Mech. Des., 128(5), pp. 1092-1100.
21. Dai, J. S., and Jones, J. R., 1999, "Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds," ASME J. Mech. Des., 121(3), pp. 375-382.
22. Dai, J. S., and Jones, J. R., 2005, "Matrix Representation of Topological Configuration Transformation of Metamorphic Mechanisms," ASME J. Mech. Des., 127(4), pp. 837-840.
23. Kuo, C. H., and Yan, H. S., 2007, "On the Mobility and Configuration Singularity of Mechanisms With Variable Topologies," ASME J. Mech. Des., 129(6), pp. 617-624.
24. Dai, J. S., and Cannella, F., 2008, "Stiffness Characteristics ofCarton Folds for Packaging," ASME J. Mech. Des., 130(2), p. 022305.
25. Liu, H., and Dai, J. S., 2002, "Carton Manipulation Analysis Using Configuration Transformation," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 216(C5), pp. 543-555.
26. Dubey, V. N., and Dai, J. S., 2006, "A Packaging Robot for Complex Cartons," Ind. Robot, 33(2), pp. 82-87.
27. Dai, J. S., and Qixian, Z., 2000, "Metamorphic Mechanisms and Their Configuration Models," Chin. J. Mech. Eng., 13(3), pp. 212-218.
28. Dehdashti, G., and Schmidt, L. C., 1995, "Barrel-Vault Space Trusses Shaped by Posttensioning," J. Struct. Eng., 121(12), pp. 1758-1764.
29. Schmidt, L. C., and Li, H., 1995, "Geometric Models of Deployable Metal Domes," J. Archit. Eng., 1(3), pp. 115-120.
30. Dehdashti, G., and Schmidt, L. C., 1996, "Dome-Shaped Space Trusses Formed by Means of Posttensioning," J. Struct. Eng., 122(10), pp. 12401245.
31. Onoda, J., Fu, D. Y., and Minesugi, K., 1996, "Two-Dimensional Deployable Hexapod Truss," J. Spacecr. Rockets, 33(3), pp. 416-421.
32. Takamatsu, K. A., and Onoda, J., 1991, "New Deployable Truss Concepts for Large Antenna Structures or Solar Concentrators," J. Spacecr. Rockets, 28(3), pp. 330-338.
33. Gan, W., and Pellegrino, S., 2006, "Numerical Approach to the Kinematic Analysis of Deployable Structures Forming a Closed Loop," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 220(7), pp. 1045-1056.
34. Chen, Y., and You, Z., 2005, "Mobile Assemblies Based on the Bennett Linkage," Proc. R. Soc. London, Ser. A, 461, pp. 1229-1245.
35. Chen, Y., and You, Z., 2004, "Deployable Structures Based on the Bricard Linkages," Proceedings of the 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA Paper No. 2004-1604.
36. Baker, J. E., 2007, "Kinematic Investigation of the Deployable Bennett Loop," ASME J. Mech. Des., 129(6), pp. 602-610.
37. Baker, J. E., 2006, "On Generating a Class of Foldable Six-Bar Spatial Linkages," ASME J. Mech. Des., 128(2), pp. 374-383.
38. Melin, N. O., 2004, "Application of Bennett Mechanisms to Long-Span Shelters," Ph.D. thesis, University of Oxford, Oxford, England.
39. Chen, Y., 2003, "Design of Structural Mechanisms," Ph.D. thesis, University of Oxford, Oxford, England.
40. Mankame, N. D., and Ananthasuresh, G. K., 2002. "Contact Aided Compliant Mechanisms: Concept and Preliminaries," ASME Paper No. DETC2002/ MECH-34211.
41. Mackay, A. B., Magleby, S. P., and Howell, L. L., 2007, "A Pseudo-Rigid- Body Model for Rolling-Contact Compliant Beams," ASME Paper No. DETC2007-35536.
42. Mankame, N., and Ananthasuresh, G., 2006, "Synthesis of contact-Aided Compliant Mechanisms for Non-Smooth Path Generation," Proceedings of the 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Vol. 4, pp. 2281-2303.
43. Wolhart, K., 1996, "Kinematotropic Mechanisms," Recent Advances in Robot Kinematics, Kluwer, Dordrecht, The Netherlands.
44. Galletti, C., and Giannotti, E., 2002, "Multiloop Kinematotrophic Mechanisms," Proceedings of the 2002 ASME Design Engineering Technical Conferences, pp. 455-460.
45. Balkcom, D., 2004, "Robotic Origami Folding," Ph.D. thesis, Carnegie Mellon University, Pittsburgh, PA.
46. Song, G., and Amato, N. M., 2004, "A Motion Planning Approach to Folding: From Paper Craft to Protein Folding," IEEE Trans. Rob. Autom., 20(1), pp.60-71.
47. Hull, T., and Belcastro, S. M., 2001, "Modeling the Folding of Paper Into Three Dimensions," Proceedings of the 3rd International Meeting of Origami Science, Math, and Education.
48. Hoffmann, R., 2001, "Airbag Folding: Origami Design Applied to an Engineering Problem," Proceedings of the 3rd International Meeting of Origami Science, Math, and Education.
49. Hyde, R., and Dixit, S., 2001, "Use of Origami in Fielding Very Large Space Telescopes," Proceedings of the 3rd International Meeting of Origami Science, Math, and Education.
50. Balkcom, D. J., Demaine, E. D., and Demaine, M. L., 2004, "Folding Paper Shopping Bags," Proceedings of the 14th Annual Fall Workshop on Computational Geometry, pp. 14-15.
51. Rodriguez Leal, E., and Dai, J. S., 2007, "From Origami to a New Class of Centralized 3-DOF Parallel Mechanisms," ASME Paper No. DETC2007-35516.
52. Yao, W., and Dai, J., 2008, "Dexterous Manipulation of Origami Cartons With Robotic Fingers Based on the Interactive Configuration Space," ASME J. Mech. Des., 130(2), p. 022303.
53. Jackson, P., and Forrester, P., 1993, The Pop-Up Book: Step-by-Step Instructions for Creating Over 100 Original Paper Projects, LLC, New York.
54. Carter, D. A., and Diaz, J., 1999, The Elements of Pop-Up: A Pop-Up Book for Aspiring Paper Engineers, Little Simon, New York.
55. Birmingham, D., 2006, Pop-Up! A Manual of Paper Mechanisms, Tarquin Publications, St. Albans, United Kingdom.
56. Last, M., Subramaniam, V., and Pister, K., 2005, Out of Plane Motion of Assembled Microstructures Using a Single-Mask SOI Process, Digest of Technical Papers-International Conference on Solid State Sensors and Actuators and Microsystems, TRANSDUCERS '05, 1, pp. 684-687.
57. Lusk, C. P., and Howell, L. L., 2008, "Spherical Bistable Micromechanism," ASME J. Mech. Des., 130(4), p. 045001.
58. Vehar, C., Kota, S., and Dennis, R., 2004. "Closed-Loop Tape Springs as Fully Compliant Mechanisms-Preliminary Investigations," ASME Paper No. DETC2004-57403.
59. Zhou, H., and Ting, K.-L., 2008, "Geometric Modeling and Optimization of Multimaterial Compliant Mechanisms Using Multilayer Wide Curves," ASME J. Mech. Des., 130, p. 062303.
60. Henrie, A. J. M., and Howell, L. L., 1998, Variable Compliance Via Magneto-Rheological Materials, Proceedings of the 43rd International SAMPE Symposium, pp. 431-443.
61. Shulman, Z. P., and Kordonsky, V. I., 1982, The Magneto-Rheological Effect, Nauka i Tekhnika, Minsk.
62. Halsey, T. C., 1992, "Electrorheological Fluids," Science, 258(5083), pp.761-766.
63. DiBiasio, C. M., Culpepper, M. L., Panas, R., Howell, L. L., and Magleby, S. P., 2008, "Comparison of Molecular Simulation and Pseudo-Rigid-Body Model Predictions for a Carbon Nanotube-Based Compliant Parallel-Guiding Mechanism," ASME J. Mech. Des., 130(4), p. 042308.
64. Hartenburg, R. S., and Denavit, J., Kinematic Synthesis of Linkages (McGraw-Hill, New York, 1964).
65. Barker, C. R., 1985, "Complete Classification of Planar Four-Bar Linkages," Mech. Mach. Theory, 20(6), pp. 535-554.
66. Jacobsen, J. O., Chen, G., Howell, L. L., and Magleby, S. P., "Lamina Emergent Torsion (LET) Joint," Mech. Mach. Theory, in press.
67. Hunt, K. H., 1990, Kinematic Geometry of Mechanisms, Oxford University Press, New York.
68. Winder, B. G., Magleby, S. P., and Howell, L. L., 2008, "A Study of Joints Suitable for Lamina Emergent Mechanisms," ASME Paper No. DETC2008-49914.
69. Winder, B. G., Magleby, S. P., and Howell, L. L., 2009, "Kinematic Representations of Pop-Up Paper Mechanisms," ASME J. Mech. Rob., 1(2), p.021009.
70. Barker, C. R., and Lo, J., 1986, "Classification of Spherical Four-Bar Mechanisms," ASME Paper No. 86-DET-144.
71. Chiang, C., 1988, Kinematics of Spherical Mechanisms, Cambridge University Press, Cambridge.