Experimental investigation of chain link forces in continuously variable transmissions

Journal of Mechanical Design

Volumn 132, Issue 12, 2010, Pages

  De Novellis, L ^a   Carbone, G ^a  

^a POLITECNICO DI BARI   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

FLASH MEMORY; STRAIN GAGES;

CHAIN LINKS; CHAIN-TYPE; CONTINUOUSLY VARIABLE TRANSMISSION; DATALOGGER; EXPERIMENTAL ANALYSIS; EXPERIMENTAL INVESTIGATIONS; MEASURING DEVICE; STRAIN DATA; STRAIN-GAGES; TENSION DISTRIBUTION;

CHAINS;

EID: 78649544824     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4002764     Document Type: Article

References (32)

1. Brown, A. W., van Rooij, J., and Frank, A. A., 2004, "The Design of an Inline GCI Chain CVT for Large Vehicles," International Continuously Variable and Hybrid Transmission Congress, UC Davis, Paper No. 54.
2. Mangialardi, L., and Mantriota, G., 1992, "The Advantages of Using Continuously Variable Transmission in Wind Power Systems," Renewable Energy, 2(3), pp. 201-209.
3. Mangialardi, L., and Mantriota, G., 1994, "Automatically Regulated CVT in Wind Power Systems," Renewable Energy, 4(3), pp. 299-310.
4. Mangialardi, L., and Mantriota, G., 1994, "Continuously Variable Transmission With Torque-Sensing Regulators in Waterpumping Windmills," Renewable Energy, 4(7), pp. 807-823.
5. Mangialardi, L., and Mantriota, G., 1996, "Dynamic Behaviour of Wind Power Systems Equipped With Automatically Regulated Continuously Variable Transmission," Renewable Energy, 7(2), pp. 185-203.
6. Idan, M., and Lior, D., 2000, "Continuous Variable Speed Wind Turbine Transmission Concept and Robust Control," Wind Eng., 24(3), pp. 151-167.
7. Carbone, G., DeNovellis, L., Commissaris, G., and Steinbuch, M., 2010, "An Enhanced CMM Model for the Prediction of Steady-State Performance in CVT Chain Drives," ASME J. Mech. Des., 132(2), p. 021005.
8. Ide, T., Uchiyama, H., and Kataoka, R., 1996, "Experimental Investigation on Shift Speed Characteristics of a Metal V-Belt CVT," JSAE Paper No. 9636330.
9. Ide, T., Udagawa, A., and Kataoka, R., 1995, "Simulation Approach to the Effect of the Ratio Changing Speed of a Metal V-Belt CVT on the Vehicle Response," Veh. Syst. Dyn., 24, pp. 377-388.
10. Bonsen, B., Klaassen, T. W. G. L., Pulles, R. J., Simons, S. W. H., Steinbuch, M., and Veenhuizen, P. A., 2005, "Performance Optimisation of the Push-Belt CVT by Variator Slip Control," Int. J. Veh. Des., 39(3), pp. 232-256.
11. Van der Meulen, S. H., van der Noll, E., de Jager, A. G., van der Sluis, F., Veenhuizen, P. A., and Steinbuch, M., 2007, "Experimental Investigation of Macro-Slip in a Pushbelt CVT Variator," Proceedings of the 2007 International Congress on Continuously Variable and Hybrid Transmissions, Yokohama, Japan.
12. Bonsen, B., Klaassen, T. W. G. L., van deMeerakker, K. G. O., Steinbuch, M., and Veenhuizen, P. A., 2003, "Analysis of Slip in a Continuously Variable Transmission," Proceedings of the IMECE'03, 2003 ASME International Mechanical Engineering Congress, Washington, DC, Nov. 15-21, Paper No. IMECE2003-41360, Vol. 72, No. 2, pp. 995-1000.
13. Rothenbühler, Y., 2009, "New Slip Synthesis and Theoretical Approach of CVT Slip Control," Ph.D. thesis, Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland.
14. Simons, S. W. H., Klaassen, T. W. G. L., Steinbuch, M., Veenhuizen, P. A., and Carbone, G., 2008, "Shift Dynamics Modelling for Optimization Variator Slip Control in a Push-Belt CVT," Int. J. Veh. Des., 48(1/2), pp. 45-64.
15. van der Noll, E., van der Sluis, F., van Dongen, T., and van der Velde, A., 2008, "Innovative Self-Optimizing Clamping Force Strategy Boosts Efficiency of the Pushbelt CVT," Seventh International CTI Symposium\Innovative Automotive Transmissions, Berlin, Germany, Dec. 1-4.
16. Carbone, G., Mangialardi, L., and Mantriota, G., 2005, "The Influence of Pulley Deformations on the Shifting Mechanisms of MVB-CVT," ASME J. Mech. Des., 127, pp. 103-113.
17. Carbone, G., Mangialardi, L., Bonsen, B., Tursi, C, and Veenhuizen, P. A., 2007, "CVT Dynamics: Theory and Experiments," Mech. Mach. Theory, 42(4), pp. 409-428.
18. Saito, T., 2007, "Simulation of Stress on Elements of CVT Metal Pushing V-Belt Under Transient Operating Conditions," Proceedings of the International Congress on Continuously Variable and Hybrid Transmissions, Yokohama, Japan, Paper No. 20074544.
19. Kanehara, S., Fujii, T., and Kitagawa, T., 1994, "A Study of a Metal Pushing V-Belt Type CVT\Part 3: What Forces Act on Metal Blocks?," SAE Paper No. 940735.
20. Micklem, J. D., Longmore, D. K., and Burrows, C. R., 1994, "Modelling of the Steel Pushing V-Belt Continuously Variable Transmission," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 208(1), pp. 13-27.
21. Srivastava, N., and Haque, I., 2008, "Clearance and Friction Induced Dynamics of Chain CVT Drives," Multibody Syst. Dyn., 19(3), pp. 255-280.
22. Sorge, F, 1996, "Influence of Pulley Bending on Metal V-Belt Mechanics," Proceedings of the International Conference on Continuously Variable Power Transmission, Yokohama, Japan, Sept. 11-12, Japanese Society of Automotive Engineers Paper No. 102 (9636268), pp. 9-15.
23. Sorge, F, 2008, "A Theoretical Approach to the Shift Mechanics of Rubber Belt Variators," ASME J. Mech. Des., 130(12), p. 122602.
24. Srnik, J., and Pfeiffer, F, 1999, "Dynamics of CVT Chain Drives," Int. J. Veh. Des., 22, pp. 54-72.
25. Carbone, G., Mangialardi, L., and Mantriota, G., 2001, "Theoretical Model of Metal V-Belt Drives During Rapid Ratio Changing," ASME J. Mech. Des., 123(1), pp. 111-117.
26. Carbone, G., Mangialardi, L., and Mantriota, G., 2002, "Influence of Clearance Between Plates in Metal Pushing V-Belt Dynamics," ASME J. Mech. Des., 124(3), pp. 543-557.
27. Fuji, T., Kurokawa, T., and Kanehara, S., 1993, "A Study of a Metal Pushing V-Belt Type CVT\Part 2: Compression Force Between Metal Blocks and Ring Tension," International Congress and Exposition, Detroit, MI, Mar. 1-5.
28. Asayama, H., Kawai, J., Tonohata, A., and Adachi, M., 1995, "Mechanism of Metal Pushing Belt," JSAE Rev., 16, pp. 137-143.
29. Yamaguchi, H., Tani, H., and Hayakawa, K., 2005, "Measurement and Estimation Technologies for the Experimental Analysis of Metal V-Belt Type CVTs," R&D Rev. Toyota CRDL, 40(3), pp. 21-29.
30. Kimura, M., 2005, "An Ultra-Small Sized Data-Logger System for High-Speed Rotational Measurements," R&D Rev. Toyota CRDL, 40(1), p. 57.
31. van Rooij, J., and Frank, A. A., 2002, "Development of a 700 Nm Chain CVT," Proceedings of the International Congress on Continuously Variable Transmission, Munich, Germany, VDI Berichte 1709, pp. 179-194.
32. Mascolo, G., 2008, "Progetto di un Amplificatore in Transimpedenza per Detector ad Alta Capacità," MS thesis, Politecnico di Bari, Bari, Italy.