Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 95, Issue 1, 2010, Pages 69-74

  May, Liliana Gressler ^a   Passos, Sheila Pestana ^a   Capelli, Diana Barca ^a   Özcan, Mutlu ^b   Bottino, Marco Antonio ^a   Valandro, Luiz Felipe ^c  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b Clinic for Masticatory Disorders and Complete Dentures   (Switzerland)

^c FEDERAL UNIVERSITY OF SANTA MARIA   (Brazil)

Author keywords

adhesion; bonding; coupling agents; resin cement; tribochemical treatment; Y TZP

Indexed keywords

ACRYLIC RESINS; BOND STRENGTH; BONDING DURABILITIES; CERAMIC SURFACE; CROSSHEAD SPEED; DIHYDROGEN PHOSPHATE; DISTILLED WATER; EXPERIMENTAL DESIGN; FOUR-GROUP; FREE SURFACES; ISO-PROPANOLS; RESIN CEMENT; RESIN-BOND; SHEAR BOND STRENGTHS; SILICA COATINGS; STORAGE CONDITION; SURFACE CONDITIONING; TETRAGONAL ZIRCONIA; TRIBOCHEMICAL TREATMENT; TRIMETHOXYSILANE; Y-TZP;

ADHESION; BOND STRENGTH (MATERIALS); CEMENTS; CERAMIC MATERIALS; COUPLING AGENTS; PHOSPHORIC ACID; RESINS; SHEAR STRENGTH; SILICA; SURFACE TESTING; YTTRIUM; YTTRIUM ALLOYS; ZIRCONIA;

COATINGS;

10 METHACRYLOYLOXYDECYL DIHYDROGEN PHOSPHATE; 2 PROPANOL; 3 METHACRYLOYLOXYPROPYL TRIMETHOXYSILANE; ACRYLIC ACID RESIN; BIOCERAMICS; ORGANOSILICON DERIVATIVE; PHOSPHATE; PHOSPHORIC ACID; RESIN CEMENT; SILICON DIOXIDE; UNCLASSIFIED DRUG; YTTRIA STABILIZED TETRAGONAL ZIRCONIA; ZIRCONIUM OXIDE;

ADHESION; ARTICLE; CONDITIONING; CONTROLLED STUDY; EXPERIMENTAL DESIGN; HUMAN; MATERIAL COATING; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PROSTHESIS;

COATED MATERIALS, BIOCOMPATIBLE; DENTAL BONDING; MATERIALS TESTING; METHACRYLATES; ORGANOPHOSPHORUS COMPOUNDS; RESIN CEMENTS; SILICON DIOXIDE; YTTRIUM; ZIRCONIUM;

EID: 78449270874     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31684     Document Type: Article

References (37)

1. Brentel AS, Özcan M, Valandro LF, Alarça LG, Amaral R, Bottino MA,. Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions. Dent Mater 2007; 23: 1323-1331.
2. Goia TS, Leite FP, Valandro LF, Özcan M, Bottino MA,. Repair bond strength of a resin composite to alumina-reinforced feldspathic ceramic. Int J Prosthodont 2006; 19: 400-402. (Pubitemid 44197797)
3. Güler AU, Yilmaz F, Ural C, Güler E,. Evaluation of 24-hour shear bond strength of resin composite to porcelain according to surface treatment. Int J Prosthodont 2005; 18: 156-160.
4. Rüttermann S, Fries L, Raab WH, Janda R,. The effect of different bonding techniques on ceramic/resin shear bond strength. J Adhes Dent 2008; 10: 197-203.
5. Özcan M, Vallittu PK,. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 2003; 19: 725-731.
6. Bottino MA, Valandro LF, Scotti R, Buso L,. Effect of surface treatments on the resin bond to zirconium-based ceramic. Int J Prosthodont 2005; 18: 60-65.
7. Wolfart M, Lehmann F, Wolfart S, Kern M,. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dental Mater 2007; 23: 45-50.
8. Oyagüe RC, Monticelli F, Toledano M, Osorio E, Ferrari M, Osorio R,. Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics Dent Mater 2009; 25: 392-399.
9. Kim BK, Hanna Eun-Kyung Bae HEK, Shim JS, Lee KW,. The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials. J Prosthet Dent 2005; 94: 357-362.
10. Papanagiotou HP, Morgano SM, Giordano RA, Pober R,. In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics. J Prosthet Dent 2006; 96: 154-164.
11. Zhang Y, Lawn BR, Rekow ED, Thompson VP,. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res 2004; 71B: 381-386.
12. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L,. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999; 15: 426-433.
13. Souza ROA, Bottino MA,. Influence of different air-particle-abrasion protocols on the biaxial flexural strength and on the structural stability of a yttria-stabilized tetragonal-zirconia-polycrystalline ceramic, Doctorate Thesis in Prosthodontics, São Paulo State University, Sao Jose dos Campos Dental School, Brazil, 2009. p 147.
14. Scherrer SS, Vittecoq E, Mestral F, Cattani-Lorente M, Wiskott A, and, Griggs JA,. Effect of CoJet sandblasting on fatigue data for Y-TZP ceramics. J Dent Res 2009; 88 (Spec Iss A):164 (IADR/AADR/CADR 87th General Session and Exhibition). .
15. Xible AA, Tavarez RRJT, Araujo CRPA, Bonachela WC,. Effect of silica coating and silanization on flexural and composite-resin bond strengths of zirconia posts: An in vitro study. J Prosthet Dent 2006; 95: 224-229.
16. Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS,. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 2006; 95: 430-436.
17. Blatz MB, Sadan A, Martin J, Lang B,. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004; 91: 356-362.
18. Özcan M, Kerkdijk S, Valandro LF,. Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only. Clin Oral Investig 2008; 12: 279-282.
19. Della Bona A, van Noort R., Shear VS,. Tensile bond strength of resin composite bonded to ceramic. J Dent Res 1995; 74: 1591-1596.
20. Valandro LF, Özcan M, Amaral R, Vanderlei A, Bottino MA,. Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: Microtensile versus shear test. Dent Mater J 2008; 27: 849-855.
21. Amaral R, Özcan M, Valandro LF, Balducci I, Bottino MA,. Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. J Biomed Mater Res Part B Appl Biomater 2008; 85B: 1-9.
22. Marom G,. The role of water transport in composite materials. In:, Comyn J, editor. Polymer Permeability. Great Britain: Elsevier Applied Science; 1985. pp 341-374.
23. Musto P, Ragosta G, Scarinza G, Mascia L,. Probing the molecular interactions in the diffusion of water through epoxy and epoxy-bismaleimide networks. J Polym Sci Part B Polym Phys 2002; 40: 922-938.
24. Blixt M, Adamczak E, Linden LA, Oden A, Arvidson K,. Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements. Int J Prosthodont 2000; 13: 221-226.
25. Matinlinna JP, Heikkinen T, Özcan M, Lassila LV, Vallittu PK,. Evaluation of resin adhesion to zirconia ceramic using some organosilanes. Dent Mater 2006; 22: 824-831.
26. Özcan M,. The use of chairside silica coating for different dental applications: A clinical report. J Prosthet Dent 2002; 87: 469-472.
27. Sun R, Suansuwan N, Kilpatrick N, Swain M,. Characterisation of tribo- chemically assisted bonding of composite resin to porcelain and metal. J Dent 2000; 28: 441-445.
28. Valandro LF, Della Bona A, Antonio Bottino M, Neisser MP,. The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic. J Prosthet Dent 2005; 93: 253-259.
29. Ernst CP, Cohnen U, Stender E, Willershausen B,. In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents. J Prosthet Dent 2005; 93: 551-558.
30. Della Bona A, Anusavice KJ, Hood JA,. Effect of ceramic surface treatment on tensile bond strength to a resin cement. Int J Prosthodont 2002; 15: 248-253.
31. Blatz MB, Sadan A, Kern M,. Resin-ceramic bonding: A review of the literature. J Prosthet Dent 2003; 89: 268-274.
32. Pace LL, Hummel SK, Marker VA, Bolouri A,. Comparison of the flexural strength of five adhesive resin cements. J Prosthodont 2007; 16: 18-24.
33. Lüthy H, Loeffel O, Hammerle CHF,. Effect of thermo cycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006; 22: 195-200.
34. Yang B, Barloi A, Kern M,. Influence of air abrasion on zirconia ceramic bonding using an adhesive composite resin. Dental Mater 2010; 26: 44-50.
35. Valandro LF, Özcan M, Bottino MC, Bottino MA, Scotti R, Bona AD,. Bond strength of resin cement to high-alumina and zirconia-reinforced ceramics: The effect of surface conditioning. J Adhes Dent 2006; 8: 175-181. (Pubitemid 44014526)
36. Kern M,. Resin bonding to oxide ceramics for dental restorations. J Adhes Sci Technol 2009; 23: 1097-1111.
37. Akgungor G, Sen D, Aydin M,. Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent 2008; 99: 388-399.