Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume

Fire Safety Journal

Volumn 45, Issue 6-8, 2010, Pages 385-391

  Demirel, Bahar ^a   Keleştemur, Oǧuzhan ^a  

^a FIRAT UNIVERSITY   (Turkey)

Author keywords

C S H gel; Concrete; Elevated temperature; Finely ground pumice; Silica fume

Indexed keywords

CEMENTS; COMPRESSIVE STRENGTH; CONCRETE ADDITIVES; CONCRETE MIXTURES; ELECTRIC FURNACES; PHYSICAL PROPERTIES; SCANNING ELECTRON MICROSCOPY;

C-S-H GEL; CONCRETE; CONCRETE SPECIMENS; ELEVATED TEMPERATURE; FINELY GROUND PUMOUSE; MECHANICAL AND PHYSICAL PROPERTIES; PROPERTIES OF CONCRETES; STRENGTH LOSS; ULTRASONIC PULSE VELOCITY; WEIGHT LOSS;

SILICA FUME;

EID: 77957861004     PISSN: 03797112     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.firesaf.2010.08.002     Document Type: Article

References (52)

1. S. Aydn Development of a high temperature-resistant mortar by using slag and pumice Fire Safety J. l 43 2008 610 617
2. O. Ariz Effects of elevated temperatures on properties of concrete Fire Safety J. 42 2007 516 522 (Pubitemid 47599866)
3. A.F. Bingl, and R. Gl Effects of elevated temperatures and cooling regimes on normal strength concrete Fire Mater. 33 2009 79 88
4. K.D. Hertz Concrete strength for fire safety design Mag. Concr. Res. 57 8 2005 445 453 (Pubitemid 41663688)
5. C.J. Zega, and A.A. Di Maio Recycled concrete exposed to high temperatures Mag. Concr. Res. 58 10 2006 675 682
6. S.Y.N. Chan, X. Luo, and W. Sun Effect of high temperature and cooling regimes on the compressive strength and pore properties of high performance concrete Const. Build. Mater. 14 2000 261 266 (Pubitemid 30587853)
7. J. Xiao, and H. Falkner On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures Fire Safety J. 41 2006 115 121 (Pubitemid 43243187)
8. S. Aydn, H. Yazc, and B. Baradan High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers Const. Build. Mater. 22 4 2008 504 512 (Pubitemid 351179264)
9. N.G. Zoldners, and H.S. Wilson Effect of sustained and cyclic temperature exposures on lightweight concrete ACI Pub. 39 9 1973 149 178
10. Y.N. Chan, X. Luo, and W. Sun The compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800 °C Cem. Concr. Res. 30 2000 247 251 (Pubitemid 30587853)
11. A. Lau, and M. Anson Effect of high temperatures on high performance steel fibre reinforced concrete Cem. Concr. Res. 36 2006 1698 1707 (Pubitemid 44402392)
12. C.S. Poon, Z.H. Shui, and L. Lam Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures Cem. Concr. Res. 34 12 2004 2215 2222
13. E. Sancak, Y.D. Sari, and O. Simsek Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and superplasticizer Cem. Concr. Comp. 30 2008 715 721
14. A.F. Bingl, and R. Gl Compressive strength of lightweight aggregate concrete exposed to high temperatures Indian J. Eng. Mater. Sci. 11 2004 68 72 (Pubitemid 39285268)
15. B. Chen, C. Li, and L. Chen Experimental study of mechanical properties of normal-strength concrete exposed to high temperatures at an early age Fire Safety J. 44 2009 997 1002
16. N. Yzer, F. Akz, and L. ztrk Dokuzer Compressive strength-color change relation in mortars at high temperature Cem. Concr. Res. 34 2004 1803 1807
17. M. Li, C. Qian, and W. Sun Mechanical properties of high strength concrete after fire Cem. Concr. Res. 34 2004 1001 1005
18. A.N. Noumowe, R. Siddique, and G. Debicki Permeability of high-performance concrete subjected to elevated temperature (600 °C) Const. Build. Mater. 23 2009 1855 1861
19. K.D. Hertz Limits of spalling of fire-exposed concrete Fire Safety J. 38 2003 103 116
20. K.D. Hertz, and L.S. S∅rensen Test method for spalling of fire exposed concrete Fire Safety J. 40 2005 466 476 (Pubitemid 40940880)
21. C. Poon, S. Azhal, M. Anson, and Y. Wong Comparison of the strength and durability performance of normal-and high-strength pozzolanic concretes at elevated temperatures Cem. Concr. Res. 31 2001 1291 1300 (Pubitemid 34096858)
22. S. Aydn, and B. Baradan Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars Cem. Concr. Res. 37 6 2007 988 995 (Pubitemid 46817543)
23. C. Poon, S. Azhal, M. Anson, and Y. Wong Performance of metakaolin concrete at elevated temperatures Cem. Concr. Comp. 25 2003 83 89 (Pubitemid 35350090)
24. R.M. Gutierrez, I.N. Diaz, and S. Delvasto Effect of pozzolans on the performance of fiber-reinforced mortars Cem. Concr. Comp. 27 2005 593 598 (Pubitemid 40357082)
25. J. Piasta Heat deformations of cement pastes phases and the microstructures of cement paste Mater. Struc. 17 102 1984 415 420 (Pubitemid 15476992)
26. B. Demirel, and S. Yazcolu Thermoelectric behavior of carbon fiber reinforced lightweight concrete with mineral admixtures New Carbon Mater. 23 1 2008 21 24
27. ACI 211.1. Standard practice for selecting proportions for normal, heavyweight and mass concrete, ACI Manual of Concrete Practice, 1993.
28. ASTM C39, Standard test method for compressive strength of cylindrical concrete specimens, Annual Book of ASTM Standards, 1994.
29. T. Gonen, and S. Yazicioglu The influence of mineral admixtures on the short and long-term performance of concrete Build. Env. 42 2007 3080 3085 (Pubitemid 46464489)
30. T. Gonen, and S. Yazicioglu The influence of compaction pores on sorptivity and carbonation of concrete Const. Build. Mater. 21 2007 1040 1045 (Pubitemid 44880679)
31. V.G. Papadikis, M.N. Fardis, and C.G. Veyenas Hydration and carbonation of pozzolanic cements ACI Mater. J. 89 2 1992 119 130
32. J.A. Rossignolo, and M.V. Agnesini Durability of polymer-modified lightweight aggregate concrete Cem. Concr. Comp. 26 4 2004 375 380
33. A.M. Neville Properties of Concrete, Longman Scientific and Technical and Newyork 1995 John Wiley &Sons New York
34. C. Tasdemir Combined effects of mineral admixtures and curing conditions on the sorptivity coefficient of concrete Cem. Concr. Res. 33 2003 1637 1642
35. I. Turkmen Influence of different curing conditions on the physical and mechanical properties of concretes with admixtures of silica fume and blast furnace slag Mater. Letters 57 29 2003 4560 4569
36. K.M.A. Hossain Macro- and microstructural investigations on strength and durability of pumice concrete at high temperature J. Mater. Civil Eng. ASCE 18 4 2006 527 536
37. S.Y.N. Chan, G.F. Peng, and M. Anson Residual strength and pore structure of high-strength concrete and normal-strength concrete after exposure to high temperatures Cem. Concr. Compos 21 1 1999 23 27
38. H. Yang, Y. Lin, C. Hsiao, and J. Liu Evaluating residual compressive strength of concrete at elevated temperatures using ultrasonic pulse velocity Fire Safety J. 44 2009 121 130
39. G.T.G. Mohamedbhai Effect of exposure time and rates of heating and cooling on residual strength of heated concrete Mag. Concr. Res. 38 136 1986 151 158
40. P.K. Mehta Studies on blended portland cements containing Santorin Earth Cem. Concr. Res. 4 1981 507 518
41. K.M.A. Hossain Properties of volcanic pumice based cement and lightweight concrete Cem. Concr. Res. 34 2004 283 291
42. K.M.A. Hossain, Performance of volcanic ash concrete in marine environment, in: Proceedings of 24th OWICS Conference, 2526 August, Singapore, vol. XVIII, 1999, pp. 209214.
43. E.E. Berry, R.T. Hemmings, and B.J. Cornelius Mechanisms of hydration reactions in high volume fly ash pastes and mortars Cem. Concr. Comp. 12 1990 253 261
44. E.E. Berry, R.T. Hemmings, M.H. Zhang, B.J. Cornelius, and D.M. Golden Hydration in high-volume fly ash concrete binders ACI Mater. J. 91 1994 382 389
45. M. Mazloom, A.A. Ramezanianpour, and J.J. Brooks Effect of silica fume on mechanical properties of high-strength concrete Cem. Concr. Comp. 26 2004 347 357
46. A. Benhood, and H. Ziari Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures Cem. Concr. Comp. 30 2008 106 112
47. I. Janotka, and T. Nurnbergerova Effect of temperature on structural quality of the cement paste and high-strength concrete with silica fume Nucl. Eng. Des. 235 2005 2019 2032 (Pubitemid 41119176)
48. F. Akoz, N. Yuzer, and S. Koral The influence of high temperature on the physical and mechanical properties of ordinary portland cement and silica fume mortar Turk. Chamber Civil Eng. (Tech. J. Digest 95 6 1995 287 292 (Pubitemid 127052919)
49. K.D. Hertz Danish investigations on silica fume concretes at elevated temperatures ACI Mater. J. 89 4 1992 345 347
50. W.M. Lin, T.D. Lin, and L.J. Powers-Couche Microstructures of fire-damaged concrete ACI Mater. J. 93 3 1996 199 205
51. I.B. Topcu, and A. Demir Effect of fire and elevated temperatures on reinforced concrete structures Bull. Chamber Civil Eng. 16 2002 34 36
52. S.K. Handoo, S. Agarwal, and S.K. Agarwal Physicochemical, mineralogical, an morphological characteristics of concrete exposed to elevated temperatures Cem. Concr. Res. 32 2002 1009 1018 (Pubitemid 34614035)