Properties of volcanic pumice based cement and lightweight concrete

Cement and Concrete Research

Volumn 34, Issue 2, 2004, Pages 283-291

  Anwar Hossain, Khandaker M ^a  

^a RYERSON UNIVERSITY   (Canada)

Author keywords

Blended cement; Lightweight structural concrete; Shrinkage permeability; Strength; Volcanic pumice

Indexed keywords

ABRASIVES; ABSORPTION; CONCRETES; EARTHQUAKES; ELASTICITY; HAZARDS; PARTICLE SIZE ANALYSIS; POROSITY; SHRINKAGE; SOLIDIFICATION; STRENGTH OF MATERIALS; VOLCANOES;

BLENDED CEMENTS; LIGHTWEIGHT STRUCTURAL CONCRETE; SHRINKAGE-PERMEABILITY; VOLCANIC PUMICE;

CEMENTS;

EID: 0742289981     PISSN: 00088846     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconres.2003.08.004     Document Type: Article

References (53)

1. Nevile A.M. Properties of Concrete. 4th ed. 1995;Longman, Harlow, England.
2. Jackson N. Civil Engineering Materials. 3rd ed. 1983;Macmillan Press, Hong Kong.
3. Al-Ani M., Hughes B. Pulverized-fuel ash and its uses in concrete. Mag. Concr. Res. 41(147):1989;55-63.
4. Mehta P.K. Properties of blended cements made from rice husk ash. J. Am. Concr. Inst. 74:1979;440-442.
5. Swamy R.N. Cement Replacement Materials, Concrete Technology and Design. vol. 3:1986;Surrey Univ. Press, Great Britain.
6. Swamy R.N. New Concrete Materials, Concrete Technology and Design. vol. 2:1983;Surrey Univ. Press, Great Britain.
7. Berry E.E., Malhotra V.M. Fly ash for use in concrete - a critical review. J. Am. Concr. Inst. 77(8):1980;59-73.
8. Bilodeau A., Malhotra V.M. High volume fly ash system: the concrete solution for sustainable development. Compilation of papers, Three day CANMET/ACI Symposium on Sustainable Development of the Cement and Concrete Industry, October 21-23, Ottawa. 1998;193-214.
9. Hooton R.D. Canadian use of ground granulated blast-furnace slag as a supplementary cementing material for enhanced performance of concrete. Can. J. Civ. Eng. 27:2000;754-760.
10. ASTM C 612-97, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for use as a Mineral Admixture in Concrete, 1997.
11. ASTM C 989-95, Standard Specification for Blast Furnace Slag for Use in Concrete and Mortars, 1995.
12. ASTM C 1240-97, Standard Specification for Silica Fume for use as a Mineral Admixture in Hydraulic-Cement Concrete, Mortar and Grout, 1997.
13. Jamal A., Khalid A., Haque M.N., Khalid E. Lightweight concrete in hot coastal areas. Cem. Concr. Compos. 21(5-6):1999;453-458.
14. Nisnevich M. Improving lightweight concrete with bottom ash. Fuel Energy Abstr. 39(3):1998;191.
15. Glenn G.M., Gray G.M., Orts W.J., Wood D.W. Starch-based lightweight concrete: effect of starch source, processing method, and aggregate geometry. Ind. Crops Prod. 9(4):1999;133-144.
16. Kohono K., Okamoto T., Isikawa Y., Sibata T., Mori H. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete. Cem. Concr. Res. 29(4):1999;611-614.
17. Basri H.B., Mannan M.A., Zain M.F.M. Concrete using waste oil palm shells as aggregate. Cem. Concr. Res. 29(4):1999;619-622.
18. Ghavami K. Ultimate load behaviour of Bamboo-reinforced lightweight concrete beams. Cem. Concr. Compos. 17(4):1995;281-288.
19. Blong-Aislabe, The Impact of Volcanic Hazards at Rabaul, PNG, Institute of National Affairs, Paper No. 33, Papua New Guinea, 1988.
20. ASTM C330-00: Specification for lightweight aggregates for structural concrete, Annual Book of ASTM Standards, Philadelphia, USA.
21. Kostmatka S.H., Kerkhoff B., Panarese W.C., Macleod N.F., McGrath R.J. Design and control of concrete mixtures. 7th Canadian ed. Engineering Bulletin. vol. 101:2002;Cement Association of Canada, Ottawa, Ontario.
22. AS 1289.C6.1 Australian Standard. 1977;Standards Association of Australia, Sydney.
23. ASTM C136-01, Standard test method for sieve analysis of fine and coarse aggregate, Annual Book of ASTM Standards, Philadelphia, USA.
24. AS 2350.3 Australian Standard. 1980;Standards Association of Australia, Sydney.
25. AS 2350.6 Australian Standard. 1980;Standards Association of Australia, Sydney.
26. ASTM C 143-00, Standard test method for slump of hydraulic cement concrete, Annual Book of ASTM Standards, Philadelphia, USA.
27. ASTM C 231-97, Test method for air content for freshly mixed concrete by pressure method, Annual Book of ASTM Standards, Philadelphia, USA.
28. BS 1881. Part 116, Method for determination of compressive strength of concrete cubes, British Standard Institution, London.
29. ASTM C39-01: Standard test method for compressive strength of cylindrical concrete specimens, Annual Book of ASTM Standards, Philadelphia, USA.
30. ASTM C496-96, Standard test method for splitting tensile strength of cylindrical concrete specimens, Annual Book of ASTM Standards, Philadelphia, USA.
31. AS1012, Part 13, 1970, Australian Standard, Standards Association of Australia, Sydney, Australia.
32. ASTM C157-99, Standard test method for length change of hardened hydraulic cement, mortar, and concrete, Annual Book of ASTM Standards, Philadelphia, USA.
33. BS 1881, Part 5, Methods of testing hardened concrete for other than strength, British Standard Institution, London.
34. ASTM C 469-87a, Standard test method for static modulus of elasticity and Poisson's ratio of concrete in compression, Annual Book of ASTM Standards, Philadelphia, USA.
35. Bamforth P.B. In situ measurement of the effect of partial Portland cement replacement using either fly ash or ground granulated blast-furnace slag on the performance of mass concrete. Proc. Inst. Civ. Eng. 69(2):1980;777-800.
36. Hossain K.M.A. Performance of volcanic ash concrete in marine environment. Proceedings of 24th OWICS Conference, "21st Century Concrete and Structures", 25-26 August, Singapore. vol. XVIII:1999;209-214.
37. Shideler J.J. Lightweight aggregate concrete for structural use. J. Am. Concr. Inst. 54:1957;299-328.
38. CSA 23.3-94: Design of Concrete structures, Canadian Standard Association, http://www.csa.ca.
39. ACI 221R-89 ACI Committee 221 Report. 1989;American Concrete Institute, Farmington Hills, MI.
40. FIP FIP Manual of Lightweight Aggregate Concrete. 2nd ed. 1983;Surrey Univ. Press, London.
41. Mindess S., Young J.F. Concrete. 1981;Prentice-Hall, Englewood Cliffs, NJ.
42. Brandt A.M. Cement Based Composites: Materials, Mechanical Properties and Performance. 1995;E & FN SPON, London.
43. Carlson R.W. Drying shrinkage of concrete as affected by many factors. Proceedings of the 41st Annual Meeting of the ASTM, Philadelphia. vol. 38 (Part II):1938;419-440.
44. Whiting D. Permeability of selected concretes. Permeability of Concrete, SP108. 1989;195-222 American Concrete Institute, Farmington Hills, MI.
45. ACI Committee 301 Specifications for structural concrete for buildings. J. Am. Concr. Inst. 72(7):1975;361-362.
46. Browne R.D., Domone P.L. Permeability and fatigue properties of structural marine concrete at continental shelf depths. Proceedings of the International Conference on Underwater Construction Technology, April. 1975;39 University of Wales, College of Cardiff, Cardiff.
47. Orchard D.F. Concrete Technology. vol. 2:1979;Applied Science Publishers, London.
48. AS1317 Australian Standard. 1982;Standards Association of Australia, Sydney.
49. AS1315 Australian Standard. 1982;Standards Association of Australia, Sydney.
50. AS2350.8; Australian Standard, Standards Association of Australia, Sydney.
51. AS2350.9, Australian Standard, Standards Association of Australia, Sydney.
52. ASTM C618-91, Standard specification for fly ash and raw or calcined natural pozzolan for use as a mineral admixture in Portland cement concrete, Annual Book of ASTM Standards, Philadelphia, USA.
53. ASTM C595-00, Standard specification for blended hydraulic cements, Annual Book of ASTM Standards, Philadelphia, USA.