Development of a high-temperature-resistant mortar by using slag and pumice

Fire Safety Journal

Volumn 43, Issue 8, 2008, Pages 610-617

  Aydin, Serdar ^a  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

Author keywords

Granulated blast furnace slag; High temperature; Mechanical properties; Microstructure; Mortar; Pumice

Indexed keywords

BLAST FURNACES; COMPRESSIVE STRENGTH; MICROSTRUCTURE; SLAGS;

CEMENT-BASED; COMPRESSIVE AND FLEXURAL STRENGTHS; GRANULATED BLAST FURNACE SLAG; GRANULATED BLAST-FURNACE SLAGS; GROUND GRANULATED BLAST FURNACE SLAG; HIGH-TEMPERATURE RESISTANT; HIGHEST TEMPERATURE; MORTAR SPECIMENS; PUMOUSE; STRENGTH LOSS;

MORTAR;

EID: 52949149667     PISSN: 03797112     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.firesaf.2008.02.001     Document Type: Article

References (36)

1. Khoury G.A. Compressive strength of concrete at high temperatures: a reassessment. Mag. Concrete Res. 44 161 (1992) 291-309
2. Sarshar R., and Khoury G.A. Material and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperatures. Mag. Concrete Res. 45 162 (1993) 51-61
3. Mohamedbhai G.T.G. Effect of exposure time and rates of heating and cooling on residual strength of heated concrete. Mag. Concrete Res. 38 136 (1986) 151-158
4. Ahmed A.E., Al-Shaikh A.H., and Arafat T.I. Residual compressive and bond strength of limestone aggregate concrete subjected to elevated temperatures. Mag. Concrete Res. 44 161 (1992) 117-125
5. Piasta J. Heat deformations of cement pastes phases and the microstructures of cement paste. Mater. Struct. 17 102 (1984) 415-420
6. Lin W.M., Lin T.D., and Powers L.J. Microstructures of fire-damaged concrete. ACI Mater. J. 93 3 (1996) 199-205
7. Poon C.S., Azhar S., Anson M., and Wong Y.L. Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures. Cement Concrete Res. 31 9 (2001) 1291-1300
8. U. Diederichs, U.M. Jumppanen, V. Penttala, Behavior of high strength concrete at high temperatures, Report No. 92, Department of Structural Engineering, Helsinki University of Technology, 1989.
9. Sullivan P.J.E., and Sharshar R. Performance of concrete at elevated temperatures. Fire Technol. 28 3 (1992) 240-250
10. Xiaoa J., Xiea M., and Zhang C. Residual compressive behaviour of pre-heated high-performance concrete with blast-furnace-slag. Fire Saf. J. 41 (2006) 91-98
11. Mehta P.K., and Monterio P.J.M. Concrete-Microstructure, Properties, and Materials (1997), Indian Concrete Institute, Chennai
12. Neville A.M. Properties of Concrete (1995), Longman, New York
13. Shoaib M.M., Ahmed S.A., and Balaha M.M. Effect of fire and cooling mode on the properties of slag mortars. Cement Concrete Res. 31 11 (2001) 1533-1538
14. Türker P., Erdoǧdu K., and Erdoǧan B. Investigation of fire-exposed mortars with different types of aggregates. Cement Concrete World 6 31 (2001) 52-67
15. Hertz K.D. Concrete strength for fire safety design. Mag. Concrete Res. 57 8 (2005) 445-453
16. Nekrasov K.D., and Tarasova A. Heat Resistant Concrete of Portland Cement (1969), Structural Literature Publisher, Moscow (in Russian)
17. M. Muff, Brandbestandig Beton Basered Pa Moler (Fire resistant concrete based on mo-clay), M.Sc. Project, Institute of Building Design (now: Department of Civil Engineering, 1983, Technical University of Denmark, Lyngby).
18. Aydi{dotless}n S., and Baradan B. Yüksek Si{dotless}cakli{dotless}ǧa Dayani{dotless}kli{dotless} Harç Geliştirilmesi. TMMOB 5 (2003), Ulusal Beton Kongresi, Istanbul, Turkey pp. 452-460
19. Aydi{dotless}n S., and Baradan B. Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars. Cement Concrete Res. 37 6 (2007) 988-995
20. ASTM C305-99, Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency, Annual Book of ASTM Standards, vol. 04.01, 2002.
21. ASTM C230/C230-M-98, Standard specification for flow table for use in tests of hydraulic cement, Annual Book of ASTM Standards, vol. 04.01, 2002.
22. ASTM C348-97, Standard test method for flexural strength of hydraulic-cement mortars, Annual Book of ASTM Standards, vol. 04.01, 2002.
23. ASTM C349-97, Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure), Annual Book of ASTM Standards, vol. 04.01, 2002.
24. M.S. Abrams, Compressive strength of concrete at temperatures to 1600 F, Temperature and Concrete, ACI Publication SP25, vol. 28, 1971, pp. 33-58.
25. Poon C.S., Azhar S., Anson M., and Wong Y.L. Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures. Cement Concrete Res. 31 9 (2001) 1291-1300
26. Dias W.P.S., Khoury G.A., and Sullivan P.J.E. Mechanical properties of hardened cement paste exposed to temperatures up to 700 °C. ACI Mater. J. 87 2 (1990) 160-166
27. Hossain K.M.A. High strength blended cement concrete incorporating volcanic ash: performance at high temperatures. Cement Concrete Comp. 28 (2006) 535-545
28. Heikal M. Effect of temperature on the physico-mechanical and mineralogical properties of Homra pozzolanic cement pastes. Cement Concrete Res. 30 (2000) 1835-1839
29. H. Yazi{dotless}ci{dotless}, S. Türkel, B. Baradan, High temperature resistance of pumice mortar, cement and concrete technology in the 2000s, In: Second International Symposium, Istanbul, Turkey, 2000, pp. 457-464.
30. Harmathy T.Z., and Allen L.W. Thermal properties of selected masonry unit concretes. ACI J. Proc. 70 2 (1973) 132-142
31. Cruz C.R., and Gillen M. Thermal expansion of Portland cement paste, mortar and concrete at high temperatures. Fire Mater. 4 2 (1980) 66-70
32. Xu Y., Wong Y.L., Poon C.S., and Anson M. Impact of high temperature on PFA concrete. Cement Concrete Res. 31 (2001) 1065-1073
33. Li M., Qian C., and Sun W. Mechanical properties of high-strength concrete after fire. Cement Concrete Res. 34 (2004) 1001-1005
34. Cülfik M.S., and Özturan T. Effect of elevated temperatures on the residual mechanical properties of high-performance mortar. Cement Concrete Res. 32 5 (2002) 809-816
35. Xu Y., Wong Y.L., Poon C.S., and Anson M. Influence of PFA on cracking of concrete and cement paste after exposure to high temperatures. Cement Concrete Res. 33 12 (2005) 2009-2016
36. A. Altun, Effect of CA-cement content on properties of SiC based self-flowing castable, in: Forty-sixth International Colloquium on Refractories, Refractories for Industrials, Aachen, 2003, pp. 134-137.