Macro- and microstructural investigations on strength and durability of pumice concrete at high temperature

Journal of Materials in Civil Engineering

Volumn 18, Issue 4, 2006, Pages 527-536

  Anwar Hossain, Khandakar M ^a  

^a RYERSON UNIVERSITY   (Canada)

Author keywords

Concrete durability; Microstructure; Permeability; Porosity; Residual strength; Temperature effects

Indexed keywords

COMPRESSIVE STRENGTH; CONCRETES; DIFFERENTIAL SCANNING CALORIMETRY; DURABILITY; MICROHARDNESS; PERMEAMETERS (MECHANICAL PERMEABILITY); POROSIMETERS; RESIDUAL STRESSES; THERMAL EFFECTS;

CONCRETE DURABILITY; PUMUICE CONCRETE; RAPID CHLORIDE PERMEABILITY TEST; RESIDUAL STRENGTH;

ABRASIVES;

COMPRESSIVE STRENGTH; CONCRETE; DURABILITY; MICROSTRUCTURE; PERMEABILITY; POROSITY; PUMICE; RESIDUAL STRENGTH; TEMPERATURE EFFECT;

EID: 33746108089     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2006)18:4(527)     Document Type: Article

References (38)

1. Bazant, Z. P., and Kaplan, M. F. (1996). Concrete at high temperatures: Material properties and mathematical models, Longman, London.
2. Cao, H. T., Bucea, L., McPhee, D. E., and Christie, E. A. (1992). "Corrosion of steel in solutions and cement pastes." Corrosion of Steel Reinforcement in Concrete: Final Rep., Cement and Concrete Association of Australia, Melbourne, Australia.
3. Castillo, P., and Durrani, A. J. (1990). "Effect of transient high temperature on high strength concrete." ACI Mater. J.AMAJEF0889-325X, 87(1), 47-53.
4. Chan, S. Y. N., Peng, G. F., and Anson, M. (1996). "Comparison between high-strength and normal-strength concrete subjected to high temperature." Mater. Struct.MASTED1359-5997, 29(12), 616-619.
5. Chan, S. Y. N., Peng, G. F., and Anson, M. (1999). "Residual strength and pore structure of high-strength concrete and normal-strength concrete after exposure to high temperatures." Cem. Concr. Compos.CCOCEG0958-9465, 21(1), 23-27.
6. Chan, Y. N., Luo, X., and Sun, W. (2000). "Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800°C." Cem. Concr. Res.CCNRAI0008-884610.1016/S0008-8846(99)00240-9, 30(2), 247-251.
7. Crook, D. N., and Murray, M. J. (1970). "Regain of strength and firing of concrete." Mag. Concrete Res.MCORAV0024-9831, 22(72), 149-154.
8. Cruz, C. R., and Gilen, M. (1980). "Thermal expansion of Portland cement paste, mortar and concrete at high temperatures." Fire Mater.FMATDV0308-0501, 4(2), 66-70.
9. Diamond, S. (2000). "Mercury porosimetry: An inappropriate method for the measurement of pore size distributions in cement-based materials." Cem. Concr. Res.CCNRAI0008-8846, 33(10), 1517-1525.
10. Dias, D. P. S., Khoury, G. A., and Sullivan, P. J. E. (1990). "Mechanical properties of hardened cement paste exposed to temperatures up to 700°C (1,292°F)." ACI Mater. J.AMAJEF0889-325X, 87(2), 160-165.
11. Diederichs, U., Jumppanen, U. M., and Penttala, V. (1989). "Behavior of high strength concrete at high temperatures." Rep. No. 92, Dept. of Structural Engineering, Helsinki Univ. of Technology, Helsinki, Finland.
12. Ghosh, S., and Nasser, K. W. (1996). "Effects of high temperature and pressure on strength and elasticity of lignite fly ash and silica fume concrete." ACI Mater. J.AMAJEF0889-325X, 93(1), 51-60.
13. Hertz, K. D. (1992). "Danish investigations on silica fume concretes at elevated temperatures." ACI Mater. J.AMAJEF0889-325X, 89(4), 345-347.
14. Hossain, K. M. A. (1999a). "Properties of volcanic ash and pumice concrete." IABSE Rep. 80, Int. Association for Bridge and Structural Engineering, Zurich, Switzerland, 145-150.
15. Hossain, K. M. A. (1999b). "Performance of volcanic ash concrete in marine environment." Proc., 24th OWICS Conf., National Univ. of Singapore, Singapore, 209-214.
16. Hossain, K. M. A. (1999c). "Fire durability of light weight volcanic pumice concrete with special reference to thin walled filled sections." Proc., Durability of Building Material and Components 8, Canadian Institute for Scientific and Technical Information, Ottawa, 149-158.
17. Hossain, K. M. A. (2003a). "Blended cement using volcanic ash and pumice." Cem. Concr. Res.CCNRAI0008-884610.1016/ S0008-8846(03)00127-3, 33(10), 1601-1605.
18. Hossain, K. M. A. (2003b). "Effect of volcanic pumice on the corrosion resistance and chloride diffusivity of blended cement mortars." J. Adv. Concr. Tech., 1(1), 54-62.
19. Igarashi, S., Bentur, A., and Mindess, S. (1996). "Microhardness testing of cementitious materials." Adv. Cem. Based Mater.ACATE91065-735510.1016/1065-7355(96)00035-1, 4(2), 48-57.
20. Igarashi, S., and Kawamura, M. (1994). "Effects of a size in bundled fibers on the interfacial zone between the fibers and the cement paste matrix." Cem. Concr. Res.CCNRAI0008-8846, 24(4), 695-703.
21. Khoury, G. A. (1992). "Compressive strength of concrete at high temperatures: A reassessment." Mag. Concrete Res.MCORAV0024-9831, 44(161), 291-309.
22. Khoury, G. A., Grainger, B. N., and Sullivan, P. J. E. (1985). "Transient thermal strain of concrete: Literature review, conditions within specimen, and behavior of individual constituents." Mag. Concrete Res.MCORAV0024-9831, 37(132), 131-144.
23. Lin, W. M., Lin, T. D., and Powers-Couche, L. J. (1996). "Microstructures of fire-damaged concrete." ACI Mater. J.AMAJEF0889-325X, 93(3), 199-205.
24. Malhotra, H. L. (1956). "Effect of temperature on the compressive strength of concrete." Mag. Concrete Res.MCORAV0024-9831, 8(23), 85-94.
25. Mehta, P. K. (1999). "Advancements in concrete technology." Anim. Reprod. Sci.ZZZZZZ0378-4320, 96(4), 69-76.
26. Mohamedbhai, G. T. G. (1986). "Effect of exposure time and rates of heating and cooling on residual strength of heated concrete." Mag. Concrete Res.MCORAV0024-9831, 38(136), 151-158.
27. Nasser, K. W., and Marzouk, H. M. (1979). "Properties of mass concrete containing fly ash at high temperatures." ACI J.JACIAX0002-8061, 76(4), 537-551.
28. Ollivier, J. P., and Massat, M. (1996). "The effect of the transition zone on transfer properties of concrete." Interfacial transition zone in concrete: RILEM report II, J. C. Maso, ed., RILEM, Cachan Cedex, France, 117-131.
29. Petzold, A., and Rohr, M. (1970). Concrete for high temperatures, Maclare, London.
30. Phan, L. T. (1996). Fire performance of high strength concrete: A report of the state-of-the-art, Building and Fire Research Laboratory, National Institute of Standards and Technology, Gaithersburg, Md.
31. Piasta, J. (1984). "Heat deformations of cement phases and the microstructure of cement paste." Mater. Struct., 17(102), 415-420.
32. Poon, C.-S., Azhar, S., Anson, M., and Wong, Y.-U. (2001). "Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures." Cem. Concr. Res.CCNRAI0008-884610.1016/S0008-8846(01)00580-4, 31(9), 1291-1300.
33. Riley, M. A. (1991). "Possible new method for assessment of fire-damaged concrete." Mag. Concrete Res.MCORAV0024-9831, 43(155), 87-92.
34. Sanjayan, G., and Stocks, L. J. (1993). "Spalling of high-strength silica fume concrete in fire." ACI Mater. J.AMAJEF0889-325X, 90(2), 170-173.
35. Sarshar, R., and Khoury, G. A. (1993). "Material and environmental factors influencing the compressive strength of unsealed cement paste and concrete at high temperatures." Mag. Concrete Res.MCORAV0024-9831, 45(162), 51-61.
36. Schneider, S. (1988). "Concrete at high temperatures - A general review." Fire Saf. J.FSJODZ0379-7112, 13(1), 55-68.
37. Shah, S. P., and Ahmad, S. H. (1994). High-performance concretes and applications, Edward Arnold, London.
38. Washburn, E. W. (1921). "Note on a method of determining the distribution of pore sizes in a porous materials." Proc., National Academy of Sciences (PNAS) of the USA, 7(4), 115-116.