3.06 - Computational Damage Mechanics: Application to Metal Forming Simulation

Comprehensive Structural Integrity: Nine Volume Set

Volumn 1-9, Issue , 2003, Pages 321-376

  Saanouni, K ^a   Chaboche, J L ^a,b  

^a UNIVERSITÉ DE TECHNOLOGIE DE TROYES   (France)

^b ONERA   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85120445756     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B0-08-043749-4/03072-X     Document Type: Chapter

References (196)

1. A.K. Abdali, K. Benkrid and P. Bussy (1995) Numerical simulation of sheet cutting. S. Shen, P. Dawson (Eds) Numiform'95 MAB 807-813.
2. M. Ainsworth and J.T. Oden (1997) A posteriori error estimation in finite element analysis. Comp. Meth. Appl. Mech. Eng. 142 1-88.
3. N. Aravas (1986) The analysis of void growth that leads to central burst during extrusion. J. Mech. Phys. Solids 34 55-79.
4. I. Babuska and W.C. Rheinboldt (1978) A posteriori error estimates for finite element method. Int. J. Num. Meth. Eng. 12 1597-1615.
5. I. Babuska and W.C. Rheinboldt (1982) Computational error estimates and adaptive processes for some nonlinear structural problems. Comp. Meth. Appl. Mech. Eng. 34 895-937.
6. T.J. Baker (1989) Developments and trends in 3-D mesh generation. Appl. Num. Math. 5 275-304.
7. J.L. Bassani (2001) Incompatibility and a simple gradient theory of plasticity. J. Mech. Phys. Solids 49 1983-1996.
8. K.J. Bathe (1981) Finite Element Procedures in Engineering Analysis Englewood Cliffs, NJ: Prentice-Hall
9. Z.P. Bazant, T. Belytschko and T.P. Chang (1984) Continuum theory for strain softening. J. Eng. Mech. ASCE. 110 1666-1692.
10. A. Beaudoin, P. Dawson, K. Mathur, U. Kocks and D. Korzekwa (1994) Application of polycrystal plasticity to sheet forming. Comp. Meth. Appl. Mech. Eng. 117 49-70.
11. T. Belytschko and J.I. Lin (1987) A 3-D impact-penetration algorithm with erosion. Comp. Struct. 25 95-104.
12. T. Belytschko, W.K. Liu and B. Moran (2000) Nonlinear Finite Elements for Continua and Structures New York: Wiley
13. A. Benallal, R. Billardon and I. Doghri (1988) An integration algorithm and the corresponding consistent tangent operator for fully coupled elastoplastic and damage equations. Comm. Appl. Num. Methods 4 731-740.
14. A. Benallal and V. Tvergaard (1995) Nonlocal continuum effects on bifurcation in the plane strain tension-compression test. J. Mech. Phys. Solids 43 741-770.
15. B. Bennani and J. Oudin (1995) Backward extrusion of steels, effects of punch design on flow mode and void volume fraction. Int. J. Machine Tools Manuf. 35 903-911.
16. A.A. Benzerga, J. Besson and A. Pineau (1999) Coalescence-controlled anisotropic ductile fracture. J. Eng. Mater. Technol. 121 221-229.
17. F.M. Beremin (1981) Cavity formation from inclusions in ductile fracture of A508 steel. Metall. Trans. 12A 723-731.
18. J. Besson, G. Cailletaud, J. L. Chaboche and S. Forest, 2001, “Mécanique non linéaire des matériaux,” Hermes, Paris, pp. 143–216.
19. S. Bezzina and K. Saanouni (1996) Theoretical and numerical modeling of sheet metal shear cutting. J. Lu (Eds) Mat-Tech'96 Paris: ITT International 15-24.
20. H.G. Bock (1983) Recent advances in parameter identification techniques for ODE. P. Deuflhard, E. Hairer (Eds) Numerical Treatment of Inverse Problems Boston: Birkhauser
21. J. Bonet and R.D. Wood (1997) Nonlinear Continuum Mechanics for Finite Element Analysis Cambridge: Cambridge University Press
22. N. Bontcheva and R. Iankov (1991) Numerical investigation of the damage process in metal forming. Eng. Fract. Mech. 40 387-393.
23. H. Borouchaki, A. Cherouat, K. Saanouni and P. Laug (2002) Remaillage en grandes deformation. Application à la mise en forme de structures 2D. Rev. Euro. Elém. Finis 11(1), 57-79.
24. R. de Borst, A. Benallal and O. Heeres (1996) A gradient-enhanced damage approach to fracture. J. de Physique IV 6 491-502.
25. R. de Borst, M.G.D. Geers, R.H.J. Peerlings and A. Benallal (1998) Some remarks on gradient and nonlocal theories. G.Z. Voyiadijs, J.W. Ju, J.L. Chaboche (Eds) Damage Mechanics in Engineering Materials Oxford: Elsevier 223-236.
26. R. de Borst, J. Pamin and M.G.D. Geers (1999) On coupled gradient-dependent plasticity and damage theories with a view to localization analysis. Euro. J. Mech. A/Solids 18 939-962.
27. N. Boudeau and J.C. Gelin (1994) Prediction of the localized necking in 3D sheet metal forming processes from FE simulations. J. Mater. Proc. Technol. 45 229-235.
28. D. Brokken, W. Brekelmans and F. Baaijens (1998) Numerical modelling of the metal blanking process. J. Mater. Proc. Technol. 83 192-199.
29. M. Brunet, F. Sabourin and S. Mgnib-Touchal (1996) The prediction of necking and failure in 3D sheet forming analysis using damage variable. J. de Physique IV 6 473-482.
30. M. Brunet, F. Morestin and H. Walter (2001) Numerical analysis of failure in sheet metal forming with experimental validation. Rev. Euro. Elém. Finis 2-3-4 275-293.
31. H.D. Bui (1992) Introduction aux problèmes inverses en mécanique des matériaux Paris: Eyrolles
32. H.D. Bui and M. Tanaka (Eds) (1994) Inverse Problems in Engineering Mechanics Berlin, New York: Springer
33. G. Cailletaud and P. Pilvin, 1994, Identification and inverse problems related to material behaviour. In: “Proceedings of the 2nd International Symposium on Inverse Problems, Clamart, France, November 1994,” pp. 79–86.
34. J.L. Chaboche (1988) Continuum damage mechanics: Parts I and II. J. Appl. Mech. 55 59-72.
35. J.L. Chaboche and G. Cailletaud (1996) Integration methods for complex plastic constitutive equations. Comp. Meth. Appl. Mech. Eng. 133 125-155.
36. R. Charlier and A.M. Habraken (1990) Numerical modelisation of contact with friction phenomena by the finite element method. Comp. Geotech. 9 59-72.
37. A.B. Chaudhary and K.J. Bathe (1986) A solution method for static and dynamic analysis of 3-D contact problems with friction. Comp. Struct. 24 855-873.
38. W.H. Chen and P. Tsai (1986) Finite element analysis of elastodynamics sliding contact problems with friction. Comp. Struct. 22 925-938.
39. J.H. Cheng (1988) Automatic adaptive remeshing for finite element simulation of forming processes. Int. J. Num. Meth. Eng. 26 1-18.
40. A. Cherouat and K. Saanouni, 2003, Numerical simulation of sheet metal blanking process using a coupled finite elastoplastic damage modelling. Int. J. Form. Processes, accepted.
41. C. Chicone and J. Gerlach (1987) Identifiability of distributed parameters. H.W. Engl, C.W. Groetsch (Eds) Inverse and Ill-posed Problems Academic Press
42. C.L. Chow and T.J. Lu (1989) On evolution laws of anisotropic damage. Eng. Fract. Mech. 34(3), 679-701.
43. S.E. Clift (1992) Fracture in forming processes. P. Hartley, et al., (Eds) Numerical Modelling of Material Deformation Processes Berlin: Springer 406-418.
44. C. Comi (2001) A nonlocal model with tension and compression damage mechanisms. Euro. J. Mech. A/Solids 20 1-22.
45. C. Comi and A. Corigliano (1996) On uniqueness of the dynamic finite-step problem in gradient-dependent softening plasticity. Int. J. Solids Struct. 33 3881-3902.
46. C. Comi and U. Perego (1996) A generalized variable formulation for gradient dependent softening plasticity. Int. J. Num. Meth. Eng. 39 3731-3755.
47. T. Coupez, J.L. Chenot (1992) Large deformations and automatic remeshing. D.R.J. Owen, et al., (Eds) Computational Plasticity Swansea: Pineridge Press 1077-1088.
48. M.A. Crisfield (1991) Non-linear Finite Element Analysis of Solids and Structures vol. 1 Chichester: Wiley
49. M.A. Crisfield (1997) Non-linear Finite Element Analysis of Solids and Structures vol. 2 Chichester: Wiley
50. E. Cosserat and F. Cosserat (1909) Théorie des corps déformables Paris: Hermann
51. J.K. Dienes (1979) On the analysis of rotation and stress rate in deforming bodies. Acta Mech. 32 217-232.
52. I. Doghri (1993) Fully implicit integration and consistent tangent modulus in elasto-plasticity. Int. J. Num. Meth. Eng. 36 3915-3932.
53. I. Doghri (1995) Numerical implementation and analysis of a class of metal plasticity models coupled with ductile damage. Int. J. Num. Meth. Eng. 38 3403-3431.
54. M. Dyduch, S. Cescotto and A.M. Habraken (1995) Error estimates and indicators for adaptive analysis of bulk forming. D.R.J. Owen, E. Onate (Eds) Computational Plasticity. Fundamentals and Applications Swansea: Pineridge Press 1355-1367.
55. M. Dyduch, A.M. Habraken and S. Cescotto (1992) Automatic adaptive remeshing for numerical simulations of metal forming. Comp. Meth. Appl. Mech. Eng. 101 283-298.
56. A.C. Eringen (1972) On nonlocal elasticity. Int. J. Eng. Sci. 10 233-248.
57. A.C. Eringen (1981) On nonlocal plasticity. Int. J. Eng. Sci. 19 1461-1474.
58. H.D. Espinosa, P.D. Zavattieri and G.L. Emore (1998) Adaptive FEM computation of geometric and material nonlinearities with application to brittle failure. Mech. Mater. 29 275-305.
59. EuroMech Colloquium 378, 1998, “Nonlocal Aspects in Solid Mechanics,” Mulhouse, France (abstracts).
60. EuroMech Colloquium 417, 2001, “NUMEDAM'00: Numerical Modelling in Damage Mechanics, Troyes, France, 2000,” ed. K. Saanouni, Special issue of Rev. Euro. Elém. Finis, vol. 10(2-3-4).
61. C. Faciu, A. Molinari, M. Dablij and A. Zeghloul (1998) A new rate-type gradient-dependent viscoplastic approach for stop-and-go strain band propagation. J. Phys. IV 8 143-150.
62. F. Faura, A. Garcia and M. Estrems (1998) Finite element analysis of optimum clearance in the blanking process. J. Mater. Proc. Technol. 80–81 121-125.
63. N.A. Fleck and J.W. Hutchinson (1997) Strain gradient plasticity. Adv. Appl. Mech. 33 296-361.
64. N.A. Fleck, G.M. Muller, M.F. Ashby and J.W. Hutchinson (1994) Strain gradient plasticity: theory and experiment. Acta Metall. Mater. 42 475-487.
65. L. Fourment and J.L. Chenot (1994) Adaptive remeshing and error control for forming processes. Rev. Euro. Elém. Finis 3(2), 247-279.
66. D. François, A. Pineau and A. Zaoui, 1993, “Comportement mécanique des matériaux. Volume 2: Endommagement, Mécanique de la rupture, Mécanique du contact,” Hermes, Paris.
67. M. Fremond and B. Nedjar (1996) Damage, gradient of damage and principle of virtual power. Int. J. Solids Struct. 33(8), 1083-1103.
68. L. Gallimard, P. Ladevèze and J.P. Pelle (1996) Error estimation and adaptivity in elestoplasticity. Int. J. Num. Meth. Eng. 39 189-217.
69. J.F. Ganghoffer and R. de Borst (2000) A new framework in nonlocal mechanics. Int. J. Eng. Sci. 38 453-486.
70. J.F. Ganghoffer, L.J. Sluys and R. de Borst (1999) A reappraisal of nonlocal mechanics. Eur. J. Mech. A Solids 18 17-46.
71. M. Garajeu, J.C. Michel and P. Suquet (2000) A micromechanical approach of damage in viscoplastic materials by evolution in size, shape and distribution of voids. Comp. Meth. Appl. Mech. Eng. 183 223-246.
72. M. Garajeu and P. Suquet (1997) Effective properties of porous ideally plastic or viscoplastic materials containing rigid particles. J. Mech. Phys. Solids 45 873-902.
73. M.G.D. Geers, R. de Borst, W.A.M. Brekelmans and R.H.J. Peerlings (1998) Strain-based transient-gradient damage model for failure analysis. Comp. Meth. Appl. Mech. Eng. 160 133-153.
74. J.C. Gelin (1990) Finite element analysis of ductile fracture and defects formations in cold and hot forging. Ann. CIRP 39 215-218.
75. J.C. Gelin, J. Oudin and Y. Ravalard (1985) An improved FEM for the analysis of the damage and ductile fracture in cold metal forming processes. Ann. CIRP 34(1), 209-213.
76. J.C. Gelin, M. Predeleanu (1989) Finite elasto-plasticity including damage—application to metal forming processes. E.G. Thompson, et al., (Eds) Numerical Methods in Industrial Forming Processes A. A. Balkama 425-430.
77. P.L. George (1991) Automatic Mesh Generation. Application to Finite Element Methods Chichester: Wiley
78. P.L. George and H. Borouchaki (1997) Triangulation de Delauney et maillage. Application à la méthode des éléments finis Paris: Hermes
79. P. Germain (1973) Cours de Mécanique des milieux continus Paris: Masson
80. P. Germain, Q.S. Nguyen and P. Suquet (1983) Continuum thermodynamics. J. Appl. Mech. 50 1010-1020.
81. M. Gologanu, J.B. Leblond and J. Devaux (1993) Approximate models for ductile metals containing non spherical voids—case of axisymmetric prolate ellipsoidal cavities. J. Mech. Phys. Solids 41 1723-1724.
82. M. Gologanu, J.B. Leblond and J. Devaux (1994) Approximate models for ductile metals containing non-spherical voids. Case of axisymmetric oblate ellipsoidal cavities. J. Eng. Mater. Technol. 116 290-297.
83. A.E. Green and R.S. Rivlin (1964) Multipolar continuum mechanics. Arch. Rat. Mech. Anal. 17 113-147.
84. A.L. Gurson (1977) Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol. 99 2-15.
85. A.M. Habraken and S. Cescotto (1990) An automatic remeshing technique for finite element simulation of forming processes. Int. J. Num. Meth. Eng. 30(8), 1503-1525.
86. J.O. Hallquist, G.L. Goudreau and D.J. Benson (1985) Sliding interfaces with contact-impact in large-scale Lagrangian computations. Comp. Meth. Appl. Mech. Eng. 51 107-137.
87. R. Hambli (2001) Finite element model fracture prediction during sheet-metal blanking processes. Eng. Fract. Mech. 68 365-378.
88. Y. Hammi, 2000, Simulation numérique de l'endommagement dans les procédés de misen en forme. Ph.D. thesis, University of Technology of Troyes, France.
89. P. Hartley, S.E. Clift, J. Salimi-Namin, C.E.N. Sturgess and I. Pillinger (1989) The prediction of ductile fracture initiation in metalforming using a finite element method and various fracture criteria. Res. Mech. 28 269-293.
90. S. Hartmann and P. Haupt (1993) Stress computation and consistent tangent operator using nonlinear kinematic hardening models. Int. J. Num. Meth. Eng. 36 3801-3814.
91. K. Havner (1992) Finite Plastic Deformation of Crystalline Solids 1st edn. Cambridge: Cambridge University Press
92. H.D. Hibbitt, R.V. Marcal and J.R. Rice (1970) A finite element formulation for problems of large strain and large displacement. Int. J. Solids Struct. 6 1069-1086.
93. R. Hill (1971) Mathematical Theory of Plasticity London: Oxford University Press
94. M. Homsi, L. Morançay and J.M. Roelandt (1996) Remeshing processes applied to the simulation of metal cutting. Rev. Euro. Elém. Finis 5 297-321.
95. T. J. R. Hughes, 1983, Analysis on transient algorithms with particular emphasis on stability behavior. In: “Computational Methods for Transient Analysis,” eds. T. Belytschko and T. J. R. Hughes, North-Holland, Amsterdam, pp. 67–155.
96. T.J.R. Hughes (1987) The Finite Element Method Englewood Cliffs, NJ: Prentice-Hall
97. T.J.R. Hughes, R.L. Taylor, J.L. Sackman, A.C. Curnier and W. Kanoknukuchai (1976) A finite element method for a class of contact-impact problems. Comp. Meth. Appl. Eng. 8 249-276.
98. T.J.R. Hughes and J. Winget (1980) Finite rotation effects in numerical integration of rate constitutive equations arising in large deformation analysis. Int. J. Num. Meth. Eng. 15 1862-1867.
99. M. Jirasek (1998) Nonlocal models for damage and fracture: comparison of approaches. Int. J. Solids Struct. 35(31–32), 4133-4145.
100. G. Johnson and D.J. Bamman (1984) A discussion of stress rates in finite deformation problems. Int. J. Solids Struct. 20 725-737.
101. JMTA, 1988, Special issue, Journal de Mécanique Théorique et Appliquée, No. 1, vol. 7.
102. S. Kalidindi and L. Anand (1994) Macroscopic shape change and evolution of crystallographic texture in pre-textured FCC metals. J. Mech. Phys. Solids 42 459-490.
103. S. Kalidindi, C. Bronkhorst and L. Anand (1992) Crystallographic texture evolution in bulk deformation processing of FCC metals. J. Mech. Phys. Solids 40 537-569.
104. P.I. Kattan and G.Z. Voyiadjis (2002) Damage Mechanics with Finite Elements Practical Applications with Computer Tools Berlin, New York: Springer
105. A.S. Khan and S. Huang (1995) Continuum Theory of Plasticity New York: Wiley
106. M. Kleiber (1989) Incremental Finite Element Modelling in Non-linear Solid Mechanics Chichester: Ellis Horwood
107. M. Kojic and K.J. Bathe (1987) The effective-stress-function algorithm for thermo-elasto-plasticity and creep. Int. J. Num. Meth. Eng. 24 1509-1532.
108. D. Krajcinovic (1984) Continuum damage Mechanics. Appl. Mech. Rev. 37(1), 1-6.
109. P. Ladevèze and J.T. Oden (1998) Advances in Adaptive Computational Methods in Mechanics Amsterdam: Elsevier
110. P. Ladevèze and J.P. Pelle (2001) La maîtrise du calcul en mécanique linéaire et non lineaire Paris: Hermes-Lavoisier
111. J.B. Leblond, G. Perrin and J. Devaux (1994) Bifurcation effects in ductile metals with local damage. ASME J. Appl. Mech. 61 236-242.
112. J.B. Leblond, G. Perrin and J. Devaux (1995) An improved Gurson-type model for hardenable ductile metals. Euro. J. Mech., A/Solids 14(4), 499-527.
113. E.H. Lee (1971) Elastic plastic deformation at finite strains. J. Appl. Mech. 36 276-279.
114. H. Lee, K.E. Peng and J. Wang (1985) An anisotropic damage criterion for deformation instability and its application to forming limit analysis of metal plates. Eng. Fract. Mech. 21(5), 1031-1054.
115. J. Lemaitre (1992) A course on Damage Mechanics Berlin: Springer
116. J. Lemaitre and J.L. Chaboche (1990) Mechanics of Solid Materials Cambridge: Cambridge University Press
117. X. Li and S. Cescotto (1997) A mixed element method in gradient plasticity for pressure dependent materials and modelling of strain localization. Comp. Meth. Appl. Mech. Eng. 144 287-305.
118. T.S. Liu and N.L. Chung (1990) Extrusion analysis and workability prediction using finite element method. Comp. Struct. 36 369-377.
119. E. Lorentz and S. Andrieux (1999) A variational formulation for nonlocal damage models. Int. J. Plasticity 15 119-138.
120. R. Mahnken and E. Kuhl (1999) Parameter identification of gradient enhanced damage models with the finite element method. Euro. J. Mech. A/Solids 18 819-835.
121. R. Mahnken and E. Stein (1994) The identification of parameter for visco-plastic models via FEM and gradient-methods. Modell. Simulation Mater. Sci. Eng. 2 597-616.
122. J. Mandel (1973) Equations constitutives et directeurs dans les milieuc plastiques et viscoplastiques. Int. J. Solids Struct. 9 725-740.
123. J. F. Mariage and K. Saanouni, 2001, “Simulation numérique de l'endommagement en Forgeage estampage,” Report UTT/LASMIS/01, November 2001.
124. K.K. Mathur and P. Dawson (1987) Damage evolution modeling in bulk forming processes. M. Predeleanu (Eds) Computational Methods for Predicting Material Processing Defects Amsterdam: Elsevier 251-262.
125. K.K. Mathur and P. Dawson (1989) On modeling the development of crystallographic texture in bulk forming processes. Int. J. Plasticity 5 67-94.
126. J. Mazars and Z.P. Bazant (Eds) (1989) Cracking and Damage. Strain Localization and Size Effect NY: Elsevier
127. P.B. Mellor (1977) Forming of anisotropic sheet metal. H. Lippman (Eds) Engineering Plasticity: Theory of Metal Forming Processes vol. 1 New York: Springer 67146.
128. A. Menzel and P. Steinmann (2000) On the continuum formulation of higher gradient plasticity for single and polycrystals. J. Mech. Phys. Solids 48 1777-1796.
129. E.D. Mielnick (1991) Metalworking Science and Engineering NY: McGraw-Hill
130. R.D. Mindlin (1965) Second gradient of strain and surface tension in linear elasticity. Int. J. Solids Struct. 1 417-437.
131. Z. Mroz and A. Seweryn (1998) Nonlocal failure and damage evolution rule: application to a dilatant crack model. J. Phys. IV 8 257-268.
132. S. Munhoven, A.M. Habraken, J. Winters, R. Schouwenaars and P. Van Houte (1995) Application of an anisotropic yield locus based on texture to a deep drawing simulation. S. Shen, P. Dawson (Eds) NUMIFORM: Simulation of Material Processing: Theory, Methods and Applications, June 1995 A. A. Balkama 767-772.
133. T. Mura (1987) Micromechanics of Defects in Solids 2nd edn. Dordrecht: Martinus Nijhoff Publishers
134. J.C. Nagteggal (1982) On the implementation of inelastic constitutive equations with special reference to large deformation problems. Comp. Meth. Appl. Mech. Eng. 33 469-484.
135. E. Nakamachi and X. Dong (1996) Elastic/crystalline viscoplastic FEA of dynamic deformation of sheet metal. Int. J. Computer-aided Eng. Software 13 308-326.
136. E. Nakamachi and X. Dong (1997) Study of texture effect on sheet failure in a limit dome height test by using elastic/crystalline viscoplastic FEA. J. Appl. Mech. 64 519-524.
137. S. Nemat-Nasser and M. Hori (1993) Micromechanics: Overall Properties of Heterogeneous Materials Amsterdam: North-Holland
138. K. Nesnas and K. Saanouni (2002) An integral formulation of coupled damage and viscoplastic constitutive equations. Formulation and computational issues. Int. J. Damage Mech. 11 367-397.
139. C. Nilsson (1997) Nonlocal strain softening bar revisited. Int. J. Solids Struct. 34 4399-4419.
140. J.T. Oden (1972) Finite Elements of Nonlinear Continua New York: McGraw-Hill
141. E. Onate, M. Kleiber and C.A. de Saracibar (1988) Plastic and viscoplastic flow of void containing metal—applications to axisymmetric sheet forming problem. Int. J. Num. Meth. Eng. 25 227-251.
142. D.R.J. Owen and E. Hinton (1980) Finite Elements in Plasticity, Theory and Practice Swansea: Pineridge Press
143. R.H.J. Peerlings, M.G.D. Geers, R. de Borst and W.A.M. Brekelmans (2001) A critical comparison of nonlocal and gradient-enhanced softening continua. Int. J. Solids Struct. 38 7723-7746.
144. P. Picart, O. Ghouati and J.C. Gelin (1998) Optimization of metal forming process parameters with damage minimization. J. Mater. Proc. Technol. 80–81 597-601.
145. G. Pijaudier-Cabot and Z.P. Bazant (1987) Nonlocal damage theory. ASCE J. Eng. Mech. 113 1512-1533.
146. G. Pijaudier-Cabot and A. Benallal (1993) Strain localization and bifurcation in nonlocal continuum. Int. J. Solids Strcut. 30 1761-1775.
147. C. Polizzotto, G. Borino and P. Fuschi (1998) A thermodynamically consistent formulation of nonlocal and gradient plasticity. Mech. Res. Com. 25 75-82.
148. P. Ponte Castaneda and M. Zaidman (1994) Constitutive models for porous materials with evolving microstructure. J. Mech. Phys. Solids 42 1459-1497.
149. D. Raabe (1998) Computational Materials Science Weinheim: Wiley-VCH
150. E. Riks (1978) The application of Newton's method to the problem of elastic stability. J. Appl. Mech. 39 1060-1066.
151. A. Rodriguez-Ferran, I. Erbos and A. Huerta (2001) Adaptive analysis based on error estimation for nonlocaldamage models. Rev. Euro. Elém. Finis 2-3-4 193-207.
152. A. Rodriguez-Ferran and A. Huerta (2000) Error estimation and adaptivity for non-local damage models. Int. J. Solids Struct. 37 7501-7528.
153. G. Rousselier (1987) Ductile fracture models and their potential in local approach of fracture. Nucl. Eng. Des. 105 97-111.
154. K. Saanouni, J.L. Chaboche and C. Bathias (1986) On the creep crack growth prediction by a local approach. Eng. Fract. Mech. 25(5/6), 677-691.
155. K. Saanouni, J.L. Chaboche and P.M. Lesne (1989) On the creep crack-growth prediction by a non local damage formulation. Euro. J. Mech. A/Solids 8(6), 437-459.
156. K. Saanouni, A. Cherouat and Y. Hammi (2001) Numerical aspects of finite elastoplasticity with isotropic ductile damage for metal forming. Rev. Euro. Elém. Finis 2-3-4 327-351.
157. K. Saanouni, A. Cherouat and Y. Hammi, 2001b, Optimization of hydroforming processes with respect to fracture. In: “4th Esaform Conference on Material Forming, Liège, Belgium, April 23–25, 2001,” ed. A. M. Habraken, vol. 1, pp. 361–364.
158. K. Saanouni, A. Cherouat, J. F. Mariage and K. Nesnas, 2001c, On the numerical simulation of 3D forging of some complex parts considering the damage occurrence. In: “4th Esaform Conference on Material Forming, Liège, Belgium, April 23–25, 2001,” ed. A. M. Habraken, vol. 2, pp. 593–597.
159. K. Saanouni, C. Forster and F. Ben Hatira (1994) On the anelastic flow with damage. Int. J. Damage Mech. 3 140-169.
160. K. Saanouni and Y. Franqueville, 1999, Numerical prediction of damage during metal forming processes. Numisheet 99, Besançon, September 1999, pp. 13–17.
161. K. Saanouni and Y. Hammi (2000) Numerical simulation of damage in metal forming processes. A. Benallal (Eds) Continuous Damage and Fracture Paris: Elsevier 353-363.
162. K. Saanouni and P. M. Lesne, 1987, Non-local damage model for creep crack-growth prediction. In: “Proceedings of the MECAMAT International Seminar on High Temerature Fracture Mechanisms and Mechanics, Dourdan, France, October 1989,” eds. P. Bensoussan and J. P. Mascarell, EGF Publication 6, MEP, London, pp. 449–466.
163. K. Saanouni, K. Nesnas and Y. Hammi (2000) Damage modeling in metal forming processes. Int. J. Damage Mech. 9 196-240.
164. M. Samuel (1998) FEM simulations and experimental analysis of parameters of influence in the blanking process. J. Mater. Proc. Technol. 84 97-106.
165. F. Sidoroff (1973) The geometrical concept of intermediate configuration and elastic–plastic finite strain. Arch. Mech. 25 299-308.
166. J.C. Simo and T.J.R. Hughes (1998) Computational Inelasticity New York: Springer
167. J.C. Simo and J.W. Ju (1987) Strain and stress-based continuum damage models: II. Computational aspects. Int. J. Solids Struct. 23 841-869.
168. J.C. Simo and T.A. Laursen (1993) An augmented Lagrangian treatment of contact problems involving friction. Comp. Struct. 42(1), 97-112.
169. J.C. Simo and R.L. Taylor (1985) Consistent tangent operators for rate independent elasto-plasticity. Comp. Meth. Appl. Mech. Eng. 48 101-118.
170. J.C. Simo and L. Vu-Quoc (1986) A 3-D finite strain rod model: Part ii. Computational aspects. Comp. Meth. Appl. Mech. Eng. 58 79-116.
171. P. Steinmann (1999) Formulation and computation of geometrically nonlinear gradient damage. Int. J. Num. Meth. Eng. 46 757-779.
172. L. Strömberg and M. Ristinmaa (1996) FE-formulation of a nonlocal plasticity theory. Comp. Meth. Appl. Mech. Eng. 136 127-144.
173. P. Suquet (1993) On bounds for the overall potential of power law materials containing voids with arbitrary shape. Mech. Res. Commun. 19 51-58.
174. T. Svedberg and K. Runesson (1997) A thermodynamically consistent theory of gradient-regularized plasticity coupled to damage. Int. J. Plasticity 13 669-696.
175. T. Svedberg and K. Runesson (1998) An algorithm for gradient-regularized plasticity coupled to damage based on a dual mixed FE-formulation. Comp. Meth. Appl. Mech. Eng. 161 49-65.
176. T. Svedberg and K. Runesson (2000) An adaptive finite element algorithm for gradient theory of plasticity with coupling to damage. Int. J. Solids Struct. 37 7481-7499.
177. D. Thuvesen and I. Rask, 1999, Simulation of product engineering process—tube hydroforming. In: “Numisheet'99, September 13–17, 1999, Besançon, France.”
178. R.A. Toupin (1962) Elastic materials with couple-stresses. Arch. Rat. Mech. Anal. 11 385-414.
179. C. Truesdell and W. Noll (1992) The Non-linear Field Theories of Mechanics 2nd edn. Berlin: Springer (1st edn., 1965)
180. V. Tvergaard (1990) Material failure by void growth to coalescence. Adv. Appl. Mech. 27 83-151.
181. V. Tvergaard and A. Needleman (1984) Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32 157-169.
182. J. van der Lugt and J. Huétink (1986) Thermal mechanically coupled finite element analysis in metal-forming processes. Comp. Meth. Appl. Mech. Eng. 54 145-160.
183. P. Villon, H. Borouchaki and K. Saanouni, 2000, Constrained interpolation based on plasticity criterion. In: “Proceedings of ECCOMAS, Barcelona, September 11–14, 2000,” CD-ROM paper no.: pdf.308.
184. G.Z. Voyiadjis and B. Deliktas (2000) A coupled anisotropic damage model for the inelastic response of composite materials. Comp. Meth. Appl. Mech. Eng. 183 159-199.
185. G.Z. Voyiadjis and P.I. Kattan (1999) Advances in Damage Mechanics: Metals and Metal Matrix Composites Amsterdam: Elsevier
186. J.H.P. de Vree, W.A.M. Brekelmans and M.A.J. van Gils (1995) Comparison of nonlocal approaches in continuum damage mechanics. Comp. Struct. 55(4), 581-588.
187. R.H. Wagoner and J.L. Chenot (1997) Fundamentals of Metal Forming USA: Wiley
188. K. P. Walker, 1987, A uniformly valid asymptotic integration algorithm for unified viscoplastic constitutive models. In: “Advances in Inelastic Analysis,” eds. S. Nakazawa et al., ASME, AMD vol. 88 and PED vol. 28, pp. 13–27.
189. H.T. Yang, M. Heinstein and J.M. Shih (1989) Adaptive 2D finite element simulation of metal forming processes. Int. J. Num. Meth. Eng. 28 1409-1428.
190. H. Zbib and E.C. Aifantis (1989) A gradient-dependent flow theory of plasticity: application to metal and soil instabilities. Appl. Mech. Rev. 42 295-304.
191. Y.Y. Zhu and S. Cescotto (1995) A fully coupled elasto-visco-plastic damage theory for anisotropic materials. Int. J. Solids Struct. 32(11), 1607-1641.
192. Y.Y. Zhu, S. Cescotto and A.M. Habraken (1992) A fully coupled elastoplastic damage modeling and fracture criteria in metal forming processes. J. Mater. Proc. Technol. 32 197-204.
193. O.C. Zienkiewicz, Y.C. Liu and G.C. Huang (1988) Error estimation and adaptivity in flow formulation for forming problems. Int. J. Num. Meth. Eng. 25 23-42.
194. O.C. Zienkiewicz, E. Onate and J.C. Heinrich (1981) A general formulation for coupled thermal flow of metals using finite elements. Int. J. Num. Meth. Eng. 17 1497-1514.
195. O. C. Zienkiewicz, R. L. Taylor, 1994, “The Finite Element Method,” 4th edn. McGraw-Hill, New York, vol. 1 and 2.
196. O.C. Zienkiewicz and J.Z. Zhu (1987) A simple arror estimator and adaptive procedure for practical engineering analysis. Int. J. Num. Meth. Eng. 24 337-357.