Passivity of 316L stainless steel in borate buffer solution studied by Mott-Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy

Corrosion Science

Volumn 52, Issue 11, 2010, Pages 3646-3653

  Feng, Zhicao ^a   Cheng, Xuequn ^a   Dong, Chaofang ^a   Xu, Lin ^a   Li, Xiaogang ^a  

^a UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING   (China)

Author keywords

A. Stainless steel; B. AAS; B. Electrochemical impedance spectroscopy; B. Mott Schottky plot; B. XPS

Indexed keywords

A. STAINLESS STEEL; B. AAS; B. ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; MOTT-SCHOTTKY PLOTS; XPS;

ABSORPTION; ABSORPTION SPECTROSCOPY; ATOMIC ABSORPTION SPECTROMETRY; ATOMIC SPECTROSCOPY; CORROSION RESISTANT ALLOYS; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; ELECTROCHEMICAL PROPERTIES; PASSIVATION; PHOTOELECTRICITY; PHOTONS; X RAY PHOTOELECTRON SPECTROSCOPY;

STAINLESS STEEL;

EID: 77956264367     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2010.07.013     Document Type: Article

References (67)

1. Nicic I., Macdonald D.D. The passivity of Type 316L stainless steel in borate buffer solution. J. Nucl. Mater. 2008, 379:54-58.
2. Turnbull A., Ryan M., Willetts A., et al. Corrosion and electrochemical behaviour of 316L stainless steel in acetic acid solutions. Corros. Sci. 2003, 45:1051-1072.
3. Kuczynska-Wydorska M., Flis J. Corrosion and passivation of low-temperature nitrided AISI 304L and 316L stainless steels in acidified sodium sulphate solution. Corros. Sci. 2008, 50:523-533.
4. Huang Y.Z., Titchmarsh J.M. TEM investigation of intergranular stress corrosion cracking for 316 stainless steel in PWR environment. Acta Mater. 2006, 54:635-641.
5. Lu Z., Shoji T., Takeda Y., et al. The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment. Corros. Sci. 2008, 50:698-712.
6. Xu S., Wu X.Q., Han E.H., et al. Cracking initiation mechanism for low cycle fatigue of type 316Ti stainless steel in high temperature water. Mater. Sci. Eng. A 2008, 490:16-25.
7. West E.A., Was G.S. IGSCC of grain boundary engineered 316L and 690 in supercritical water. J. Nucl. Mater. 2009, 392:264-271.
8. Fukuya K., Nishioka H., Fujii K., et al. Fracture behavior of austenitic stainless steels irradiated in PWR. J. Nucl. Mater. 2008, 378:211-219.
9. Da Cunha Belo M., Wakks M., Hakiki N.E., et al. Composition, structure and properties of the oxide films formed on the stainless steel 316L in a primary type PWR environment. Corros. Sci. 1998, 40:447-463.
10. 2-containing supercritical water. J. Supercrit. Fluids 2007, 42:157-163.
11. Vankeerberghen M., Weyns G., Gavrilov S., et al. Crack propagation rate modeling for 316 SS exposed to PWR-relevant conditions. J. Nucl. Mater. 2009, 384:274-285.
12. Shieu F.S., Deng M.J., Lin S.H. Microstructure and corrosion resistance of a type 316L stainless steel. Corros. Sci. 1998, 40:1267-1279.
13. Mottu N., Vayer M., Dudognon J., et al. Structure and composition effects on pitting corrosion resistance of austenitic stainless steel after molybdenum ion implanatation. Surf. Coat. Technol. 2005, 200:2131-2136.
14. Sun Y. Ehancement in corrosion resistance of austenitic stainless steels by surface alloying with nitrogen and carbon. Mater. Lett. 2005, 59:3410-3413.
15. Sun H., Wu X.Q. Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution. Corros. Sci. 2009, 51:2840-2847.
16. Ziemniak S.E., Hanson M. Corrosion behavior of 304 stainless steel in high temperature, hydrogenated water. Corros. Sci. 2002, 44:2209-2230.
17. Shintani D., Ishida T., Izumi H., et al. XPS studies on passive film formed on stainless steel in a high-temperature and high-pressure methanol solution containing chloride ions. Corros. Sci. 2008, 50:2840-2845.
18. Montemor M.F., Ferreira M.G.S. Chemical composition and electronic structure of the oxide films formed on 316L stainless steel and nickel based alloys in high temperature aqueous environments. Corros. Sci. 2000, 42:1635-1650.
19. Masuda H. SKFM observation of SCC on SUS 304 stainless steel. Corros. Sci. 2007, 49:120-129.
20. Nishimura R., Maeda Y. SCC evaluation of type 304 and 316 austenitic stainless steels in acidic chloride solutions using the slow strain rate technique. Corros. Sci. 2004, 46:769-785.
21. Nishimura R. Characterization and perspective of stress corrosion cracking of austenitic stainless steels (type 304 and type 316) in acid solutions using constant load method. Corros. Sci. 2007, 49:81-91.
22. Terachi T., Yamada T., Miyamoto T., et al. Corrosion behavior of stainless steel in simulated PWR primary water: effect of chromium content in alloys and dissolved hydrogen. J. Nucl. Sci. Technol. 2008, 45:975-984.
23. Carmezim M.J., Simoes A.M., Montemor M.F., et al. Capacitance behaviour of passive films on ferritic and austenitic stainless steel. Corros. Sci. 2005, 47:581-591.
24. Hakiki N.E., Montemor M.F., Ferreira M.G.S. Semiconducting properties of thermally grown oxide films on AISI 304 stainless steel. Corros. Sci. 2000, 42:687-702.
25. Sudesh T.L., Wijesinghe L., Blackwood D.J. Electrochemical and optical characterisation of passive films on stainless steels. J. Phys. 2006, 28:74-78.
26. Meng G.Z., Zhang C., Cheng Y.F. Effects of corrosion product deposit on the subsequent cathodic and anodic reactions of X-70 steel in near-neutral pH solution. Corros. Sci. 2008, 50:3116-3122.
27. Jang H.J., Kwon H.S. In situ study on the effects of Ni and Mo on the passive film formed on Fe-20Cr alloys by photoelectrochemical and Mott-Schottky techniques. J. Electroanal. Chem. 2006, 590:120-125.
28. Meng G.Z., Li Y., Wang F.H. The corrosion behavior of Fe-10Cr nanocrystalline coating. Electrochim. Acta 2006, 51:4277-4284.
29. Fujimoto S., Tsuchiya H. Semiconductor properties and protective role of passive films of iron base alloys. Corros. Sci. 2007, 49:195-202.
30. Lee J.B., Kim S.W. Semiconducting properties of passive films formed on Fe-Cr alloys using capacitance measurements and cyclic voltammetry techniques. Mater. Chem. Phys. 2007, 104:98-104.
31. Lin H.C., Lin K.M., Lin C.S., et al. The corrosion behavior of Fe-based shape memory alloys. Corros. Sci. 2002, 44:2013-2026.
32. Fattah-alhosseini A., Golozar M.A., Saatchi A., et al. Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels. Corros. Sci. 2010, 52:205-209.
33. Yang S.F., Macdonald D.D. Theoretical and experimental studies of the pitting of type 316L stainless steel in borate buffer solution containing nitrate ion. Electrochim. Acta 2007, 52:1871-1879.
34. Dan T.C., Shoji T., Lu Z.P., et al. Effects of hydrogen on the anodic behavior of Alloy 690 at 60°C. Corros. Sci. 2010, 52:1228-1236.
35. Huang J.B., Wu X.Q., Han E. Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments. Corros. Sci. 2009, 51:2976-2982.
36. Urquidi-Macdonald M., Real S., Macdonald D.D. Application of Kramers-Kronig transforms in the analysis of electrochemical impedance data. J. Electrochem. Soc. 1986, 133:2018-2024.
37. Shin H., Mansfeld F. Concerning the use of the Kramers-Kronig transforms for the validation of impedance data. Corros. Sci. 1988, 28:933-938.
38. Urquidi-Macdonald M., Real S., Macdonald D.D. Applications of Kramers-Kronig transforms in the analysis of electrochemical impedance data-III. Stability and linearity. Electrochim. Acta 1990, 35:1559-1566.
39. Akram M.S., Lomadze V. On some basics of linear systems theory. Systems Control Lett. 2009, 58:83-90.
40. Kramers H.A. La diffusion de la lumiere par les atomes. Atti del Congresso Internazinale dei Fisici, Como 1927, 2:545-557.
41. Kronig R.de L. On the theory of dispersion of X-rays. J. Opt. Soc. Am. 1926, 12:547-557.
42. Zaban A., Meier A., Gregg B.A. Electric potential distribution and short-range screening in nanoporous TiO electrodes. J. Phys. Chem. B 1997, 101:7985-7990.
43. Brug G.J., van den Eeden A.L.G., Sluyters-Rehbach M., et al. The analysis of electrode impedances complicated by the presence of a constant phase element. J. Electroanal. Chem. 1984, 176:275-295.
44. Sikora E., Sikora J., Macdonald D.D. A new method for estimating the diffusivities of vacancies in passive films. Eletrochim. Acta 1996, 41:783-789.
45. Simoes A.M.P., Ferrira M.G.S., Rondot B. Study of passive films formed on AISI 304 stainless steel by impedance measurements and photoelectrochemistry. J. Electrochem. Soc. 1990, 137:82-87.
46. Guo H.X., Lu B.T., Luo J.L. Non-Faraday material loss in flowing corrosive solution. Electrochim. Acta 2006, 51:5341-5348.
47. Vautrin-UI C., Taleb A., Stafiej J., et al. Mesoscopic modelling of corrosion phenomena: coupling between electrochemical and mechanical processes, analysis of the deviation from the Faraday law. Electrochim. Acta 2007, 52:5368-5376.
48. Morrison S.R. Electrochemistry at Semiconductor and Oxidized Metal Electrodes 1980, Plenum Press, New York.
49. 3 artificial passive films studied by in situ XANES. J. Electrochem. Soc. 1998, 145:791-801.
50. 3-NiO formed by metalorganic chemical vapor deposition. J. Electrochem. Soc. 1993, 140:1586-1592.
51. Ningshen S., Kamachi Mudali U., Mittal V.K., et al. Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels. Corros. Sci. 2007, 49:481-496.
52. Sunseri C., Piazza S., Quarto F.D. Photocurrent spectroscopic investigation of passive films on Chromium. J. Electrochem. Soc. 1990, 137:2411-2417.
53. Hakiki N.E., Boudin S., Rondot B., et al. The electronic structure of passive films formed on stainless steels. Corros. Sci. 1995, 37:1809-1822.
54. Azumi K., Ohtsuka T., Sato N. Mott-Schottky plot of the passive film formed on iron in neutral borate and phosphate solutions. J. Electrochem. Soc. 1987, 134:1352-1357.
55. Maximovitch S. Influence of formation conditions on impedance properties of nickel passive layers formed in 1M KOH. Electrochim. Acta 1996, 41:2761-2771.
56. Virtanen S., Buchler M. Electrochemical behaviour of surface films formed on Fe in chromate solutions. Corros. Sci. 2003, 45:1405-1419.
57. Wang B., Dong S. Electrochemical study of isopoly- and heteropoly-oxometallate film modified microelectrodes - parts 2. Electrochemical behaviour of isopolymolybdic acid monolayer modified carbon fibre microelectrodes. Electrochim. Acta 1992, 37:1859-1864.
58. Sakashita M., Sato N. The effects of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions. Corros. Sci. 1977, 17:473-486.
59. Searson P.C., Latanision R.M. A photoelectrochemical study of the passive film on chromium. Electrochim. Acta 1990, 35:445-450.
60. Sudesh T.L., Wijesinghe L., Blackwood D.J. Photocurrent and capacitance investigations into the nature of the passive films on austenitic stainless steels. Corros. Sci. 2008, 50:23-34.
61. Ye W., Li Y., Wang F.H. The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization. Electrochim. Acta 2009, 54:1339-1349.
62. Bojinov M., Fabricius G., Laitinen T., et al. Coupling between ionic defect structure and electronic conduction in passive films on iron, chromium and iron-chromium alloys. Electrochim. Acta 2000, 45:2029-2048.
63. Shirley D.A. High-resolution X-ray photoemission spectrum of the valence bands of gold. Phys. Rev. B 1972, 5:4709-4714.
64. Haupt S., Calinski C., Collisi U., et al. XPS and ISS examinations of electrode surface and passive layers with a specimen transfer in a closed system. Surf. Interf. Anal. 1986, 9:357-365.
65. Moulder J.F., William F.S., Peter E.S. Handbook of X-ray Photoelectron Spectroscopy 1992, Perkin-Elmer Corporation, USA.
66. 3 during the first hours of the catalytic oxidation of isonbutene to methacrolein. J. Mol. Catal. A: Chem. 2000, 155:59-71.
67. 3 system. J. Mol. Catal. A: Chem. 2009, 302:48-53.