A rotating bed system bioreactor enables cultivation of primary osteoblasts on well-characterized sponceram® regarding structural and flow properties

Biotechnology Progress

Volumn 26, Issue 3, 2010, Pages 671-678

  Suck, Kirstin ^a   Roeker, Stefanie ^a   Diederichs, Solvig ^a   Anton, Fabienne ^a   Sanz Herrera, Jose A ^b   Ochoa, Ignacio ^b   Doblare, Manuel ^b   Scheper, Thomas ^a   van Griensven, Martijn ^c   Kasper, Cornelia ^a  

^a LEIBNIZ UNIVERSITY HANNOVER   (Germany)

^b UNIVERSITY OF ZARAGOZA   (Spain)

^c LUDWIG BOLTZMANN INSTITUTE FOR EXPERIMENTAL AND CLINICAL TRAUMATOLOGY   (Austria)

Author keywords

Biomechanics; Primary osteoblasts; Rotating bed system; Sponceram ; Young's modulus

Indexed keywords

BIOREACTOR SYSTEM; BONE TISSUE ENGINEERING; FLOW CHARACTERISTIC; FLOW PROPERTIES; HIGH POROSITY; INTRINSIC PERMEABILITY; LINEAR RANGE; MECHANICAL REQUIREMENTS; MICROSTRUCTURAL DESIGN; POROUS CERAMICS; POROUS NETWORKS; ROTATING BED; STRESS-STRAIN TESTS; THREE-DIMENSIONAL STRUCTURE; TWO PLATES; WASTE REMOVAL; YOUNG'S MODULUS;

BIOCOMPATIBILITY; BIOCONVERSION; BIOLOGICAL MATERIALS; BIOMECHANICS; BIOREACTORS; ELASTIC MODULI; ELASTICITY; ROTATION; SOLVENTS; TISSUE ENGINEERING;

OSTEOBLASTS;

COLLAGEN; OSTEOPONTIN; TISSUE SCAFFOLD; ZIRCONIUM; ZIRCONIUM OXIDE; CERAMICS;

ADULT; ARTICLE; BIOMECHANICS; BIOREACTOR; CERAMICS; CHEMISTRY; CYTOLOGY; HUMAN; INSTRUMENTATION; MALE; MATERIALS TESTING; METABOLISM; METHODOLOGY; MICRO-COMPUTED TOMOGRAPHY; OSTEOBLAST; POROSITY; REVERSE TRANSCRIPTION POLYMERASE CHAIN REACTION; SCANNING ELECTRON MICROSCOPY; TISSUE CULTURE TECHNIQUE; TISSUE ENGINEERING; YOUNG MODULUS; DEVICES; PROCEDURES; TISSUE SCAFFOLD;

ADULT; BIOMECHANICS; BIOREACTORS; CERAMICS; COLLAGEN; ELASTIC MODULUS; HUMANS; MALE; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; OSTEOBLASTS; OSTEOPONTIN; POROSITY; REVERSE TRANSCRIPTASE POLYMERASE CHAIN REACTION; TISSUE CULTURE TECHNIQUES; TISSUE ENGINEERING; TISSUE SCAFFOLDS; X-RAY MICROTOMOGRAPHY; ZIRCONIUM; BIOMECHANICAL PHENOMENA;

EID: 77954702569     PISSN: 87567938     EISSN: 15206033     Source Type: Journal    
DOI: 10.1002/btpr.386     Document Type: Article

References (49)

1. Burg KJ, Porter S, Kellam JF. Biomaterial developments for bone tissue engineering. Biomaterials. 2000;21:2347-2359.
2. Kellomaki M, Niiranen H, Puumanen K, Ashammakhi N, Waris T, Tormala P. Bioabsorbable scaffolds for guided bone regeneration and generation. Biomaterials. 2000;21:2495-2505.
3. Hutmacher DW. Scaffolds in tissue engineering bone and cartilage. Biomaterials. 2000;21:2529-2543.
4. Temenoff JS, Mikos AG. Injectable biodegradable materials for orthopedic tissue engineering. Biomaterials. 2000;21:2405-2412.
5. Salgado AJ, Coutinho OP, Reis RL. Novel starch-based scaffolds for bone tissue engineering: cytotoxicity, cell culture, and protein expression. Tissue Eng. 2004;10:465-474.
6. Holmes TC. Novel peptide-based biomaterial scaffolds for tissue engineering. Trends Biotechnol. 2002;20:16-21.
7. Liebschner MA. Biomechanical considerations of animal models used in tissue engineering of bone. Biomaterials. 2004;25:1697-1714.
8. Sikavitsas VI, Temenoff JS, Mikos AG. Biomaterials and bone mechanotransduction. Biomaterials. 2001;22:2581-2593.
9. Ramay HR, Zhang M. Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering. Biomaterials. 2004;25:5171-5180.
10. Ignatius A, Blessing H, Liedert A, Schmidt C, Neidlinger-Wilke C, Kaspar D, Friemert B, Claes L. Tissue engineering of bone: effects of mechanical strain on osteoblastic cells in type I collagen matrices. Biomaterials. 2005;26:311-318.
11. Athanasiou KA, Zhu C, Lanctot DR, Agrawal CM, Wang X. Fundamentals of biomechanics in tissue engineering of bone. Tissue Eng. 2000;6:361-381.
12. Wilson CJ, Clegg RE, Leavesley DI, Pearcy MJ. Mediation of biomaterial-cell interactions by adsorbed proteins: a review. Tissue Eng. 2005;11:1-18.
13. Reddi AH. Role of morphogenetic proteins in skeletal tissue engineering and regeneration. Nat Biotechnol. 1998;16:247-252.
14. Alam MI, Asahina I, Ohmamiuda K, Takahashi K, Yokota S, Enomoto S. Evaluation of ceramics composed of different hydroxyapatite to tricalcium phosphate ratios as carriers for rhBMP-2. Biomaterials. 2001;22:1643-1651.
15. Discher DE, Janmey P, Wang YL. Tissue cells feel and respond to the stiffness of their substrate. Science. 2005;310:1139-1143.
16. Wong JY, Velasco A, Rajagopalan P, Pham Q. Directed movement of vascular smooth muscle cells on gradient-compliant hydrogels. Langmuir. 2003;19:1908-1913.
17. Pelham RJ, Wang Y. Cell locomotion and focal adhesions are regulated by substrate flexibility. Proc Natl Acad Sci USA. 1997;94:13661-13665.
18. Engler A, Bacakova L, Newman C, Hategan A, Griffin M, Discher D. Substrate compliance versus ligand density in cell on gel responses. Biophys J. 2004;86:617-628.
19. Lauffenburger DA, Horwitz AF. Cell migration: a physically integrated molecular process. Cell. 1996;84:359-369.
20. Ghosh K, Pan Z, Guan E, Ge S, Liu Y, Nakamura T, Ren X, Rafailovich M, Clark RAF. Cell adaptation to a physiologically relevant ecm mimic with different viscoelastic properties. Biomaterials. 2007;28:671-679.
21. Kitano H. Systems biology: a brief overview. Science. 2002; 295:1662-1664.
22. Suresh S. Biomechanics and biophysics of cancer cells. Acta Biomater. 2007;3:413-438.
23. Bischofs IB, Schwarz US. Cell organization in soft media due to active mechanosensing. Proc Natl Acad Sci USA. 2003;100:9274-9279.
24. Schwarz US, Erdmann T, Bischofs IB. Focal adhesions as mechanosensors: the two-spring model. Biosystems. 2006;83: 225-232.
25. Engler AJ, Sen S, Sweeney HL, Discher DE. Matrix elasticity directs stem cell lineage specification. Cell. 2007;126:677-689.
26. Jerome R, Maquet V. Design of macroporous biodegradable polymer scaffolds for cell transplantation. Mat Sci Forum. 1997; 250:15-42.
27. Ishaug-Riley SL, Crane-Kruger GM, Yaszemski MJ, Mikos AG. Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers. Biomaterials. 1998;19:1405-1412.
28. Brigido-Diego R, Mas-Estelles J, Sanz JA, Garcia-Aznar JM, Salmeron-Sanchez M. Polymer scaffolds with interconnected spherical pores and controlled architecture for tissue engineering. Fabrication, mechanical properties and finite element modeling. J Biomed Mater Res B. 2007;81:448-455.
29. Hollister SJ. Porous scaffold design for tissue engineering. Nat Mater. 2005;4:518-524.
30. Hollister SJ, Maddox RD, Taboas JM. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials. 2002;23:4095-4103.
31. Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials. 2005;26:5474-5491.
32. Shimko DA, Nauman EA. Development and characterization of a porous poly(methyl methacrylate) scaffold with controllable modulus and permeability. J Biomed Mater Res B. 2007;80: 360-369.
33. Swider P, Conroy M, Pedrono A, Ambard D, Mantell S, Soballe K, Bechtold JE. Use of high-resolution MRI for investigation of fluid flow and global permeability in a material with interconnected porosity. J Biomech. 2007;40:2112-2118.
34. Li S, de Wijn JR, Li J, Layrolle P, de Groot K. Macroporous biphasic calcium phosphate scaffold with high permeability/porosity ratio. Tissue Eng. 2003;9:535-548.
35. Shimko DA, Shimko VF, Sander EA, Dickson KF, Nauman EA. Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds. J Biomed Mater Res B. 2005;73:315-324.
36. Chor MV, Li W. A permeability measurement system for tissue engineering scaffolds. Meas Sci Technol. 2007;18:208-216.
37. Jaecques SV, van Oosterwyck H, Muraru L, van Cleynenbreugel T, de Smet E, Wevers M, Naert I, Vander Sloten J. Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone. Biomaterials. 2004;25:1683-1696.
38. Guilak F. Functional tissue engineering: the role of biomechanics in reparative medicine. Ann NY Acad Sci. 2002;961: 193-195.
39. El Haj A. Biomechanical interactions in tissue engineering and surgical repair (BITES). Med Biol Eng Comput. 2004;42:2.
40. Beaudoin AJ, Mihalko WM, Krause WR. Finite element modelling of polymethylmethacrylate flow through cancellous bone. J Biomech. 1991;24:127-136.
41. Butler DL, Goldstein SA, Guilak F. Functional tissue engineering: the role of biomechanics. J Biomech Eng. 2000;122:570-575.
42. Sikavitsas VI, Bancroft GN, Mikos AG. Formation of threedimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor. J Biomed Mater Res. 2002;62:136-148.
43. Qiu QQ, Ducheyne P, Ayyaswamy PS. Fabrication, characterization and evaluation of bioceramic hollow microspheres used as microcarriers for 3-D bone tissue formation in rotating bioreactors. Biomaterials. 1999;20:989-1001.
44. Bancroft GN, Sikavitsas VI, Mikos AG. Design of a flow perfusion bioreactor system for bone tissue-engineering applications. Tissue Eng. 2003;9:549-554.
45. Anton F, Suck K, Diederichs S, Behr L, Hitzmann B, van Griensven M, Scheper T, Kasper C. Design and characterization of a rotating bed system bioreactor for tissue engineering applications. J Biotechnol Progr. 2008;24:140-147.
46. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials. 1999;20:1-25.
47. Chaplin AJ, Grace SR. Calcium oxalate and the von Kossa method with reference to the influence of citric acid. Histochem J. 1975;5:451-458.
48. Sanz-Herrera JA, Kasper C, van Griensven M, Garcia-Aznar JM, Ochoa I, Doblare M. Experimental and computational characterization of sponceram supports. Tissue Eng. 2007;13:1693.
49. Suck K, Behr L, Fischer M, Hoffmeister H, van Griensven M, Stahl F, Scheper T, Kasper C. Cultivation of MC3T3-E1 cells on a newly developed material (SponceramVR) using a rotating bed system (RBS) bioreactor. J Biomed Mater Res A. 2007;80:268-275.