Damage-based cohesive zone model for rate-depend interfacial fracture

International Journal of Damage Mechanics

Volumn 19, Issue 4, 2010, Pages 397-420

  Omiya, Masaki ^a   Kishimoto, Kikuo ^b  

^a KEIO UNIVERSITY   (Japan)

^b TOKYO INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

Cohesive zone model; Composite; Damage; Debonding; Fiber; Interface; Pull out; Rate depend.

Indexed keywords

BONDING INTERFACES; COHESIVE LAWS; COHESIVE MODEL; COHESIVE ZONE MODEL; COMPLEX BEHAVIOR; COMPOSITES MATERIAL; CONSTITUTIVE RELATIONS; CONTINUUM INTERFACE; CRACK FRONTS; CRACK PROPAGATION ANALYSIS; DAMAGE AND FAILURE; DAMAGE EVOLUTION; DAMAGE MECHANICS; DAMAGE STATE; DAMAGE VARIABLES; EVOLUTION EQUATIONS; FAILURE BEHAVIORS; FIBER INTERFACE; INTERFACE DEBONDING; INTERFACE SEPARATION; INTERFACE TRACTION; INTERFACIAL FRACTURE; INTERNAL VARIABLE THEORY; LIFE-TIMES; MATERIAL SYSTEMS; MATRIX CRACKING; PULL OUT; SHEAR STRESS DISTRIBUTION;

CRACKS; DEBONDING; FRACTURE; SHEAR STRESS; STRESS CONCENTRATION;

MATHEMATICAL MODELS;

EID: 77951850410     PISSN: 10567895     EISSN: 15307921     Source Type: Journal    
DOI: 10.1177/1056789509103643     Document Type: Article

References (55)

1. Abdul-Baqi, A. and Van der Giessen, E. (2002). Numerical Analysis of Indentation-induced Cracking of Brittle Coatings on Ductile Substrates, Int. J. Solids Struct., 39: 1427-1442. (Pubitemid 34315918)
2. Allix, O. and Ladeveze, P. (1992). Interlaminar Interface Modeling for the Prediction of Delamination, Compos. Struct., 22: 235-242. (Pubitemid 23582976)
3. Allix, O. (2001). A Composite Damage Meso-model for Impact Problems, Compos. Sci. Technol., 61: 2193-2205. (Pubitemid 33112387)
4. Allix, O., Feissel, P. and Thevenet, P. (2003). A Delay Damage Mesomodel of Laminates under Dynamic Loading: Basic Aspects and Identification Issues, Comput. Struct., 81: 1177-1191.
5. Barenblatt, G.I. (1959). The Formation of Equilibrium Cracks during Brittle Fracture. General Ideas and Hypotheses. Axially-symmetric Cracks, J. Appl. Math. Mech., 23: 622-636.
6. Barenblatt, G.I. (1962). Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Adv. Appl. Mech., 7: 55-125.
7. Bjerke, T.W. and Lambros, J. (2003). Theoretical Development and Experimental Validation of a Thermally Dissipative Cohesive Zone Model for Dynamics Fracture of Amorphous Polymers, J. Mech. Phys. Solids, 51: 1147-1170.
8. Camacho, G.T. and Ortiz, M. (1996). Computational Modeling of Impact Damage in Brittle Materials, Int. J. Solids Struct., 33: 2899-2938. (Pubitemid 126377006)
9. Chaboche, J.L., Girard, R. and Levasseur, P. (1997). On the Interface Debonding Models, Int. J. Damage Mech., 6: 220-257. (Pubitemid 127672449)
10. Chaboche, J.L., Feyel, F. and Monerie, Y. (2001). Interface Debonding Models: A Viscous Regularization with a Limited Rate Dependency, Int. J. Solids Struct., 38: 3127-3160. (Pubitemid 32257373)
11. Corigliano, A. and Ricci, M. (2001). Rate Dependent Interface Models: Formulation and Numerical Applications, Int. J. Solids Struct., 38: 547-576. (Pubitemid 32028710)
12. De Borst, R. and Remmers, J.J.C. (2006). Computational Modeling of Delamination, Compos. Sci. Technol., 65: 375-386.
13. Dugdale, D.S. (1960). Yielding of Steel Sheets Containing Slits, J. Mech. Phys. Solids, 8: 100-104.
14. Ferracin, T., Landis, C.M., Delannay, F. and Pardoen, T. (2003). On the Determination of The Cohesive Zone Properties of an Adhesive Layer from the Analysis of the Wedge-peel Test, Int. J. Solids Struct., 40: 2889-2904. (Pubitemid 36615197)
15. Gaur, U. and Miller, B. (1989). Microbond Method for Determination of the Shear Strength of a Fiber/Resin Interface: Evaluation of Experimental Parameters, Compos. Sci. Technol., 34: 35-51.
16. Geubelle, P.H. and Baylor, J. (1998). Impact-induced Delamination of Laminated Composites: A 2D Simulation, Compos. Part B Engin., 29: 589-602. (Pubitemid 128381245)
17. Gupta, J.S., Allix, O., Boucard, P.A., Fanget, A. and Hereil, P.L. (2005). Fracture Prediction of a 3D C/C Material under Impact, Comps. Sci. Technol., 65: 375-386. (Pubitemid 40077550)
18. Hillerborg, A., Modeer, M. and Petersson, P.-E. (1976). Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements, Cement Concrete Res., 6: 773-782.
19. Kishimoto, K., Omiya, M. and Yang, W. (2002). Fracture Mechanics of Bonding Interface - A Cohesive Zone Model, Sens. Act., A Phy., 99: 198-206. (Pubitemid 34684714)
20. Knauss, W.G. (1974). On the Steady Propagation of a Crack in a Viscoelastic Sheet: Experiments and Analysis, In: Kaush, H.H., Hassell, J.A. and Jaffee, R.I. (eds.), Deformation and Fracture of High Polymers, pp. 501-540, New York, Plenum Press.
21. Ladeveze, P., Guitard, L., Champaney, L. and Aubard, X. (2000). Debond Modeling for Multidirectional Composites, Comput. Methods Appl. Mech. Eng., 185: 109-122.
22. Landis, C.M., Pardoen, T. and Hutchinson, J.W. (2000). Crack Velocity Dependent Toughness in Rate Dependent Materials, Mech. Mater., 32: 663-678.
23. Lemaitre, J. (1992). A Course on Damage Mechanics, Berlin, Springer.
24. Li, W. and Siegmund, T. (2003). An Analysis of a Size Effect in Indentation Delamination of a Ductile Film on an Elastic Substrate, Script Materialia, 49: 497-502.
25. Li, W. and Siegmund, T. (2004). An Analysis of the Indentation Test to Determine the Interface Toughness in a Weakly Bonded Thin Film Coating-substrate System, Acta Materialia, 52: 2989-2999.
26. Ma, F. and Kishimoto, K. (1996). A Continuum Interface Debonding Model and Application to Matrix Cracking of Composites, JSME Int. J. Series A, 39: 496-507. (Pubitemid 126699196)
27. Mai, Y.W. and Castino, F. (1984). Fracture Toughness of Kevlar-epoxy Composites with Controlled Interfacial Bonding, J. Mater. Sci., 19: 1638-1655. (Pubitemid 14590463)
28. Mai, Y.W. and Castino, F. (1985). The Debonding and Pull-out Properties of Coated Kevlar Fibres from an Epoxy Resin Matrix, J. Mater. Sci. Lett., 4: 505-508. (Pubitemid 15493317)
29. Maugin, G.A. (1992). The Thermomechanics of Plasticity and Fracture, Cambridge, Cambridge University Press.
30. Needleman, A. (1987). A Continuum Model for Void Nucleation by Inclusion Debonding, J. Appl. Mech., 54: 525-531. (Pubitemid 18555920)
31. Needleman, A. (1990 a). An Analysis of Tensile Decohesion along an Interface, J. Mech. Phys. Solids, 38: 289-324.
32. Needleman, A. (1990 b). An Analysis of Decohesion along an Imperfect Interface, Int. J. Fracture, 42: 21-40.
33. Needleman, A. (1997). Numerical Modeling of Crack Growth Under Dynamic Loading Conditions, Comput. Mech., 19: 463-469. (Pubitemid 127565997)
34. Nishikawa, M., Okabe, T., Hemmi, K. and Takeda, N. (2008 a). Micromechanical Modeling of the Microbond Test to Quantify the Interfacial Properties of Fiber-reinforced Composites, Int. J. Solids Struct., 45: 4098-4113.
35. Nishikawa, M., Okabe, T. and Takeda, N. (2008 b). Determination of Interface Properties from Experiments on the Fragmentation Process in Single-fiber Composites, Mater. Sci. Eng. A, 480: 549-557. (Pubitemid 351444564)
36. Okabe, T., Nishikawa, M. and Takeda, N. (2008). Numerical Modeling of Progressive Damage in Fiber Reinforced Plastic Cross-ply Laminates, Compos. Sci. Technol., 68: 2282-2289.
37. Omiya, M., Kishimoto, K. and Nakano, T. (2008). Evaluation of the Interfacial Strength of Layered Structures by the Indentation Method, J. Appl. Mech., 75: 031006-1-031006-6.
38. Omiya, M., Kishimoto, K. and Yang, W. (2002). Interface Debonding Model and its Application to the Mixed Mode Interface Fracture Toughness, Int. J. Damage Mech., 11: 263-286. (Pubitemid 34882289)
39. Pandolfi, A., Guduru, P.R., Ortiz, M. and Rosakis, A.J. (2000). Three Dimensional Cohesive-element Analysis and Experiments of Dynamics Fracture in C300 Steel, Int. J. Solids Struct., 37: 3733-3760. (Pubitemid 30587933)
40. Rahulkumar, P., Jagota, A., Bennison, S.J. and Saigal, S. (2000 a). Cohesive Element Modeling of Viscoelastic Fracture: Application to Peel Testing of Polymers, Int. J. Solids Struct., 37: 1873-1897. (Pubitemid 32210767)
41. Rahulkumar, P., Jagota, A., Bennison, S.J. and Saigal, S. (2000 b). Interfacial Failure in a Compressive Shear Strength Test of Glass/Polymer Laminates, Int. J. Solids Struct., 37: 7281-7305.
42. Schapery, R.A. (1975). A Theory of Crack Initiation and Growth in Visco-elastic Media, Int. J. Fracture, 11: 141-159.
43. Tvergaard, V. (1990). Effect of Fibre Debonding in a Whisker-reinforced Metal, Mat. Sci. Eng. A, 125: 203-213.
44. Tvergaard, V. and Hutchinson, J.W. (1992). The Relation Between Crack Growth Resistance and Fracture Process Parameters in Elastic-plastic Solids, J. Mech. Phys. Solids, 40: 1377-1397.
45. Tvergaard, V. (2001). Resistance Curves for Mixed Mode Interface Crack Growth between Dissimilar Elastic-plastic Solids, J. Mech. Phys. Solids, 49: 2689-2703. (Pubitemid 32975672)
46. Tvergaard, V. and Hutchinson, J.W. (1993). The Influence of Plasticity on Mixed-mode Interface Toughness, J. Mech. Phys. Solids, 41: 1119-1135.
47. Tvergaard, V. and Hutchinson, J.W. (1994). Toughness of an Interface along a Thin Ductile Layer Joining Elastic Solids, Philosophical Mag. A, 70: 641-656. (Pubitemid 24821130)
48. Tvergaard, V. and Hutchinson, J.W. (1996). On the Toughness of Ductile Adhesive Joints, J. Mech. Phys. Solids, 44: 789-800. (Pubitemid 126359302)
49. Wei, Y. and Hutchinson, J.W. (1997). Steady-state Crack Growth and Work of Fracture for Solids Characterized by Strain Gradient Plasticity, J. Mech. Phys. Solids, 45: 1253-1273. (Pubitemid 127382603)
50. Xu, X.P. and Needleman, A. (1993). Void Nucleation by Inclusion Debonding in a Crystal Matrix, Mod. Simul. Mater. Sci. Eng., 1: 111-132.
51. Xu, X.P. and Needleman, A. (1994). Numerical Simulation of Fast Crack Growth in Brittle Solids, J. Mech. Phys. Solids, 42: 1397-1434.
52. Xu, X.P. and Needleman, A. (1995). Analysis of Ductile Crack Growth by Means of a Cohesive Damage Model, Int. J. Fracture, 81: 99-112.
53. Yang, Q.D., Thouless, M.D. and Ward, S.M. (2001). Elastic-plastic Mode-II Fracture of Adhesive Joints, Int. J. Solids Struct., 38: 3251-3262.
54. Zhang, Y.W., Zeng, K.Y. and Thampurun, R. (2001). Interface Delamination Generated by Indentation in Thin Film Systems - A Computational Mechanics Study, Mater. Sci. Eng. A, 319-321: 893-897. (Pubitemid 34103335)
55. Zhou, C. Yang, W. and Fang, D. (2000). Damage of Short-fiber-reinforce Metal Matrix Composite Considering Cooling and Thermal Cycling, J. Eng. Mate. Tech., 122: 203-208.