Laser annealing of textured thin film cathode material for lithium ion batteries

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 7585, Issue , 2010, Pages

  Kohler, R ^a   Bruns, M ^a   Smyrek, P ^a   Ulrich, S ^a   Przybylski, M ^b   Pfleging, W ^a  

^a KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^b ATL Lasertechnik GmbH   (Germany)

Author keywords

Laser annealing; Laser structuring; Li ion battery; LiCoO2; Surface modification; Thin film technology

Indexed keywords

LASER ANNEALING; LASER STRUCTURING; LI-ION BATTERIES; SURFACE MODIFICATION; THIN-FILM TECHNOLOGY;

ANNEALING; ANODES; CATHODES; COBALT; ELECTROCHEMICAL ELECTRODES; ELECTROCHEMICAL PROPERTIES; IONS; LITHIUM ALLOYS; LITHIUM BATTERIES; LITHIUM COMPOUNDS; MATERIALS; RAMAN SPECTROSCOPY; STAINLESS STEEL; STOICHIOMETRY; SYNTHESIS (CHEMICAL); THIN FILMS; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

LITHIUM;

EID: 77951711959     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.841259     Document Type: Conference Paper

References (39)

1. Nishi, Y., "Lithium ion secondary batteries; past 10 years and the future", J. Power Sources 100(1-2), 101-106 (2001). (Pubitemid 33053358)
2. Yang, H., Amiruddin, S., Bang, H. J., Sun, Y. K. and Prakash, J., "A review of Li-Ion cell chemistries and their potential use in hybrid electric vehicles", J. Ind. Eng. Chem. 12(1), 12-38 (2006). (Pubitemid 43189555)
3. Wang, Y. and Cao, G. Z., "Developments in nanostructured cathode materials for high-performance lithium-ion batteries", Adv. Mat. 20(12), 2251-2269 (2008).
4. 2 powders by powder engineering methods", J. Eur. Ceram. Soc. 23(11), 1893-1899 (2003).
5. 2 cathode film for an all-solid-state thin film microbattery", J. Vac. Sci. Technol., A 22(4), 1182-1187 (2004).
6. Fujii, S., Kuroki, S. I., Kotani, K. and Ito, T., "Enlargement of crystal grains in thin silicon films by continuous-wave laser irradiation", Jpn. J. Appl. Phys., Part 1 46(4B), 2501-2504 (2007). (Pubitemid 47256810)
7. Marmorstein, A., Voutsas, A. T. and Solanki, R., "A systematic study and optimization of parameters affecting grain size and surface roughness in excimer laser annealed polysilicon thin films", J. Appl. Phys. 82(9), 4303-4309 (1997). (Pubitemid 127584818)
8. Liao, C. L. and Fung, K. Z., "Lithium cobalt oxide cathode film prepared by rf sputtering", J. Power Sources 128(2), 263-269 (2004).
9. Ketterer, B., Vasilchina, H., Seemann, K., Ulrich, S., Besser, H., Pfleging, W., Kaiser, T. and Adelhelm, C., "Development of high power density cathode materials for Li-ion batteries", Int. J. Mater. Res. 99(10), 1171-1176 (2008).
10. 2 thin films prepared by pulsed laser deposition", J. Power Sources 159(2), 1422-1427 (2006).
11. Fragnaud, P., Nagarajan, R., Schleich, D. M. and Vujic, D., "Thin-film cathodes for secondary lithium batteries", J. Power Sources 54(2), 362-366 (1995).
12. Chen, Y. T., Naessens, K., Baets, R., Liao, Y. S. and Tseng, A. A., "Ablation of transparent materials using excimer lasers for photonic applications", Opt. Rev. 12(6), 427-441 (2005). (Pubitemid 44220121)
13. Pfleging, W., Przybylski, M. and Bruckner, H. J., "Excimer laser material processing: state-of-the-art and new approaches in microsystem technology", Proc. SPIE 6107, 61070G (2006).
14. Ketterer, B., Vasilchina, H., Seemann, K., Ulrich, S., Besser, H., Pfleging, W., Kaiser, T. and Adelhelm, C., "Development of high power density cathode materials for Li-ion batteries", Int. J. Mater. Res. 99(10), 1171-1176 (2008).
15. 2 thin films", Proc. SPIE 7202, 720207 (2009).
16. 2 thin films on Pt-metalized silicon substrates", Rare Met. 27(3), 266-272 (2008).
17. 2 by Laser-Ablation Deposition", J. Appl. Phys. 76(5), 2799-2806 (1994).
18. 2: formation, structure, lithium and oxygen nonstoichiometry, electrochemical behaviour and transport properties", Solid State Ionics 170(3-4), 159-171 (2004).
19. Kratzsch, A., Ulrich, S., Leiste, H., Stuber, M. and Holleck, H., "Influence of the process gas, gas pressure, r.f. power and geometrical arrangement on the magnetron plasma parameters for various thin film materials of the systems Ti-N and B-C-N", Surf. Coat. Technol. 119, 949-955 (1999). (Pubitemid 30513727)
20. Pfleging, W. and Baldus, O., "Laser patterning and welding of transparent polymers for microfluidic device fabrication", Proc. SPIE 6107, 610705 (2006).
21. Lippert, T. and Dickinson, J. T., "Chemical and spectroscopic aspects of polymer ablation: Special features and novel directions", Chem. Rev. 103(2), 453-485 (2003).
22. Dyer, P. E., Jenkins, S. D. and Sidhu, J., "Development and Origin of Conical Structures on XeCl Laser Ablated Polyimide", Appl. Phys. Lett. 49(8), 453-455 (1986).
23. Krajnovich, D. J. and Vazquez, J. E., "Formation of Intrinsic Surface-Defects During 248 nm Photoablation of Polyimide", J. Appl. Phys. 73(6), 3001-3008 (1993).
24. Lloyd, R., Abdolvand, A., Schmidt, M., Crouse, P., Whitehead, D., Liu, Z. and Li, L., "Laser-assisted generation of self-assembled microstructures on stainless steel", Appl. Phys. A 93(1), 117-122 (2008).
25. Dolgaev, S. I., Fernandez-Pradas, J. M., Morenza, J. L., Serra, P. and Shafeev, G. A., "Growth of large microcones in steel under multipulsed Nd : YAG laser irradiation", Appl. Phys. A 83(3), 417-420 (2006).
26. Usoskin, A., Freyhardt, H. C. and Krebs, H. U., "Influence of light scattering on the development of laser-induced ridge-cone structures on target surfaces", Appl. Phys. A 69, S823-S826 (1999).
27. Dolgaev, S. I., Lavrishev, S. V., Lyalin, A. A., Simakin, A., Voronov, V. V. and Shafeev, G. A., "Formation of conical microstructures upon laser evaporation of solids", Appl. Phys. A 73(2), 177-181 (2001). (Pubitemid 32715551)
28. 3-TiC", Proc. SPIE 5715, 101 (2005).
29. Lloyd, R., Abdolvand, A., Schmidt, M., Crouse, P., Whitehead, D., Liu, Z. and Li, L., "Laser-assisted generation of self-assembled microstructures on stainless steel", Appl. Phys. A 93(1), 117-122 (2008).
30. Kelly, R., Miotello, A., Braren, B. and Otis, C. E., "On the debris phenomenon with laser-sputtered polymers", Appl. Phys. Lett. 60(24), 2980-2982 (1992).
31. 2 cathode thin films", Rare Met. 25, 189-192 (2006).
32. 2 synthesized from rapid thermal annealing method", Solid State Ionics 180(6-8), 612-615 (2009).
33. Pelletier, M. J., [Analytical applications of Raman spectroscopy], Wiley-Blackwell, Hoboken, NY, 442-447 (1999).
34. 4", J. Phys. C: Solid State Phys. 21(7), L199-L201 (1988).
35. 2", J. Solid State Chem. 117(1), 1-7 (1995).
36. 2 films", J. Electrochem. Soc. 148(4), A311-A317 (2001).
37. Kang, Y. S., Lee, H., Kang, Y. M., Lee, P. S. and Lee, J. Y., "Crystallization of lithium cobalt oxide thin films by radio-frequency plasma irradiation", J. Appl. Phys. 90(12), 5940-5945 (2001). (Pubitemid 34046739)
38. Ensling, D., Thissen, A., Gassenbauer, Y., Klein, A. and Jaegermann, W., "In-situ preparation and analysis functional oxides", Adv. Eng. Mater. 7(10), 945-949 (2005). (Pubitemid 41728514)
39. Dupin, J. C., Gonbeau, D., Benqlilou-Moudden, H., Vinatier, P. and Levasseur, A., "XPS analysis of new lithium cobalt oxide thin-films before and after lithium deintercalation", Thin Solid Films 384(1), 23-32 (2001). (Pubitemid 32196567)