Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells

Solar Energy Materials and Solar Cells

Volumn 94, Issue 6, 2010, Pages 1118-1124

  Min Nam, Young ^a   Huh, June ^b   Ho Jo, Won ^a  

^a Seoul National University   (South Korea)

^b Yonsei University   (South Korea)

Author keywords

Bulk heterojunction; Drift diffusion model; Organic solar cell; P3HT:PCBM.; Transfer matrix formalism

Indexed keywords

ACTIVE LAYER; BULK HETEROJUNCTION; BUTYRIC ACIDS; DEVICE PARAMETERS; DEVICE PERFORMANCE; DOMAIN SIZE; DRIFT-DIFFUSION MODEL; LAYER CONFIGURATION; METHYL ESTERS; OPTIMUM THICKNESS; ORGANIC SOLAR CELL; PHOTOVOLTAIC PROPERTY; POLY (3-HEXYLTHIOPHENE); TRANSFER MATRIXES; TWO DIMENSIONAL MODEL;

ESTERS; FATTY ACIDS; HETEROJUNCTIONS; MORPHOLOGY; SOLAR POWER GENERATION; SWITCHING CIRCUITS; TRANSFER MATRIX METHOD;

SOLAR CELLS;

EID: 77950862044     PISSN: 09270248     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.solmat.2010.02.041     Document Type: Article

References (65)

1. Krebs F.C. Fabrication and processing of polymer solar cells: a review of printing and coating techniques. Sol. Energy Mater. Sol. Cells 93 (2009) 394-412
2. Kippelen B., and Bredas J.L. Organic photovoltaics. Energy Environ. Sci. 2 (2009) 251-261
3. Gunes S., Neugebauer H., and Sariciftci N.S. Conjugated polymer-based organic solar cells. Chem. Rev. 107 (2007) 1324-1338
4. Gonzalez-Valls I., and Lira-Cantu M. Vertically-aligned nanostructures of ZnO for excitonic solar cells: a review. Energy Environ. Sci. 2 (2009) 19-34
5. Ameri T., Dennler G., Lungenschmied C., and Brabec C.J. Organic tandem solar cells: a review. Energy Environ. Sci. 2 (2009) 347-363
6. Helgesen M., Sondergaard R., and Krebs F.C. Advanced materials and processes for polymer solar cell devices. J. Mater. Chem. 20 (2010) 36-60
7. Mihailetchi V.D., Koster L.J.A., Blom P.W.M., Melzer C., De Boer B., Van Duren J.K.J., and Janssen R.A.J. Compositional dependence of the performance of poly(p-phenylene vinylene): methanofullerene bulk-heterojunction solar cells. Adv. Funct. Mater. 15 (2005) 795-801
8. Nishizawa T., Tajima K., and Hashimoto K. The effect of crystallinity in donor groups on the performance of photovoltaic devices based on an oligothiophene-fullerene dyad. Nanotechnology 19 (2008) 424017-1-424017-8
9. Erb T., Zhokhavets U., Gobsch G., Raleva S., Stuhn B., Schilinsky P., Waldauf C., and Brabec C.J. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells. Adv. Funct. Mater. 15 (2005) 1193-1196
10. Li G., Shrotriya V., Huang J.S., Yao Y., Moriarty T., Emery K., and Yang Y. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends. Nat. Mater. 4 (2005) 864-868
11. Ma W.L., Yang C.Y., Gong X., Lee K., and Heeger A.J. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology. Adv. Funct. Mater. 15 (2005) 1617-1622
12. Kim Y., Cook S., Tuladhar S.M., Choulis S.A., Nelson J., Durrant J.R., Bradley D.D.C., Giles M., Mcculloch I., Ha C.S., and Ree M. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells. Nat. Mater. 5 (2006) 197-203
13. Reyes-Reyes M., Kim K., and Carroll D.L. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C-61 blends. Appl. Phys. Lett. 87 (2005) 083506-1-083506-3
14. Yu G., and Heeger A.J. Charge separation and photovoltaic conversion in polymer composites with internal dornor-acceptor heterojunctions. J. Appl. Phys. 78 (1995) 4510-4515
15. Kim J.Y., Lee K., Coates N.E., Moses D., Nguyen T.Q., Dante M., and Heeger A.J. Efficient tandem polymer solar cells fabricated by all-solution processing. Science 317 (2007) 222-225
16. Yao Y., Hou J.H., Xu Z., Li G., and Yang Y. Effect of solvent mixture on the nanoscale phase separation in polymer solar cells. Adv. Funct. Mater. 18 (2008) 1783-1789
17. Kim J.Y., Kim S.H., Lee H.H., Lee K., Ma W.L., Gong X., and Heeger A.J. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer. Adv. Mater. 18 (2006) 572-576
18. Gilot J., Barbu I., Wienk M.M., and Janssen R.A.J. The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study. Appl. Phys. Lett. 91 (2007) 113520-1-113520-3
19. Lee J.U., Cirpan A., Emrick T., Russell T.P., and Jo W.H. Synthesis and photophysical property of well-defined donor-acceptor diblock copolymer based on regioregular poly(3-hexylthiophene) and fullerene. J. Mater. Chem. 19 (2009) 1483-1489
20. Lee J.U., Jung J.W., Emrick T., Russell T.P., and Jo W.H. Morphology control of a polythiophene-fullerene bulk heterojunction for enhancement of the high-temperature stability of solar cell performance by a new donor-acceptor diblock copolymer. Nanotechnology 21 (2010) 105201-1-105201-9
21. Scharber M.C., Wuhlbacher D., Koppe M., Denk P., Waldauf C., Heeger A.J., and Brabec C.L. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy-conversion efficiency. Adv. Mater. 18 (2006) 789-794
22. Dennler G., Scharber M.C., Ameri T., Denk P., Forberich K., Waldauf C., and Brabec C.J. Design rules for donors in bulk-heterojunction tandem solar cells-towards 15% energy-conversion efficiency. Adv. Mater. 20 (2008) 579-583
23. Al-Ibrahim M., Roth H.K., Zhokhavets U., Gobsch G., and Sensfuss S. Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene. Sol. Energy Mater. Sol. Cells 85 (2005) 13-20
24. Krebs F.C., Jorgensen M., Norrman K., Hagemann O., Alstrup J., Nielsen T.D., Fyenbo J., Larsen K., and Kristensen J. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration. Sol. Energy Mater. Sol. Cells 93 (2009) 422-441
25. Krebs F.C., Alstrup J., Spanggaard H., Larsen K., and Kold E. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate. Sol. Energy Mater. Sol. Cells 83 (2004) 293-300
26. Jorgensen M., Norrman K., and Krebs F.C. Stability/degradation of polymer solar cells. Sol. Energy Mater. Sol. Cells 92 (2008) 686-714
27. Krebs F.C., and Spanggaard H. Significant improvement of polymer solar cell stability. Chem. Mater. 17 (2005) 5235-5237
28. Nunzi J.M. Organic photovoltaic materials and devices. C. R. Phys. 3 (2002) 523-542
29. Jo J., Na S.I., Kim S.S., Lee T.W., Chung Y., Kang S.J., Vak D., and Kim D.Y. Three-dimensional bulk heterojunction morphology for achieving high internal quantum efficiency in polymer solar cells. Adv. Func. Mater. 19 (2009) 2398-2406
30. Shaheen S.E., Brabec C.J., Sariciftci N.S., Padinger F., Fromherz T., and Hummelen J.C. 2.5% efficient organic plastic solar cells. Appl. Phys. Lett. 78 (2001) 841-843
31. Miyanishi S., Tajima K., and Hashimoto K. Morphological stabilization of polymer photovoltaic cells by using cross-linkable poly(3-(5-hexenyl)thiophene). Macromolecules 42 (2009) 1610-1618
32. Watkins P.K., Walker A.B., and Verschoor G.L.B. Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology. Nano Lett. 5 (2005) 1814-1818
33. Pettersson L.A.A., Roman L.S., and Inganas O. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films. J. Appl. Phys. 86 (1999) 487-496
34. Sievers D.W., Shrotriya V., and Yang Y. Modeling optical effects and thickness dependent current in polymer bulk-heterojunction solar cells. J. Appl. Phys. 100 (2006) 114509-1-114509-7
35. Moule A.J., and Meerholz K. Minimizing optical losses in bulk heterojunction polymer solar cells. Appl. Phys. B: Lasers Opt. 86 (2007) 721-727
36. Ameri T., Dennler G., Waldauf C., Denk P., Forberich K., Scharber M.C., Brabec C.J., and Hingerl K. Realization, characterization and optical modeling of inverted bulk-heterojunction organic solar cells. J. Appl. Phys. 103 (2008) 084506-1-084506-6
37. Buxton G.A., and Clarke N. Predicting structure and property relations in polymeric photovoltaic devices. Phys. Rev. B 74 (2006) 085207-1-085207-5
38. Buxton G.A., and Clarke N. Computer simulation of polymer solar cells. Modelling Simulation Mater. Sci. Eng. 15 (2007) 13-26
39. Dennler G., Forberich K., Scharber M.C., Brabec C.J., Tomis I., Hingerl K., and Fromherz T. Angle dependence of external and internal quantum efficiencies in bulk-heterojunction organic solar cells. J. Appl. Phys. 102 (2007) 054516-1-054516-7
40. Lacic S., and Inganas O. Modeling electrical transport in blend heterojunction organic solar cells. J. Appl. Phys. 97 (2005) 124901-1-124901-7
41. Lei B., Yao Y., Kumar A., Yang Y., and Ozolins V. Quantifying the relation between the morphology and performance of polymer solar cells using Monte Carlo simulations. J. Appl. Phys. 104 (2008) 024504-1-024504-6
42. Marsh R.A., Groves C., and Greenham N.C. A microscopic model for the behavior of nanostructured organic photovoltaic devices. J. Appl. Phys. 101 (2007) 083509-1-083509-7
43. Maturova K., Van Bavel S.S., Wienk M.M., Janssen R.A.J., and Kemerink M. Morphological device model for organic bulk heterojunction solar cells. Nano Lett. 9 (2009) 3032-3037
44. Ruhstaller B., Carter S.A., Barth S., Riel H., Riess W., and Scott J.C. Transient and steady-state behavior of space charges in multilayer organic light-emitting diodes. J. Appl. Phys. 89 (2001) 4575-4586
45. Scott J.C., and Malliaras G.G. Charge injection and recombination at the metal-organic interface. Chem. Phys. Lett. 299 (1999) 115-119
46. Selberherr S. Analysis and Simulation of Semiconductor Devices, first ed. (1984), Springer-Verlag, Wien
47. Watkins P.K., Walker A.B., and Verschoor G.L.B. Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology. Nano Lett. 5 (2005) 1814-1818
48. Barker J.A., Ramsdale C.M., and Greenham N.C. Modeling the current-voltage characteristics of bilayer polymer photovoltaic devices. Phys. Rev. B 67 (2003) 075205-1-075205-9
49. Koster L.J.A., Smits E.C.P., Mihailetchi V.D., and Blom P.W.M. Device model for the operation of polymer/fullerene bulk heterojunction solar cells. Phys. Rev. B 72 (2005) 085205-1-085205-9
50. Hoppe H., and Sariciftci N.S. Morphology of polymer/fullerene bulk heterojunction solar cells. J. Mater. Chem. 16 (2006) 45-61
51. Monestier F., Simon J.J., Torchio P., Escoubas L., Florya F., Bailly S., De Bettignies R., Guillerez S., and Defranoux C. Modeling the short-circuit current density of polymer solar cells based on P3HT:PCBM blend. Sol. Energy Mater. Sol. Cells 91 (2007) 405-410
52. Moule A.J., Bonekamp J.B., and Meerholz K. The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells. J. Appl. Phys. 100 (2006) 094503-1-094503-7
53. Azzam R.M.A., and Bashara N.M. Ellipsometry and Polarized Light, first ed. (1977), North-Holland, Amsterdam
54. Zhu D.X., Shen W.D., Ye H., Liu X., and Zhen H.Y. Determination of the optical constants of polymer light-emitting diode films from single reflection measurements. J. Phys. D: Appl. Phys. 41 (2008) 235104-1-235104-5
55. Bass M. Handbook of Optics, second ed. (1995), McGraw-Hill, New York
56. Losurdo M., Giangregorio M., Capezzuto P., Bruno G., De Rosa R., Roca F., Summonte C., Pla J., and Rizzoli R. Parametrization of optical properties of indium-tin-oxide thin films by spectroscopic ellipsometry: substrate interfacial reactivity. J. Vac. Sci. Technol. A 20 (2002) 37-42
57. Smith D.Y., Shiles E., and Inokuti M. The optical properties of metallic aluminum. In: Palik E.D. (Ed). Handbook of Optical Constants of Solids (1998), Academic Press, San Diego 395-401
58. Braun C.L. Electric field assisted dissociation of charge transfer states as a mechanism of photocarrier production. J. Chem. Phys. 80 (1984) 4157-4161
59. Goliber T.E., and Perlstein J.H. Analysis of photogeneration in a doped polymer system in terms of a kinetic-model for electric-field-assisted dissociation of charge-transfer states. J. Chem. Phys. 80 (1984) 4162-4167
60. Scharfetter D.L., and Gummel H.K. Large-signal analysis of a silicon read diode oscillator. IEEE Trans. Electron Dev. 16 (1969) 64-77
61. ASTM. ASTM G173-03e1 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37 Tilted Surface (2003), American Society for Testing and Materials pp. 1-20
62. Shaw P.E., Ruseckas A., and Samuel I.D.W. Exciton diffusion measurements in poly(3-hexylthiophene). Adv. Mater. 20 (2008) 3516-3520
63. Goh C., Kline R.J., Mcgehee M.D., Kadnikova E.N., and Frechet J.M.J. Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes. Appl. Phys. Lett. 86 (2005) 122110-1-122110-3
64. Jonsson S.K.M., Salaneck W.R., and Fahman M. Photoemission of Alq(3) and C-60 films on Al and LIF/Al substrates. J. Appl. Phys. 98 (2005) 014901-1-014901-7
65. Kumar P., Jain S.C., Kumar V., Chand S., and Tandon R.P. Effect of illumination on the space charge limited current in organic bulk heterojunction diodes. Appl. Phys. A: Mater. Sci. Process 94 (2009) 281-286