Fiber Bonding and Particle Aggregation as Promising Methodologies for the Fabrication of Biodegradable Scaffolds for Hard-Tissue Engineering

Biodegradable Systems in Tissue Engineering and Regenerative Medicine

Volumn , Issue , 2004, Pages 53-66

  Gomes, Manuela E ^a   Malafaya, Patrícia B ^a   Reis, Rui L ^a  

^a UNIVERSITY OF MINHO   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77649119579     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203491232-10     Document Type: Chapter

References (70)

1. Lu, L. and Mikos, A.G., The importance of new processing techniques in tissue engineering, MRS Bull./Mater. Res. Soc., 21, 28, 1996.
2. Agrawal, C.M., Mater. Sci. Forum, 250, 115, 1997.
3. Thompson, R. et al., Polymer scaffold processing, in Principles of Tissue Engineering, 1st ed., Lanza, R., Langer, R., and Chick, W., Eds., Academic Press, New York, 1997, p. 263.
4. Mikos, A. et al., Preparation and characterization of poly(L-lactic acid) foams, Polymer, 35, 1068, 1994.
5. Holy, C.E. et al., Engineering three-dimensional bone tissue in vitro using biodegradable scaffolds: Investigating initial cell-seeding density and culture period, J. Biomed. Mater. Res., 51, 376, 2000.
6. Lin, H.R. et al., Preparation of macroporous biodegradable PLGA scaffolds for cell attachment with the use of mixed salts as porogen additives, J. Biomed. Mater. Res., 63, 271, 2002.
7. Mikos, A.G. et al., Laminated three-dimensional biodegradable foams for use in tissue engineering, Biomaterials, 14, 323, 1993.
8. Hutmacher, D.W., Scaffolds in tissue engineering bone and cartilage, Biomaterials, 21, 2529, 2000.
9. Gomes, M.E. et al., Effect of flow perfusion on the osteogenic differentiation of bone marrow stromal cells cultured on starch-based three-dimensional scaffolds, J. Biomed. Mater. Res., 67A, 87, 2003.
10. Li, Y. et al., Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds, Biomaterials, 22, 609, 2001.
11. Langer, R.S. and Vacanti, J.P., Tissue engineering: the challenges ahead, Sci. Am., 280, 86, 1999.
12. Guidoin, M.F. et al., Analysis of retrieved polymer fiber based replacements for the ACL, Biomaterials, 21, 2461, 2000.
13. Freed, L.E. et al., Chondrogenesis in a cell-polymer-bioreactor system, Exp. Cell Res., 240, 58, 1998.
14. Vunjak-Novakovic, G. et al., Dynamic cell seeding of polymer scaffolds for cartilage tissue engineering, Biotechnol. Prog., 14, 193, 1998.
15. Mooney, D.J. et al., Novel approach to fabricate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents, Biomaterials, 17, 1417, 1996.
16. Gomes, M.E. et al., A new approach based on injection moulding to produce biodegradable starchbased polymeric scaffolds: morphology, mechanical and degradation behaviour, Biomaterials, 22, 883, 2001.
17. Gomes, M. et al., Design and processing of starch-based scaffolds for hard tissue engineering, J. Appl. Med. Polym., 6, 75, 2002.
18. Gomes, M. et al., Alternative tissue engineering scaffolds based on starch: processing methodologies, morphology, degradation and mechanical properties, Mater. Sci. Eng. C, 20, 19, 2002.
19. Thomson, R.C. et al., Fabrication of biodegradable polymer scaffolds to engineer trabecular bone, J. Biomater. Sci. Polym. Ed., 7, 1995.
20. Borden, M. et al., The sintered microsphere matrix for bone tissue engineering: In vitro osteoconductivity studies, J. Biomed. Mater. Res., 61, 421, 2002.
21. Borden, M. et al., Tissue engineered microsphere-based matrices for bone repair: design and evaluation, Biomaterials, 23, 551, 2002.
22. Malafaya, P.B. et al., Porous starch-based drug delivery systems processed by a microwave route, J. Biomater. Sci. Polym. Ed., 12, 2001.
23. Hutmacher, D.W. et al., Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling, J. Biomed. Mater. Res., 55, 203, 2001.
24. Hutmacher, D.W. et al., in Polymer Based Systems in Tissue Engineering, Replacement and Regeneration, Reis, R.L. and Cohn, D., Eds., Kluwer Press, Dordrecht, 2002.
25. Hutmacher, D.W. et al., in Polymer Based Systems in Tissue Engineering, Replacement and Regeneration, Reis, R.L. and Cohn, D., Eds., Dordrecht, 2002.
26. Freed, L.E., Culture of organized cell communities, Adv. Drug Delivery, 33, 15, 1998.
27. Middleton, J.C. and Tipton, A.J., Synthetic biodegradable polymers as orthopedic devices, Biomaterials, 21, 2335, 2000.
28. Vacanti, C.A. and Bonassar, L.J., An overview of tissue engineered bone, Clin. Orthopaed., 367 Suppl., S375, 1999.
29. Kim, B.S. and Mooney, D.J., Development of biocompatible synthetic extracellular matrices for tissue engineering, Trends Biotechnol., 16, 224, 1998.
30. Chapekar, M., Tissue engineering: challenges and opportunities, J. Biomed. Mater. Res. (Appl. Biomater.), 53, 617, 2000.
31. Thompson, R. et al., Biodegradable polymer scaffolds to regenerate organs, Adv. Polym. Sci., 122, 247, 1995.
32. Langer, R., Selected advances in drug delivery and tissue engineering, J. Control. Release, 62, 7, 1999.
33. Freed, L.E. et al., Biodegradable polymer scaffolds for tissue engineering, Biotechnology (N.Y.), 12, 689, 1994.
34. Leong, K. et al., Solid free fabrication of three-dimensional scaffolds for engineering replacement tissue and organs, Biomaterials, 24, 2363, 2003.
35. Maquet, V. and Jerome, R., Design of macroporous biodegradable polymer scaffolds for cell transplantation, Porous Mater. Tissue Eng., 250, 15, 1997.
36. Freed, L.E. et al., Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers, J. Biomed. Mater. Res., 27, 11, 1993.
37. Freed, L.E. et al., Cultivation of cell-polymer cartilage implants in bioreactors, J. Cell. Biochem., 51, 257, 1993.
38. Freed, L.E. et al., Tissue engineering of cartilage in space, Proc. Natl. Acad. Sci. U.S.A., 94, 13885, 1997.
39. Freed, L.E. and Vunjak-Novakovic, G., Culture of organized cell communities, Adv. Drug Delivery Rev., 33, 15, 1998.
40. Vunjak-Novakovic, G. et al., Bioreactor cultivation conditions modulate the composition and mechanical properties of tissue-engineered cartilage, J. Orthopaed. Res., 17, 130, 1999.
41. Rotter, N. et al., Cartilage reconstruction in head and neck surgery: comparison of resorbable polymer scaffolds for tissue engineering of human septal cartilage, J. Biomed. Mater. Res., 42, 347, 1998.
42. Mikos, A.G. et al., Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation, J. Biomed. Mater. Res., 27, 183, 1993.
43. Li, Y. et al., Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds, Biomaterials, 22, 609, 2001.
44. Aigner, J. et al., Cartilage tissue engineering with novel nonwoven structured biomaterial based on hyaluronic acid benzyl ester, J. Biomed. Mater. Res., 42, 172, 1998.
45. Milella, E. et al., Physico-chemical properties and degradability of non-woven hyaluronan benzylic esters as tissue engineering scaffolds, Biomaterials, 23, 1053, 2002.
46. Gentlemann, E. et al., Mechanical characterization of collagen fibers and scaffolds for tissue engineering, Biomaterials, 24, 3805, 2003.
47. Saldanha, V. and Grande, D.A., Extracellular matrix protein gene expression of bovine chondrocytes cultured on resorbable scaffolds, Biomaterials, 21, 2427, 2000.
48. Mendes, S.C. et al., Evaluation of biodegradable polymeric systems as substrates for bone tissue engineering, Tissue Eng., 9, S91, 2003.
49. Kenawy, E.-R. et al., Electrospinning of poly(ethylene-co-vinyl alcohol) fibers, Biomaterials, 24, 907, 2003.
50. Zong, X. et al., Structure and process relationship of electrospun bioabsorbable nanofiber membranes, Polymer, 43, 4403, 2002.
51. Boland, E. et al., Tailoring tissue engineering scaffolds using electrostatic processing techniques: A study of poly(glycolic acid) electrospinning, J. Macromol. Sci.: Pure Appl. Chem., A38, 1231, 2001.
52. Stitzel, J.D. et al., Arterial smooth muscle cell proliferation on a novel biomimicking, biodegradable vascular graft scaffold, J. Biomater. Appl., 16, 22, 2001.
53. Li, W.-J. et al., Electrospun nanofibrous structure: a novel scaffold for tissue engineering, J. Biomed. Mater. Res., 60, 613, 2002.
54. Yoshimoto, H. et al., A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering, Biomaterials, 24, 2077, 2003.
55. Bowlin, G. et al., Electrospinning of polymer scaffolds for tissue engineering, in Tissue Engineering and Biodegradable Equivalents: Scientific and Clinical Applications, Lewandrowski, K.-U., Wise, D., Trantolo, D., Gresser, J., Yaszemski, M., and Altobelli, D., Eds., Marcel Dekker, Inc., New York, 2002, p. 165.
56. Matthews, J. et al., Electrospinning of collagen nanofibers, Biomacromolecules, 3, 232, 2002.
57. Matthews, J.A. et al., Electrospinning of collagen type II: A feasibility study, J. Bioactive Compatible Polym., 18, 125, 2003.
58. Huang, L. et al., High-resolution analysis of engineered type I collagen nanofibers by electron microscopy, Scanning, 23, 372, 2001.
59. Huang, L. et al., Engineered collagen-PEO nanofibers and fabrics, J. Biomater. Sci.: Polym. Ed., 12, 979, 2001.
60. Huang, L. et al., Engineered collagen-PEO nanofibers and fabrics, J. Biomater. Sci.: Polym. Ed., 12, 979, 2001.
61. Kenawy, E.-R. et al., Release of tetracycline hydrochloride from electrospun poly(ethylene-co-vinyl acetate), poly(lactic acid) and a blend, J. Control. Release, 81, 57, 2002.
62. Kohn, J. and Langer, R., Bioresorbable and bioerodible materials, in Biomaterials Science, Ratner, B., Hoffman, A., Schoen, F., and Lemons, J., Eds., Academic Press, New York, 1996, p. 64.
63. Vacanti, C. et al., Structural tissue engineering, in Principles in Tissue Engineering, 2nd ed., Lanza, R., Langer, R., and Vacanti, J., Eds., Academic Press, New York, 2000, p. 671.
64. Tabata, Y., Recent progress in tissue engineering, Drug Discov. Today, 6, 483, 2001.
65. Ikada, Y. and Tabata, Y., Eds., Marcel Dekker, New York, 2002, p. 145.
66. Malafaya, P.B. and Reis, R.L., Development and characterization of pH responsive chitosan and chitosan/HA scaffolds processed by a microsphere-based aggregation route, in 7th World Biomaterials Congress, Sydney, Australia, 2004.
67. Nof, M. and Shea, L.D., Drug-releasing scaffolds fabricated from drug-loaded microspheres, J. Biomed. Mater. Res., 59, 349, 2002.
68. Botchwey, E.A. et al., Bone tissue engineering in a rotating bioreactor using a microcarrier matrix system, J. Biomed. Mater. Res., 55, 242, 2001.
69. Borden, M. et al., Structural and human cellular assessment of a novel microsphere-based tissue engineered scaffold for bone repair, Biomaterials, 24, 597, 2003.
70. Jang, J.H. and Shea, L.D., Controllable delivery of non-viral DNA from porous scaffolds, J. Control. Release, 86, 157, 2003.