Effect of Passive Fit Absence in the Prosthesis/Implant/Retaining Screw System: A Two-Dimensional Finite Element Analysis

Journal of Craniofacial Surgery

Volumn 20, Issue 6, 2009, Pages 2000-2005

  Gomes, Érica Alves ^a   Tabata, Lucas Fernando ^b   Barão, Valentim Adelino Ricardo ^b   Delben, Juliana Aparecida ^b  

^a Department of Dental Materials and Prosthodontics ^*  (Brazil)

^b Bauru Engineering School   (Brazil)

Author keywords

Biomechanics; Dental implants; Finite element analysis; Misfit; Prosthesis; Stress distribution

Indexed keywords

ARTICLE; COMPUTER SIMULATION; DENTAL CARE; DENTAL SURGERY; FINITE ELEMENT ANALYSIS; INSTRUMENTATION; JAW; MECHANICAL STRESS; METHODOLOGY; PHYSIOLOGY; TOOTH CROWN; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

ALVEOLAR PROCESS; COMPUTER SIMULATION; CROWNS; DENTAL IMPLANTS; DENTAL PROSTHESIS RETENTION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; FINITE ELEMENT ANALYSIS; STRESS, MECHANICAL;

EID: 77449091889     PISSN: 10492275     EISSN: 15363732     Source Type: Journal    
DOI: 10.1097/SCS.0b013e3181bd2df8     Document Type: Article

References (46)

1. Millington ND, Leung T. Inaccurate fit of implant superstructures. Part 1: Stresses generated on the superstructure relative to the size of fit discrepancy. Int J Prosthodont 1995;8:511-516
2. Duyck J, Ronold HJ, Oosterwyck H, et al. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Implants Res 2001;12:207-218
3. Kunavisarut C, Lang LA, Stoner BR, et al. Finite element analysis on dental implant-supported prostheses without passive fit. J Prosthodont 2002;11:30-40
4. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent 1983;49:843-848
5. Cheshire PD, Hobkirk JA. An in vivo quantitative analysis of the fit of Nobel Biocare implant superstructures. J Oral Rehabil 1996;23:782-789
6. Ma T, Nicholls JI, Rubenstein JE. Tolerance measurements of various implant components. Int J Oral Maxillofac Implants 1997;12:371-375
7. Jemt T, Lekholm U. Measurements of bone and frame-work deformations induced by misfit of implant superstructures. A pilot study in rabbits. Clin Oral Implants Res 1998;9:272-280
8. Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 1992;7:26-33
9. Isa ZM, Hobkirk JA. The effects of superstructure fit and loading on individual implant units: Part I. The effects of tightening the gold screws and placement of a superstructure with varying degrees of fit. Eur J Prosthodont Restor Dent 1995;3:247-253
10. Isa MZ, Hobkirk JA. The effects of superstructure fit and loading on individual implant units: Part 2. The effects of loading a superstructure with varying degrees of fit. Eur J Prosthodont Restor Dent 1996;4:11-14
11. Jorneus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crows supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-359
12. Dellinges MA, Tebrock OC. A measurement of torque values obtained with hand-held drivers in a simulated clinical setting. J Prosthodont 1993;2:212-214
13. Carlson B, Carlsson GE. Prosthodontic complications in osseointegrated dental implant treatment. Int J Oral Maxillofac Implants 1994;9:90-94
14. Geng JP, Tan KB, Liu GR. Application of finite element analysis in implant dentistry: a review of the literature. J Prosthet Dent 2001;85:585-598
15. Jansen VK, Conrads G, Richter EJ. Microbial leakage and marginal fit of the implant-abutment interface. Int J Oral Maxillofac Implants 1997;12:527-540
16. Carr AB, Gerard DA, Larsen PE. The response of bone in primates around unloaded dental implants supporting prostheses with different levels of fit. J Prosthet Dent 1996;76:500-509
17. Jemt T, Book K. Prosthesis misfit and marginal bone loss in edentulous implant patients. Int J Oral Maxillofac Implants 1996;11:620-625
18. Michaels GC, Carr AB, Larsen PE. Effect pf prosthetic superstructure accuracy on the osteointegrated implant bone interface. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 1997;83:198-205
19. Goftfredsen K, Berglundh T, Lindhe J. Bone reactions adjacent to titanium implants subjected to static load of different duration. A study in the dog (III). Clin Oral Implant Res 2001;12:552-558
20. Rangert B, Jemt T, Jorneus L. Forces and moments on Branemark implants. Int J Oral Maxillofac Implants 1989;4:241-247
21. Lie A, Jemt T. Photogrammetric measurements of implant positions. Description of a technique to determine the fit between implants and superstructures. Clin Oral Implants Res 1994;5:30-36
22. Binon PP. Evaluation of machining accuracy and consistency of selected implants, standard abutments, and laboratory analogs. Int J Prosthodont 1995;8:162-178
23. Kallus T, Bessing C. Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. Int J Oral Maxillofac Implants 1994;9:169-178
24. Goodacre CJ, Kan JY, Rungcharassaeng K. Clinical complications of osseointegrated implants. J Prosthet Dent 1999;81:537-552
25. Jemt T, Lekholm U, Johansson CB. Bone response to implant-supported frameworks with differing degrees of misfit preload: in vivo study in rabbits. Clin Implant Dent Relat Res 2000;2:129-137
26. Baiamonte T, Abbate MF, Pizzarello F, et al. The experimental verification of the efficacy of finite element modeling to dental implant systems. J Oral Implantol 1996;22:104-110
27. Rieger MR, Mayberry M, Brose MO. Finite element analysis of six endosseous implants. J Prosthet Dent 1990;63:671-676
28. Stegaroiu R, Sato T, Kusakari H, et al. Influence of restoration type on stress distribution in bone around implants: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants 1998;13:82-90
29. O'Mahony A, Bowles Q, Woolsey G, et al. Stress distribution in the single-unit osseointegrated dental implant: finite element analyses of axial and off-axial loading. Implant Dent 2000;9:207-218
30. Bozkaya D, Muftu S, Muftu A. Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite elements analysis. J Prosthet Dent 2004;92:523-530
31. Sutpideler M, Eckert SE, Zobitz M, et al. Finite element analysis of effect of prosthesis height, angle of force application, and implant offset on supporting bone. Int J Oral Maxillofac Implants 2004;19:819-825
32. Sakaguchi RL, Borgersen SE. Nonlinear contact analysis of preload in dental implant screws. Int J Oral Maxillofac Implants 1995;10:295-302
33. Haack JE, Sakaguchi RL, Sun T, et al. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995;10:529-536
34. Sertgoz A. Finite element analysis study of the effect of superstructure material on stress distribution in an implant-supported fixed prosthesis. Int J Prosthodont 1997;10:19-27
35. Byrne D, Houston F, Cleary R, et al. The fit of cast and premachined implant abutments. J Prosthet Dent 1998;80:184-192
36. Watanabe F, Uno I, Hata Y, et al. Analysis of stress distribution in a screw-retained implant prosthesis. Int J Oral Maxillofac Implants 2000;15:209-218
37. Alkan I, Sertgoz A, Ekici B. Influence of occlusal forces on stress distribution in preloaded dental implant screws. J Prosthet Dent 2004;91:319-325
38. Kitagawa T, Tanimoto Y, Odaki M, et al. Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system. J Biomed Mater Res B Appl Biomater 2005;75:457-463
39. Huang HM, Tsai CM, Chang CC, et al. Evaluation of loading conditions on fatigue-failed implants by fracture surface analysis. Int J Oral Maxillofac Implants 2005;20:854-859
40. Kano SC, Binon P, Bonfante G, et al. Effect of casting procedures on screw loosening in UCLA-type abutments. J Prosthodont 2006;15:77-81
41. Binon PP. The effect of implant/abutment hexagonal misfit on screw joint stability. Int J Prosthodont 1996;9:149-160
42. Barbier L, Vander Sloten J, Krzesinski E, et al. Finite element analysis of non-axial versus axial loading of oral implants in the mandible of the dog. J Oral Rehabil 1998;25:847-858
43. Craig RG. Restorative Dental Materials. St Louis, MO: Mosby, 1989
44. Sertgoz A, Gunever S. Finite element analysis of the effect of cantilever and implant length on stress distribution in an implant-supported prosthesis. J Prosthet Dent 1996;76:165-169
45. Holmgren EP, Seckinger RJ, Kilgren LM, et al. Evaluating parameters of osseointegrated dental implants using finite element analysis-a two dimensional comparative study examining the effects of implant diameter, implant shape, and load direction. J Oral Implantol 1998;24:80-88
46. Lewinstein I, Banks-Sills L, Eliasi R. Finite element analysis of a new system (IL) for supporting an implant-retained cantilever prosthesis. Int J Oral Maxillofac Implants 1995;10:355-366