Investigations on the effects of friction modeling in finite element simulation of machining

International Journal of Mechanical Sciences

Volumn 52, Issue 1, 2010, Pages 31-42

  Arrazola, Pedro J ^a   Özel, Tuǧrul ^b  

^a MONDRAGON UNIVERSITY   (Spain)

^b DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING   (United States)

Author keywords

Arbitrary Lagrangian Eulerian method; Finite element modeling; Friction laws; Limit shear stress

Indexed keywords

AISI 4340 STEEL; ALE TECHNIQUE; ARBITRARY LAGRANGIAN EULERIAN; ARBITRARY LAGRANGIAN EULERIAN METHOD; CONSTITUTIVE MATERIALS; CONTACT FRICTION; CUTTING PROCESS; FE MODEL; FE MODELING; FEM MODELING; FIELD VARIABLES; FINITE ELEMENT MODELING; FINITE ELEMENT SIMULATIONS; FLOW STRESS; FRICTION LAWS; FRICTION MODELING; FULLY-COUPLED; INVESTIGATE EFFECTS; LIMITING SHEAR STRESS; MACHINING PROCESS; NORMAL STRESS; ON CHIPS; PREDICTIVE PROCESS; PROCESS KNOWLEDGE; SIMULATION RESULT; SLIDING FRICTION; STRESS FIELD; THERMOMECHANICAL PROPERTIES; TOOL-CHIP CONTACT; WORK PIECES;

EXPERIMENTS; FINITE ELEMENT METHOD; LAGRANGE MULTIPLIERS; MACHINING; MECHANICAL PROPERTIES; SHEAR STRESS; SIMULATORS; STRENGTH OF MATERIALS; TRIBOLOGY; TUNGSTEN; TUNGSTEN CARBIDE;

FRICTION;

EID: 71949101700     PISSN: 00207403     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmecsci.2009.10.001     Document Type: Article

References (49)

1. Usui E, Shirakashi T. Mechanics of machining-from descriptive to predictive theory. In: On the art of cutting metals-75 years later, ASME Publication PED, vol. 7, 1982. p. 13-35.
2. Strenkowski J.S., and Carroll J.T. A finite element model of orthogonal metal cutting. ASME Journal of Engineering for Industry 107 (1985) 346-354
3. Komvopoulos K., and Erpenbeck S.A. Finite element modeling of orthogonal metal cutting. ASME Journal of Engineering for Industry 113 (1991) 253-267
4. Lin Z.C., and Lin S.Y. A couple finite element model of thermo-elastic-plastic large deformation for orthogonal cutting. ASME Journal of Engineering for Industry 114 (1992) 218-226
5. Zhang B., and Bagchi A. Finite element simulation of chip formation and comparison with machining experiment. ASME Journal of Engineering for Industry 116 (1994) 289-297
6. Shih A.J. Finite element simulation of orthogonal metal cutting. ASME Journal of Engineering for Industry 117 (1995) 84-93
7. Strenkowski J.S., and Carroll J.T. Finite element models of orthogonal cutting with application to single point diamond turning. International Journal of Mechanical Sciences 30 (1986) 899-920
8. Black J.T., and Huang J.M. An evaluation of chip separation criteria for the FEM simulation of machining. ASME Journal of Manufacturing Science and Engineering 118 (1996) 545-553
9. Sekhon G.S., and Chenot J.L. Some simulation experiments in orthogonal cutting. Numerical Methods in Industrial Forming Processes 901-906 (1992)
10. Marusich T.D., and Ortiz M. Modeling and simulation of high-speed machining. International Journal for Numerical Methods in Engineering 38 (1995) 3675-3694
11. Ceretti E., Fallböhmer P., Wu W.T., and Altan T. Application of 2-D FEM to chip formation in orthogonal cutting. Journal of Materials Processing Technology 59 (1996) 169-181
12. Leopold J, Semmler U, Hoyer K. 1999. Applicability, robustness and stability of the finite element analysis in metal cutting operations. In: Proceedings of the second CIRP international workshop on modeling of machining operations, Nantes, France, January 1999. p. 81-94.
13. Özel T., and Altan T. Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting. International Journal of Machine Tools and Manufacture 40 1 (2000) 133-152
14. Madhavan V., Chandrasekar S., and Farris T.N. Machining as a wedge indentation. Journal of Applied Mechanics 67 (2000) 128-139
15. Klocke F., Raedt H.-W., and Hoppe S. 2D-FEM simulation of the orthogonal high speed cutting process. Machining Science and Technology 5 3 (2001) 323-340
16. Baeker M., Rosler J., and Siemers C. A finite element model of high speed metal cutting with adiabatic shearing. Computers and Structures 80 (2002) 495-513
17. Rakotomalala R., Joyot P., and Touratier M. Arbitrary Lagrangian-Eulerian thermomechanical finite element model of material cutting. Communications in Numerical Methods in Engineering 9 (1993) 975-987
18. Olovsson L., Nilsson L., and Simonsson K. An ALE formulation for the solution of two-dimensional metal cutting problems. Computers and Structures 72 (1999) 497-507
19. Movahhedy M.R., Gadala M.S., and Altintas Y. FE modeling of chip formation in orthogonal metal cutting process: an ALE approach. Machining Science and Technology 4 (2000) 15-47
20. Movahhedy M.R., Altintas Y., and Gadala M.S. Numerical analysis of metal cutting with chamfered and blunt tools. ASME Journal of Manufacturing Science and Engineering 124 (2002) 178-188
21. Adibi-Sedeh AH, Madhavan V. Understanding of finite element analysis results under the framework of Oxley's machining model. In: Proceedings of the sixth CIRP international workshop on modeling of machining operations, Hamilton, Canada, 2003.
22. Özel T, Zeren E. 2005. Finite element method simulation of machining of AISI 1045 steel with a round edge cutting tool. In: Proceedings of the eighth CIRP international workshop on modeling of machining operations, Chemnitz, Germany, April 10-11, 2005. p. 533-42.
23. Haglund AJ, Kishawy HA, Rogers RJ. On friction modeling in orthogonal machining: an arbitrary Lagrangian-Eulerian finite element model. Transactions of NAMRI/SME 2005;33:589-96.
24. Arrazola PJ, Villar A, Ugarte D, Meslin F, Le Maître F, Marya S. 2005. Serrated chip prediction in numerical cutting models. In: Proceedings of the eighth CIRP international congress workshop on modelling of machining operations, Chemnitz, Germany, April 10-11, 2005. p. 115-22.
25. Ng E.-G., Tahany I.E.W., Dumitrescu M., and Elbastawi M.A. Physics-based simulation of high speed machining. Machining Science and Technology 6/3 (2002) 301-329
26. Özel T. Modeling of hard part machining: effect of insert edge preparation for CBN cutting tools. Journal of Materials Processing Technology 141 (2003) 284-293
27. Yen Y.-C., Jain A., and Altan T. A finite element analysis of orthogonal machining using different toll edge geometries. Journal of Material Processing Technology 146 1 (2004) 72-81
28. Guo Y.B., and Wen Q. A hybrid modeling approach to investigate chip morphology transition with the stagnation effect by cutting edge geometry. Transactions of NAMRI/SME 33 (2005) 469-476
29. Özel T., and Zeren E. Numerical modeling of meso-scale finish machining with finite edge radius tools. International Journal of Machining and Machinability of Materials 2 3/4 (2007) 451-468
30. Özel T., and Zeren E. Finite element analysis of the influence of edge roundness on the stress and temperature fields induced by high speed machining. International Journal of Advanced Manufacturing Technology 35 3-4 (2007) 255-267
31. Liu K., and Melkote S.N. Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process. International Journal of Mechanical Sciences 49 5 (2007) 650-660
32. Liu C.R., and Guo Y.B. Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer. International Journal of Mechanical Sciences 42 (2000) 1069-1086
33. Yang X., and Liu C.R. A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method. International Journal of Mechanical Sciences 44/4 (2002) 703-723
34. Guo Y.B., and Liu C.R. 3D FEA modeling of hard turning. ASME Journal of Manufacturing Science and Engineering 124 (2002) 189-199
35. Umbrello D., Hua J., and Shivpuri R. Hardness-based flow stress and fracture models for numerical simulation of hard machining AISI 52100 bearing steel. Materials Science and Engineering A 374 1-2 (2004) 90-100
36. Ee K.C., Dillon Jr. O.W., and Jawahir I.S. Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius. International Journal of Mechanical Sciences 47 10 (2005) 1611-1628
37. Outeiro J.C., Umbrello D., and Saoubi R.M. Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel. International Journal of Machine Tools and Manufacture 46 14 (2006) 1786-1794
38. Nasr M.N.A., Ng E.-G., and Elbestawi M.A. Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L. International Journal of Machine Tools and Manufacture 47 2 (2007) 401-411
39. Attanasio A., Ceretti E., Rizzuti S., Umbrello D., and Micari F. 3D finite element analysis of tool wear in machining. CIRP Annals-Manufacturing Technology 57 1 (2008) 61-64
40. Özel T., Karpat Y., and Srivastava A.K. Hard turning with variable micro-geometry PcBN tools. CIRP Annals-Manufacturing Technology 57 1 (2008) 73-76
41. Özel T. Computational modelling of 3D turning: influence of edge micro-geometry on forces, stresses, friction and tool wear in PcBN tooling. Journal of Materials Processing Technology 209 11 (2009) 5167-5177
42. Özel T., and Zeren E. A methodology to determine work material flow stress and tool-chip interfacial friction properties by using analysis of machining. ASME Journal of Manufacturing Science and Engineering 128 (2006) 119-129
43. Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the seventh international symposium on ballistics, The Hague, The Netherlands, 1983. p. 541-7.
44. Childs T.H.C., Maekawa K., Obikawa T., and Yamane Y. Metal machining: theory and applications (2000), Arnold Publishers, London, UK
45. Childs T.H.C., Dirikolu M.H., and Maekawa K. Modelling of friction in the simulation of metal machining. Tribology Series 34 (1998) 337-346
46. Dirikolu M.H., Childs T.H.C., and Maekawa K. Finite element simulation of chip flow in metal machining. International Journal of Mechanical Sciences 43 11 (2001) 2699-2713
47. Özel T. The influence of friction models on finite element simulations of machining. International Journal of Machine Tools and Manufacture 46 5 (2006) 518-530
48. Filice L., Micari F., Rizzuti S., and Umbrello D. A critical analysis on the friction modelling in orthogonal machining. International Journal of Machine Tools and Manufacture 47 3-4 (2007) 709-714
49. Arrazola P.J., Ugarte D., and Domínguez X. A new approach for the friction identification during machining through the use of finite element modeling. International Journal of Machine Tools and Manufacture 48 2 (2008) 173-183