Influence of surface and heat treatments on the flexural strength of a glass-infiltrated alumina/zirconia-reinforced dental ceramic

Dental Materials

Volumn 21, Issue 5, 2005, Pages 454-463

  Guazzato, Massimiliano ^a   Albakry, Mohammad ^a   Quach, Linda ^a   Swain, Michael V ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

Author keywords

Alumina; Dental ceramics; Glass; Heat treatment; Strength; Surface treatment; Zirconia

Indexed keywords

ALUMINA; BENDING STRENGTH; CERAMIC MATERIALS; FRACTURE; GLASS; GRINDING (COMMINUTION); HEAT TREATMENT; INFILTRATION; REGRESSION ANALYSIS; SCANNING ELECTRON MICROSCOPY; SURFACE TREATMENT; X RAY DIFFRACTION ANALYSIS; ZIRCONIA;

DENTAL CERAMICS; SANDBLASTING; STRENGTH DEGRADATION; WEIBULL ANALYSIS;

DENTAL MATERIALS;

ALUMINUM OXIDE; GLASS; IN CERAM; IN-CERAM; ZIRCONIUM; ZIRCONIUM OXIDE;

ANALYSIS OF VARIANCE; ARTICLE; DENTAL CARE; ELASTICITY; HEAT; MATERIALS TESTING; METALLURGY; NONPARAMETRIC TEST; PLIABILITY; REGRESSION ANALYSIS; SURFACE PROPERTY; SURVIVAL; TENSILE STRENGTH; TOOTH BRUSHING; TOOTH PROSTHESIS; X RAY CRYSTALLOGRAPHY;

ALUMINUM OXIDE; ANALYSIS OF VARIANCE; CRYSTALLOGRAPHY, X-RAY; DENTAL POLISHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; ELASTICITY; GLASS; HEAT; MATERIALS TESTING; METALLURGY; PLIABILITY; REGRESSION ANALYSIS; STATISTICS, NONPARAMETRIC; SURFACE PROPERTIES; SURVIVAL ANALYSIS; TENSILE STRENGTH; ZIRCONIUM;

EID: 16344363996     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2004.07.010     Document Type: Article

References (32)

1. B.R. Lawn, Y. Deng, and V.P. Thompson Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review J Prosthet Dent 86 2001 495 510
2. M. Kern, and V.A. Thompson Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition J Prosthet Dent 71 1994 453 461
3. M. Kern, and V.P. Thompson Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability J Prosthet Dent 73 1995 240 249
4. M. Blixt, E. Adamczak, L.-A. Linden, and K. Arvidson Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements Int J Prosthodont 13 2000 221 226
5. M. Guazzato, M. Albakry, M.V. Swain, and J.V. Ironside The mechanical properties of in-ceram alumina and in-ceram zirconia Int J Prosthodont 15 2002 339 346
6. M. Guazzato, M. Albakry, S.P. Ringer, and M.V. Swain Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics Dent Mater 20 2004 449 456
7. K.H. Chong, J. Chai, Y. Takahashi, and W.T. Wozniak Flexural strength on in-ceram alumina and in-ceram zirconia core materials Int J Prosthodont 15 2002 183 188
8. T. Kosmač, C. Oblak, P. Jevnikar, N. Funduk, and L. Marion The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TPZ zirconia ceramic Dent Mater 15 1999 426 433
9. T. Kosmač, C. Oblak, P. Jevnikar, N. Funduk, and L. Marion Strength and reliability of surface treated Y-TZP dental ceramics J Biomed Mater Res 53 2000 304 313
10. P.K. Gupta Strengthening by surface damage in metastable tetragonal zirconia J Am Ceram Soc 63 1980 117 121
11. D.J. Green A technique for introducing surface compression into zirconia ceramics J Am Ceram Soc 66 1983 C178 C179
12. M.V. Swain Limitation of maximum strength of zirconia-toughened ceramics by transformation toughening increment J Am Ceram Soc 68 1985 C97 C99
13. R. Giordano, M. Cima, and R. Pober Effect of surface finish on the flexural strength of feldspathic and aluminous dental ceramics Int J Prosthodont 8 1995 311 319
14. W.H. Tuan, and J.C. Kuo Effect of abrasive grinding on the strength and reliability of alumina J Eur Ceram Soc 18 1998 799 806
15. R. Samuel, S. Chandrasekar, T.N. Farris, and R.H. Licht Effect of residual stresses on the fracture of ground ceramics J Am Ceram Soc 72 1989 1960 1966
16. M.V. Swain, and R.H.J. Hannink Metastability of the martensitic transformation in a 12 mol% ceria-zirconia alloy: grinding studies J Am Ceram Soc 72 1989 1358 1364
17. J.J. Mecholsky, S.W. Freiman, and R.W. Rice Effect of grinding on flaw geometry and fracture of glass J Am Ceram Soc 60 1977 114 117
18. M.V. Swain Micro-fracture about scratches in brittle solids Proc R Soc Lond, Ser A (Math Phys Sci) 366 17 1979 275 297
19. I.L. Denry, J.A. Holloway, and L.A. Tarr Effect of heat treatment on microcrack healing behaviour of a machinable dental ceramic J Biomed Mater Res (Appl Biomater) 48 1999 791 796
20. K.J. Anusavice, and A.C.S. Gray Influence of initial flaw size on crack growth in air-tempered porcelain J Dent Res 70 1991 131 136
21. H.Y. Chen, R. Hickel, J.C. Setcos, and K.H. Kunzelmann Effects of surface finish and fatigue testing on the frature strength of CAD-CAM and pressed-ceramic crowns J Prosthet Dent 82 1999 468 475
22. B. Hojjatie, and K.J. Anusavice Effects of initial temperature and tempering medium on thermal tempering of dental porcelains J Dent Res 72 1993 566 571
23. K.J. Anusavice, C. Shen, and R.B. Lee Strengthening of feldspathic porcelain by ion exchange and tempering J Dent Res 71 1992 1134 1138
24. D. Johnson-Walls, A.G. Evans, B.D. Marshall, and M.R. James Residual stresses in machined ceramic surfaces J Am Ceram Soc 69 1986 44 47
25. H. Baharav, B.-Z. Laufer, R. Pilo, and H.S. Cardash Effect of glaze thickness on the fracture toughness and hardness of alumina-reinforced porcelain J Prosthet Dent 81 1999 515 519
26. International Organization for Standardization. ISO 6872: 1995(E): Dental ceramics, 2nd ed., Geneva, Switzerland; 1995.
27. R. Morena, P.E. Lockwood, and C.W. Fairhurst Fracture toughness of commercial dental porcelains Dent Mater 2 1986 58 62
28. R.C. Garvie, and P.S. Nicholson Phase analysis in zirconia systems J Am Ceram Soc 55 1972 303 305
29. W. Weibull A statistical distribution function of wide application J Appl Mech 9 1951 293 297
30. K.J. Anusavice, and B. Hojjatie Effect of thermal tempering on strength and crack propagation behaviour of feldspathic porcelains J Dent Res 70 1991 1009 1013
31. V. Gross, and M.V. Swain Mechanical properties and microstructure of sintered and isostatically pressed yttria partially stabilized zirconia (Y-PSZ) J Aust Ceram Soc 22 1986 1 12
32. J. Mencík Strength and fracture of glass and ceramics 1992 Elsevier Amsterdam 314