Influence of contamination and cleaning on bond strength to modified zirconia

Dental Materials

Volumn 25, Issue 12, 2009, Pages 1541-1550

  Phark, Jin Ho ^a   Duarte Jr , Sillas ^a   Kahn, Harold ^a   Blatz, Markus B ^b   Sadan, Avishai ^c  

^a CASE WESTERN RESERVE UNIVERSITY   (United States)

^b UNIVERSITY OF PENNSYLVANIA SCHOOL OF DENTAL MEDICINE   (United States)

^c UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

Author keywords

Blood; Contamination; Die stone; Intaglio surface; Saliva; Shear bond strength; X ray photoelectron spectroscopy; Zirconia

Indexed keywords

BOND STRENGTH; CLEANING PROCEDURES; CLEANING PROTOCOLS; COMPOSITE CYLINDERS; DUAL CURING; EFFICIENT METHOD; ELEVATED LEVEL; GROUP 4; HUMAN BLOODS; INORGANIC CONTAMINANTS; INTAGLIO SURFACE; MICRO-MECHANICAL; MODIFIED SURFACES; OXIDE CERAMICS; SALIVA; SHEAR BOND STRENGTH; SHEAR BOND STRENGTHS; STATISTICAL ANALYSIS; THERMAL CYCLE; ULTRASONIC BATH; XPS;

BLOOD; BOND STRENGTH (MATERIALS); CALCIUM; CEMENTS; CERAMIC MATERIALS; CLEANING; CONTAMINATION; DIES; DISKS (MACHINE COMPONENTS); DISKS (STRUCTURAL COMPONENTS); ETHANOL; PHOSPHORIC ACID; PHOTOELECTRICITY; PHOTOIONIZATION; PHOTONS; POTASSIUM; RESINS; SHEAR STRENGTH; SILICA; SULFUR; ULTRASONIC CLEANING; ZIRCONIA; ZIRCONIUM;

X RAY PHOTOELECTRON SPECTROSCOPY;

BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CALCIUM SULFATE; MACROGOL DERIVATIVE; PHOSPHORIC ACID; POLYMETHACRYLIC ACID DERIVATIVE; RELYX ARC; RESIN; RESIN CEMENT; TPH HYBRID; WATER; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; BLOOD; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL CARE; ELECTRON PROBE MICROANALYSIS; EQUIPMENT; HEAT; HUMAN; INSTRUMENTATION; MALE; MATERIALS TESTING; MECHANICAL STRESS; RANDOMIZED CONTROLLED TRIAL; SALIVA; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTY; TIME; TOOTH PROSTHESIS; ULTRASOUND; X RAY PHOTOELECTRON SPECTROSCOPY;

ACID ETCHING, DENTAL; BISPHENOL A-GLYCIDYL METHACRYLATE; BLOOD; CALCIUM SULFATE; COMPOSITE RESINS; DENTAL BONDING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; ELECTRON PROBE MICROANALYSIS; EQUIPMENT CONTAMINATION; HOT TEMPERATURE; HUMANS; MALE; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; PHOSPHORIC ACIDS; PHOTOELECTRON SPECTROSCOPY; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SALIVA; SHEAR STRENGTH; STRESS, MECHANICAL; SURFACE PROPERTIES; TIME FACTORS; ULTRASONICS; WATER; ZIRCONIUM;

EID: 70350573340     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.07.007     Document Type: Article

References (43)

1. Blatz M.B., Sadan A., and Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 89 (2003) 268-274
2. Zhang Y., Lawn B.R., Malament K.A., Van Thompson P., and Rekow E.D. Damage accumulation and fatigue life of particle-abraded ceramics. Int J Prosthodont 19 (2006) 442-448
3. Zhang Y., Lawn B.R., Rekow E.D., and Thompson V.P. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B: Appl Biomater 71 (2004) 381-386
4. Blatz M.B., Sadan A., Martin J., and Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 91 (2004) 356-362
5. Kern M., and Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
6. Luthy H., Loeffel O., and Hammerle C.H. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 22 (2006) 195-200
7. Wegner S.M., and Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2 (2000) 139-147
8. Wolfart M., Lehmann F., Wolfart S., and Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 23 (2007) 45-50
9. Valandro L.F., Ozcan M., Bottino M.C., Bottino M.A., Scotti R., and Bona A.D. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning. J Adhes Dent 8 (2006) 175-181
10. Phark J.H., Duarte Jr. S., Blatz M., and Sadan A. An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. J Prosthet Dent 101 (2009) 29-38
11. El Zohairy A.A., De Gee A.J., Hassan F.M., and Feilzer A.J. The effect of adhesives with various degrees of hydrophilicity on resin-ceramic bond durability. Dent Mater 20 (2004) 778-787
12. Hahn P., Attin T., Grofke M., and Hellwig E. Influence of resin cement viscosity on microleakage of ceramic inlays. Dent Mater 17 (2001) 191-196
13. Aboush Y.E. Removing saliva contamination from porcelain veneers before bonding. J Prosthet Dent 80 (1998) 649-653
14. Quaas A.C., Yang B., and Kern M. Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater 23 (2007) 506-512
15. Swift B., Walls A.W., and McCabe J.F. Porcelain veneers: the effects of contaminants and cleaning regimens on the bond strength of porcelain to composite. Br Dent J 179 (1995) 203-208
16. Yang B., Lange-Jansen H.C., Scharnberg M., Wolfart S., Ludwig K., Adelung R., et al. Influence of saliva contamination on zirconia ceramic bonding. Dent Mater 24 (2008) 508-513
17. Yang B., Scharnberg M., Wolfart S., Quaas A.C., Ludwig K., Adelung R., et al. Influence of contamination on bonding to zirconia ceramic. J Biomed Mater Res B: Appl Biomater 81 (2007) 283-290
18. Yang B., Wolfart S., Scharnberg M., Ludwig K., Adelung R., and Kern M. Influence of contamination on zirconia ceramic bonding. J Dent Res 86 (2007) 749-753
19. Duarte S.J., Lolato A.L., de Freitas C.R., and Dinelli W. SEM analysis of internal adaptation of adhesive restorations after contamination with saliva. J Adhes Dent 7 (2005) 51-56
20. Burke F.J., Main J.R., and Watts D.C. Glove contamination of etched porcelain surfaces and bond strength to enamel. Am J Dent 9 (1996) 40-42
21. Bishara S.E., Olsen M.E., Damon P., and Jakobsen J.R. Evaluation of a new light-cured orthodontic bonding adhesive. Am J Orthod Dentofacial Orthop 114 (1998) 80-87
22. Cacciafesta V., Sfondrini M.F., Baluga L., Scribante A., and Klersy C. Use of a self-etching primer in combination with a resin-modified glass ionomer: effect of water and saliva contamination on shear bond strength. Am J Orthod Dentofacial Orthop 124 (2003) 420-426
23. Eiriksson S.O., Pereira P.N., Swift Jr. E.J., Heymann H.O., and Sigurdsson A. Effects of saliva contamination on resin-resin bond strength. Dent Mater 20 (2004) 37-44
24. Eiriksson S.O., Pereira P.N., Swift E.J., Heymann H.O., and Sigurdsson A. Effects of blood contamination on resin-resin bond strength. Dent Mater 20 (2004) 184-190
25. van Schalkwyk J.H., Botha F.S., van der Vyver P.J., de Wet F.A., and Botha S.J. Effect of biological contamination on dentine bond strength of adhesive resins. SADJ 58 (2003) 143-147
26. Rosenstiel S., Land M., and Fujimoto J. Contemporary fixed prosthodontics. 4th ed. (2006), Mosby, St. Louis
27. Millstein P.L., Ho J.C., Naim W., and Nathanson D. Effect of a silicone fit-indicator on crown retention in vitro. J Prosthet Dent 62 (1989) 510-511
28. Szep S., Schmid C., Weigl P., Hahn L., and Heidemann D. Effect of the silicone disclosing procedure on the shear bond strength of composite cements to ceramic restorations. J Prosthet Dent 89 (2003) 60-65
29. Tenovuo J., and Lagerlöf F. Saliva. In: Thylstrup A., and Fejerskov O. (Eds). Textbook of clinical cariology (1994), Copenhageen, Munksgaard 17-43
30. Hannig M. Transmission electron microscopic study of in vivo pellicle formation on dental restorative materials. Eur J Oral Sci 105 (1997) 422-433
31. Milleding P., Carlen A., Wennerberg A., and Karlsson S. Protein characterisation of salivary and plasma biofilms formed in vitro on non-corroded and corroded dental ceramic materials. Biomaterials 22 (2001) 2545-2555
32. Moulder J., Stickle W., Sobol P., and Bomben K. Handbook of X-ray photoelectron spectroscopy (1992), Perkin-Elmer, Eden-Prairie
33. Craig D., and Powers J. Restorative dental materials (2002), Mosby, St. Louis
34. MSDS. Stone die & plaster hardener-resin or thinner (2005), George Taub Products & Fusion Co. Inc., Jersey City
35. Cacciafesta V., Jost-Brinkmann P.G., Sussenberger U., and Miethke R.R. Effects of saliva and water contamination on the enamel shear bond strength of a light-cured glass ionomer cement. Am J Orthod Dentofacial Orthop 113 (1998) 402-407
36. Derand T., Molin M., Kleven E., Haag P., and Karlsson S. Bond strength of luting materials to ceramic crowns after different surface treatments. Eur J Prosthodont Restor Dent 16 (2008) 35-38
37. Matinlinna J.P., Lassila L.V., and Vallittu P.K. Evaluation of five dental silanes on bonding a luting cement onto silica-coated titanium. J Dent 34 (2006) 721-726
38. Della Bona A., Anusavice K.J., and Hood J.A. Effect of ceramic surface treatment on tensile bond strength to a resin cement. Int J Prosthodont 15 (2002) 248-253
39. Anusavice K.J., Dehoff P.H., and Fairhurst C.W. Comparative evaluation of ceramic-metal bond tests using finite element stress analysis. J Dent Res 59 (1980) 608-613
40. DeHoff P.H., Anusavice K.J., and Wang Z. Three-dimensional finite element analysis of the shear bond test. Dent Mater 11 (1995) 126-131
41. Van Noort R., Noroozi S., Howard I.C., and Cardew G. A critique of bond strength measurements. J Dent 17 (1989) 61-67
42. Blatz M.B., Sadan A., Soignet D., Blatz U., Mercante D., and Chiche G. Long-term resin bond to densely sintered aluminum oxide ceramic. J Esthet Restor Dent 15 (2003) 362-368 [discussion 369]
43. Peumans M., Hikita K., De Munck J., Van Landuyt K., Poitevin A., Lambrechts P., et al. Bond durability of composite luting agents to ceramic when exposed to long-term thermocycling. Oper Dent 32 (2007) 372-379