Biomechanical modeling of acetabular component polyethylene stresses, fracture risk, and wear rate following press-fit implantation

Journal of Orthopaedic Research

Volumn 27, Issue 11, 2009, Pages 1467-1472

  Ong, Kevin L ^a,b   Rundell, Steve ^a,b   Liepins, Imants ^c   Laurent, Ryan ^c   Markel, David ^d   Kurtz, Steven M ^a,b  

^a EXPONENT INC   (United States)

^b DREXEL UNIVERSITY   (United States)

^c STRYKER ORTHOPAEDICS   (United States)

^d PROVIDENCE HOSPITAL   (United States)

Author keywords

Deformation; Finite element; Polyethylene; THA; Wear

Indexed keywords

POLYETHYLENE;

ACETABULUM FRACTURE; ARTICLE; CONTACT STRESS; CONTROLLED STUDY; EXPERIMENTAL MODEL; IMPLANTATION; PRESS FIT IMPLANTATION; PRIORITY JOURNAL;

ACETABULUM; ARTHROPLASTY, REPLACEMENT, HIP; EQUIPMENT FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; HIP PROSTHESIS; HUMANS; POLYETHYLENES; PROSTHESIS DESIGN; PROSTHESIS FAILURE; STRESS, MECHANICAL;

EID: 70350228619     PISSN: 07360266     EISSN: None     Source Type: Journal    
DOI: 10.1002/jor.20918     Document Type: Article

References (33)

1. Phillips CB, Barrett JA, Losina E, et al. 2003. Incidence rates of dislocation, pulmonary embolism, and deep infection during the first six months after elective total hip replacement. J Bone Joint Surg Am 85-A:20-26. (Pubitemid 36537968)
2. von Knoch M, Berry DJ, Harmsen WS, et al. 2002. Late dislocation after total hip arthroplasty. J Bone Joint Surg Am 84-A:1949-1953. (Pubitemid 35283358)
3. Alberton GM, High WA, Morrey BF. 2002. Dislocation after revision total hip arthroplasty: an analysis of risk factors and treatment options. J Bone Joint Surg Am 84-A:1788-1792.
4. Burroughs BR, Hallstrom B, Golladay GJ, et al. 2005. Range of motion and stability in total hip arthroplasty with 28-, 32-, 38-, and 44-mm femoral head sizes. J Arthroplasty 20:11-19. (Pubitemid 40127098)
5. Maloney WJ. 2003. Orthopaedic crossfire-larger femoral heads: a triumph of hope over reason! In opposition. J Arthroplasty 18:85-87. (Pubitemid 36542567)
6. Hozack WJ, Mesa JJ, Carey C, et al. 1996. Relationship between polyethylene wear, pelvic osteolysis, and clinical symptomatology in patients with cementless acetabular components. A framework for decision making. J Arthroplasty 11:769-772.
7. Burroughs BR, Rubash HE, Harris WH. 2002. Femoral head sizes larger than 32 mm against highly cross-linked polyethylene. Clin Orthop Relat Res:150-157.
8. Dumbleton JH, D'Antonio JA, Manley MT, et al. 2006. The basis for a second-generation highly cross-linked UHMWPE. Clin Orthop Relat Res 453:265-271.
9. Muratoglu OK, Bragdon CR, O'Connor D, et al. 2001. Larger diameter femoral heads used in conjunction with a highly cross-linked ultra-high molecular weight polyethylene: a new concept. J Arthroplasty 16:24-30. (Pubitemid 33151043)
10. Herrera LL, Essner A, Longaray J, et al. 2007. Hip simulator evaluation of the effect of femoral head size and liner thickness on the wear of sequentially crosslinked acetabular liners. 53rd Annual Meeting of the Orthopaedic Research Society.
11. Jin ZM, Meakins S, Morlock MM, et al. 2006. Deformation of press-fitted metallic resurfacing cups. Part 1: Experimental simulation. Proc Inst Mech Eng [H] 220:299-309.
12. Squire M, Griffin WL, Mason JB, et al. 2006. Acetabular component deformation with press-fit fixation. J Arthroplasty 21:72-77. (Pubitemid 44293251)
13. Bartel DL, Burstein AH, Toda MD, et al. 1985. The effect of conformity and plastic thickness on contact stresses in metal-backed plastic implants. J Biomech Eng 107:193-199.
14. Plank GR, Estok DM 2nd, Muratoglu OK, et al. 2007. Contact stress assessment of conventional and highly crosslinked ultra high molecular weight polyethylene acetabular liners with finite element analysis and pressure sensitive film. J Biomed Mater Res B Appl Biomater 80:1-10.
15. Maxian TA, Brown TD, Pedersen DR, et al. 1996. The Frank Stinchfield Award. 3-Dimensional sliding/contact computational simulation of total hip wear. Clin Orthop Relat Res 333:41-50.
16. Saito S, Ryu J, Seki M, et al. 2008. Analysis and results of dissociation of the polyethylene liner in the Harris-Galante I acetabular component. J Arthroplasty 23:522-526. (Pubitemid 351749566)
17. Tower SS, Currier JH, Currier BH, et al. 2007. Rim cracking of the cross-linked longevity polyethylene acetabular liner after total hip arthroplasty. J Bone Joint Surg Am 89:2212-2217.
18. Perron M, Malouin F, Moffet H, et al. 2000. Three-dimensional gait analysis in women with a total hip arthroplasty. Clin Biomech (Bristol, Avon) 15:504-515. (Pubitemid 30265504)
19. Bergstrom JS, Rimnac CM, Kurtz SM. 2005. Molecular chain stretch is a multiaxial failure criterion for conventional and highly crosslinked UHMWPE. J Orthop Res 23:367-375.
20. Kurtz SM, Bergstrom JS, Bowden AE, et al. 2007. Validation of hybrid model and ultimate chain stretch criterion for a second-generation highly crosslinked UHMWPE. In: 6th Combined Meeting of the Orthopaedic Research Societies, Honolulu, HI, p 498.
21. Sobieraj MC, Kurtz SM, Wang A, et al. 2008. Notched stresss-train behavior of a conventional and a sequentially annealed highly crosslinked UHMWPE. Biomaterials 29:4575-4583.
22. Kurtz SM, Edidin AA, Bartel DL. 1997. The role of backside polishing, cup angle, and polyethylene thickness on the contact stresses in metal-backed acetabular components. J Biomech 30:639-642.
23. Kim YS, Brown TD, Pedersen DR, et al. 1995. Reamed surface topography and component seating in press-fit cementless acetabular fixation. J Arthroplasty 10(Suppl):S14-S21.
24. MacKenzie JR, Callaghan JJ, Pedersen DR, et al. 1994. Areas of contact and extent of gaps with implantation of oversized acetabular components in total hip arthroplasty. Clin Orthop Relat Res 298:127-136.
25. Schwartz JT Jr, Engh CA, Forte MR, et al. 1993. Evaluation of initial surface apposition in porous-coated acetabular components. Clin Orthop Relat Res 293:174-187.
26. Alexander JW, Kamaric E, Noble PC. 1999. The accuracy of acetabular reaming in total hip replacement. In: 45th Annual Meeting of the Orthopaedic Research Society, Anaheim, CA, p 906.
27. Berli BJ, Ping G, Dick W, et al. 2007. Nonmodular flexible press-fit cup in primary total hip arthroplasty: 15-year followup. Clin Orthop Relat Res 461:114-121. (Pubitemid 47344102)
28. Howard JL, Hui AJ, Bourne RB, et al. 2005. Computed tomographic analysis of bone support for three acetabular cup designs. Clin Orthop Relat Res 434:163-169.
29. Ong KL, Lehman J, Notz WI, et al. 2006. Acetabular cup geometry and bone- interference have more influence on initial periprosthetic joint space than joint loading and surgical cup insertion. J Biomech Eng 128:169-175.
30. Kim YH, Yoon SH, Kim JS. 2007. Changes in the bone mineral density in the acetabulum and proximal femur after cementless total hip replacement: alumina-on-alumina versus alumina-on-polyethylene articulation. J Bone Joint Surg Br 89: 174-179.
31. Wright JM, Pellicci PM, Salvati EA, et al. 2001. Bone density adjacent to press-fit acetabular components. A prospective analysis with quantitative computed tomography. J Bone Joint Surg Am 83-A:529-536.
32. Crowninshield RD, Maloney WJ, Wentz DH, et al. 2004. Biomechanics of large femoral heads: what they do and don't do. Clin Orthop Relat Res 429:102-107.
33. Kennedy JG, Rogers WB, Soffe KE, et al. 1998. Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. J Arthroplasty 13:530-534.