Rapid prototyping to produce porous scaffolds with controlled architecture for possible use in bone tissue engineering

Virtual Prototyping and Bio Manufacturing in Medical Applications

Volumn , Issue , 2008, Pages 171-206

  Woesz, Alexander ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 70349683640     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-68831-2_9     Document Type: Chapter

References (65)

1. Ang, T. H . , Sultana, F. S.A. , Hutmacher, D .W. , Wong, Y. S., Fuh, J. Y. H ., Mo, X. M ., Loh, H. T. , Burdet, E . and Teoh, S. H . , Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispersing system, Mater Sci Eng, C20, 35-42, 2002
2. Bartolo, P., Mendes, A. and Jardini, A., Bio-prototyping, in Design and Nature II, Edited by M.W. Collins and C.A. Brebbia, WIT Press, Southampton, UK, 535-543, 2004
3. Bartolo, P.J. and Mitchell, G., Stereo-thermal-lithography, Rapid Prototyping J, 9(3), 150-156, 2003
4. Bartolo, P.J., State of the art of solid freeform fabrication for soft and hard tissue engineering, in Design and nature III: comparing design in nature with science and engineering, 233-243, 2006.
5. Bertsch, A., Jiguet, S., Bernhards, P. and Renaud, P., Microstereolithography: a review. Mat Res Soc Symp Proc, 758: LL.1.1.1-13, 2003.
6. Boland, T., Tao, X., Damon, B.J., Manley, B. and Kesari, P., Drop-on-demand printing of cells and materials for designer tissue constructs, Mater Sci Eng: C 27(3), 372-376, 2007.
7. Carvalho, C., Landers, R., Mulhaupt, R., Hubner, U. and Schmelzeisen, R., Fabrication of soft and hard biocompatible scaffolds using 3D-Bioplotting, in Virtual Modelling and Rapid Manufac turing - Advanced Research in Virtual and Rapid Prototyping, Edited by P.H. Bartolo et al. Taylor & Francis, London, UK, 2005.
8. Chu, T.-M.G., Halloran, J.W., Hollister, S.J. and Feinberg, S.E., Hydroxyapatite implants with designed internal architecture, J Mater Sci: Mater Med, 12, 471-478, 2001.
9. Cooke, M.N., Fisher, J.P., Dean, D., Rimnac, C., Mikos, A.G., Use of stereolithography to manu facture critical-sized 3D biodegradable scaffolds for bone ingrowth, J Biomed Mater Res Part B: Appl Biomater, 64B, 65-69, 2002
10. Crump, S.S., Apparatus and method for creating three-dimensional objects, US Pat. 5, 121-329, 1989
11. Fischer, J.P., Dean, D., Engel, P.S., Mikos, A., Photoinitiated polymerization of biomaterials, Annu Rev Mater Res, 31, 171-181, 2001.
12. Freyman, T.M., Yannas, I.V. and Gibson, L.J., Cellular materials as porous scaffolds for tissue engineering, Progress in Mate Sci, 46, 273-282, 2001.
13. Fuchs, J.R., Nasseri, B.A. and Vacanti, J.P., Tissue engineering: a 21st century solution to surgical reconstruction, Ann Thorac Surg, 72, 577-581, 2001.
14. Gomes, M.E. and Reis, R.L., Biodegradable polymers and composites in biomedical applications: from catgut to tissue engineering. Part 2 Systems for temporary replacement and advanced tissue regeneration, Int Materials Rev, 49, 274-285, 2004.
15. Griffith, M.L. and Halloran, J.W., Freeform fabrication of ceramics via stereolithography, Jam Ceram Soc, 79, 2601-2608, 1996.
16. Ho, M.H., Kuo, P.Y., Hsieh, H.J., Hsien, T.Y., Hou, L.T., Lai, J.Y. and Wang, D.W., Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods, Biomaterials, 25, 129-138, 2004.
17. Hutmacher, D.W., Schantz, T., Zein, I., Ng, K.W., Teoh, S.H. and Tan, K.C., Mechanical proper ties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modelling, JBiomedMaterRes, 55, 203-216, 2001.
18. Hynes, R.O., Integrins, versatility, modulation, and signalling in cell adhesion, Cell, 69, 11-25, 1992.
19. Kim, S.S., Utsunomiya, H., Koski, J.A., Wu, B.M., Cima, M.J., Sohn, J., Mukai, K., Griffith, L.G. and Vacanti, J.P., Survival and function of hepatocytes o a novel three-dimensional synthetic biodegradable polymer scaffolds with an intrinsic network of channels, Ann Surg, 228, 8-13, 1998.
20. Koh, Y.-H, Jun, I.-K. and Kim, H.-E., Fabrication of poly(e-caprolactone) /hydroxyapatite scaffold using rapid direct deposition, Materials Letters, 60, 1184-1187, 2006.
21. Kowata, S. and Sun, H.B., Two-photon photopolymerization as a tool for making micro-devices, Appl Surf Sci 208/209, 153-158, 2003.
22. Lam, C.X.F., Mo, X.M., Teoh, S.H. and Hutmacher, D.W., Scaffold development using 3D printing with a starch-based polymer, Mater Sci Eng, 20, 49-56, 2002.
23. Langer, R., Tissue engineering: a new field and its challenges, Pharm Res, 14, 840-841, 1997.
24. Langer, R. and Vacanti, J.P., Tissue engineering, Science, 260, 920-926, 1993.
25. Lee, G. and Barlow, J.W., Selective laser sintering of bioceramic materials for implants, Proceed ings of the '96 SFF Symposium, Austin, TX, August 12-14, 1996.
26. Lemercier, G., Mulatier, J.C., Martineau, C., Anemian, R., Andraud, C., Wang, I., Stephan, O., Amari, N. and Baldeck, P., Two-photon absorption: from optical limiting to 3D microfabrica-tion, Comptes Rendus Chimie, 8, 1308-1316, 2005.
27. Leong, K.F., Cheah, C.M. and Chua, C.K., Solid freeform fabrication of the three-dimensional scaffolds for engineering replacement tissues and organs, Biomaterials, 24, 2363-2378, 2003
28. Leukers, B., Gulkan, H., Irsen, S.H., Milz, S., Tille, C., Schieker, M. and Seitz, H., Hydroxyap-atite scaffolds for bone tissue engineering made by 3D printing, J Mater Sci Mater Med, 16, 1121-1124, 2005.
29. Levy, R.A., Chu, T.G.M., Holloran, J.W., Feinberg, S.E. and Hollister, S., CT-generated porous hydroxyapatite orbital floor prosthesis as a prototype bioimplant, Am J Neuroradiol, 18, 1522-1525, 1997.
30. Limpanuphap, S. and Derby, B., Manufacture of biomaterials by a novel printing process, JMater Sci Mater Med, 13, 1163-1166, 2002.
31. Mahajan, H. P., Evaluation of chitosan gelatine complex scaffolds for articular cartilage tissue engineering, MSc Thesis, Mississipi State University, USA, 2005.
32. Marler, J.J., Upton, J., Langer, R. and Vacanti, J.P., Transplantation of cells in matrices for tissue regeneration, Adv Drug Del Rev, 33, 165-182, 1998.
33. Matsuda, T. and Mizutani, M., Liquid acrylate-endcapped poly(e-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs, JBiomedMaterRes, 62, 395-403, 2002.
34. Miranda, P., Saiz, E., Gryn, K. and Tomsia, A.P., Sintering and robocasting of P-tricalcium phos phate scaffolds for orthopaedic applications, Acta Biomaterialia, 2, 457-466, 2006.
35. Mironov, V., Boland, T., Trusk, T., Forgacs, G. and Markwald, R.R., Organ printing: computer-aided jet-based 3D tissue engineering, Trends Biotechnol, 21, 157-161, 2003.
36. Mooney, D.J., Baldwin, D.F., Suh, N.P., Vacanti, J.P. and Langer, R., Novel approach to fabri cate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents, Biomaterials, 17, 1417-1422, 1996.
37. Moroni, L., Schotel, R., Sohier, J., Wijn, J.R. and Blitterswijk, C.A., Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness, Biomaterials, 27, 5918-5926, 2006.
38. Nathan, C. and Sporn, M., Cytokines in context, JCellBiol, 113, 981-986, 1991.
39. O'Brien, F.J., Harley, B.A., Llanas, I.V. and Gibson, L.J., The effect of pore size on cell adhesion in collagen-GAG scaffolds, Biomaterials, 26, 433- 441, 2005.
40. Pardo, L., Wilson, W.C. and Boland, T., Characterization of patterned self-assembled monolayers and protein arrays generated by the ink-jet method, Langmuir, 19, 1462-1466, 2003.
41. Park, A., Wu, B. and Griffith, L.G., Integration of surface modification and 3D fabrication tech niques to prepare patterned poly(L-lactide) substrates allowing regionally selective cell adhe sion, JBiomater Sci-Polym E, 9, 89-110, 1998.
42. Pfister, A., Landers, R., Laib, A., Hiibner, U., Schmelzeisen, R., Miilhaupt, Biofunctional rapid prototyping for tissue-engineering applications: 3D bioplotting versus 3D printing, Journal of Applied Polymer Science Part A: Polymer Chemistry, 42, 624-638, 2004.
43. Popov, V.K., Antonov, E.N., Bagratashvili, B.N., Konovalov, A.N. and Howdle, S.M., Selective laser sintering of 3-D biodegradable scaffolds for tissue engineering, Mat Res Soc Symp Proc., EXS-1,F5.4.1-F.5.4.3, 2004.
44. Reignier, J. and Huneault, M.A., Preparation of interconnected poly(e-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching, Polymer, 47, 4703-4717, 2006.
45. Sachlos, E., Reis, N., Ainsley, C., Derby, B. and Czernuszka, J.T., Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication, Biomaterials, 24, 1487-1497, 2003.
46. Sachs, E.M., Haggerty, J.S, Cima, M.S. and Williams, P.A., Three-dimensional printing techniques, US Pat. 520, 40-55, 1989.
47. Saiz, E., Gremillard, L., Menendez, G., Miranda, P., Gryn, K and Tomsia, A.P., Preparation of porous hydroxyapatite scaffolds, Materials Science and Engineering C, 27, 546-550, 2007.
48. Saunders, R., Derby, B., Gough, J. and Reis, N., Ink-jet printing of human cells, Mat Res Soc Symp Proc, EXS-1, F.6.3.1-F.6.3.3, 2004.
49. Skalak, R. and Fox, C.F., Tissue engineering, Alan R. Liss, New York, 1988.
50. Tabata, Y., Recent progress in tissue engineering, Drug Discov Today, 6, 483-487, 2001.
51. Taboas, J.M., Maddox, R.D., Krebsbach, P.H. and Hollister, S.J., Indirect solid free form fabri cation of local and global porous biomimetic and composite 3D polymer-ceramic scaffolds, Biomaterials, 24, 181-194, 2003.
52. Tellis, B.C., Szivek, J.A., Bliss, C.L., Margolis, D.S., Vaidyanathan, R.K. and Calvert, P., Trabecu-lar scaffolds created using micro CT guided fused deposition modeling, Materials Science and Engineering C (2007).
53. Tormen, M., Businaro, L., Altissimo, M., Romanato, F., Cabrini, S., Perennes, F., Proitti, R., Sun, H.B., Kawata, S., Fabrizio, E.D., 3D patterning by means of nanoimprinting, X-ray and two-photon lithography, Microelectronic Engineering, 73/74, 535-541 2004.
54. Vozzi, G., Flaim, C., Ahluwalia, A. and Bhatia, S., Fabrication of PLGA scaffolds using soft lithog raphy and microsyringe deposition, Biomaterials, 24, 2533-2540, 2003.
55. Wang, F., Shor, L., Darling, A., Khalil, S., Giigeri, S. and Lau, A., Precision deposition and char acterization of cellular poly-e-caprolactone tissue scaffolds, Rapid Prototyping J, 10, 42-49, 2004.
56. Wei, G., Jin, Q., Giannobile, W.V. and Ma, P.X., The enhancement of osteogenesis by nano-fibrous scaffolds incorporating rhBMP-7 nanospheres, Biomaterials, 2087-2096, 2007.
57. Whang, K., Thomas, C.H., Healy, K.E. and Nuber, G., A novel method to fabricate bioabsorbable scaffolds, Polymer, 36, 837-842, 1995.
58. Williams, J.M., Adewunmi, A., Schek, R.M., Flanagan, C.L., Krebsbach, P.H., Feinberg, S.E., Hollister, S.J. and Das, S., Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering, Biomaterials, 26, 4817-4827, 2005.
59. Woodfield, T.B.F., Malda, J., de Wijn, J., Peters, F., Riesle, J. and van Blitterswijk, C.A., Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique, Biomaterials, 25, 4149-4161, 2004.
60. Xiong, Z., Yan, Y. and Zhang, R. and Sun, L., Fabrication of porous poly(L-lactide acid) scaffolds for bone tissue engineering via precise extrusion, Scripta Materialia, 45, 773-779, 2001.
61. Xiong, Z., Yan, Y., Zhang, R. and Wang, X., Organism manufacturing engineering based on rapid prototyping principles, Rapid Prototyping J 11(3), 160-166, 2005.
62. Yan, Y., Wu, R. and Zhang, R, Biomaterial forming research using RP technology, Rapid Prototyping J, 9, 142-149, 2003a.
63. Yan, Y., Zhang, R. and Lin, F., Research and applications on bio-manufacturing, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 2003.
64. Zein, I., Hutmacher, D.W., Tan, K.C. and Teoh, S.H., Fused deposition modeling of novel scaffolds architectures fortissue engineering applications, Biomaterials, 23, 1169-1185, 2002.
65. Zeltinger, J., Sheerwood, J.K., Graham, D.M., Mueller, R. and Griffith, L.G., Effects of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition, Tissue Engineering,7(5), 557-572, 2001.