Constitutive model for densification of corn stover and switchgrass

Biosystems Engineering

Volumn 104, Issue 1, 2009, Pages 47-63

  Kaliyan, Nalladurai ^a   Morey, R Vance ^a  

^a UNIVERSITY OF MINNESOTA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BRIQUETS; COMPRESSIVE STRENGTH; CONSTITUTIVE MODELS; DENSIFICATION; ELASTIC MODULI; PARTICLE SIZE; PLANTS (BOTANY); STRAIN HARDENING; VISCOELASTICITY;

COMPRESSION BEHAVIOURS; FRICTIONAL LOSS; MODEL PARAMETERS; NATURAL STRAIN; PREHEATING TEMPERATURE; STRAIN-HARDENING EXPONENT; STRENGTH COEFFICIENTS; VISCOUS COEFFICIENTS;

STRAIN RATE;

PANICUM VIRGATUM; ZEA MAYS;

EID: 68349084622     PISSN: 15375110     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biosystemseng.2009.05.006     Document Type: Article

References (51)

1. Adapa P., Schoenau G., Tabil L., Sokhansanj S., and Singh A. Compression of fractionated sun-cured and dehydrated alfalfa chops into cubes: pressure and density models. Canadian Biosystems Engineering 47 3 (2005) 3.33-3.39
2. ASABE Standards. S269.4: Cubes, Pellets, and Crumbles - Definitions and Methods for Determining Density, Durability, and Moisture Content (2003), American Society of Agricultural and Biological Engineers (ASABE), St. Joseph, MI
3. Aydin I., Briscoe B.J., and Sanliturk K.Y. The internal form of compacted ceramic components: a comparison of a finite element modeling with experiment. Powder Technology 89 3 (1996) 239-254
4. Aydin I., Briscoe B.J., and Ozkan N. Modeling of powder compaction: a review. MRS Bulletin 22 12 (1997) 45-51
5. Bilanski W.K., and Graham V.A. A viscoelastic model for forage wafering. Transactions of the CSME 8 2 (1984) 70-76
6. Cunningham J.C., Sinka I.C., and Zavaliangos A. Analysis of tablet compaction. I. Characterization of mechanical behavior of powder and powder/tooling friction. Journal of Pharmaceutical Sciences 93 8 (2004) 2022-2039
7. DiMaggio F.L., and Sandler I.S. Material model for granular soils. Journal of Engineering Mechanics ASCE 96 (1971) 935-950
8. DOE. Biomass as Feedstock for a Bioenergy and Bioproducts Industry: the Technical Feasibility of a Billion-Ton Annual Supply (2005), U.S. Department of Energy (DOE), Office of Scientific and Technical Information, Oak Ridge, TN. (accessed 18.06.05)
9. Drucker D.C., and Prager W. Soil mechanics and plastic analysis or limit design. Quarterly of Applied Mathematics 10 2 (1952) 157-165
10. Faborode M.O., and O'Callaghan J.R. Theoretical analysis of compression of fibrous agricultural materials. Journal of Agricultural Engineering Research 35 3 (1986) 175-191
11. Faborode M.O., and O'Callaghan J.R. A rheological model for the compaction of fibrous agricultural materials. Journal of Agricultural Engineering Research 42 3 (1989) 165-178
12. Ferrero A., Horabik J., and Molenda M. Density-pressure relationships in compaction of straw. Canadian Agricultural Engineering 33 1 (1991) 107-111
13. Ghebre-Sellassie I. Mechanism of pellet formation and growth. In: Ghebre-Sellassie I. (Ed). Pharmaceutical Pelletization Technology (1989), Marcel Dekker, Inc., New York, NY 123-143
14. Graham V.A., and Bilanski W.K. Non-linear viscoelastic behavior during forage wafering. Transactions of the ASAE 27 6 (1984) 1661-1665
15. Haddad Y.M. Viscoelasticity of Engineering Materials (1995), Chapman & Hall, New York, NY
16. Heckel R.W. An analysis of powder compaction phenomena. Transactions of the Metallurgical Society of AIME 221 October (1961) 1001-1008
17. Huang L., and Puri V.M. A three-dimensional finite element model for powder compaction - time-dependent formulation and validation. Particulate Science and Technology 18 1 (2000) 257-274
18. Kaliyan N., and Morey R.V. Densification Characteristics of Corn Stover and Switchgrass. ASABE Paper No. 066174 (2006), American Society of Agricultural and Biological Engineers (ASABE), St. Joseph, MI
19. Kaliyan N., and Morey R.V. Factors affecting strength and durability of densified biomass products. Biomass and Bioenergy 33 3 (2009) 337-359
20. Kaliyan N., Morey R.V., White M.D., and Doering A. Roll press briquetting and pelleting of corn stover and switchgrass. Transactions of the ASABE 52 2 (2009) 543-555
21. Koval'chenko M.S. A rheological model of pressing of powders. Poroshkovaya Metallurgiya 333 9 (1990) 100-104
22. Li Y., Liu H., and Rockabrand A. Wall friction and lubrication during compaction of coal logs. Powder Technology 87 3 (1996) 259-267
23. Lobosco V., and Kaul V. An elastic/viscoplastic model of the fiber network stress in wet pressing: part 1. Nordic Pulp and Paper Research Journal 16 1 (2001) 12-17
24. Macleod H.M., and Marshall K. The determination of density distribution in ceramic compacts using autoradiography. Powder Technology 16 1 (1977) 107-122
25. Macosko C.W. Rheology: Principles, Measurements and Applications (1994), Wiley/VCH, Poughkeepsie, NY
26. Mani S; Roberge M; Tabil L G Jr.; Sokhansanj S (2003). Modeling of densification of biomass grinds using discrete element method by PFC3D. CSAE/SCGR 2003 Meeting Paper No. 03-207. In: CSAE/SCGR 2003 Meeting, Montreal, Quebec, Canada.
27. Mani S., Tabil L.G., and Sokhansanj S. Evaluation of compaction equations applied to four biomass species. Canadian Biosystems Engineering 46 3 (2004) 3.55-3.61
28. McLaughlin S.B., and Kszos L.A. Development of switchgrass (Panicum virgatum) as a bioenergy feedstock in the United States. Biomass and Bioenergy 28 6 (2005) 515-535
29. Michrafy A., Ringenbacher D., and Tschoreloff P. Modelling the compaction behavior of powders: application to pharmaceutical powders. Powder Technology 127 3 (2002) 257-266
30. Mittal B., and Puri V.M. Correlations between powder deposition methods and green compact quality, part II: compact quality and correlations. Particulate Science and Technology 17 4 (1999) 301-315
31. Mohsenin N.N. Physical Properties of Plant and Animal Materials (1986), Gordon and Breach Science Publishers, New York, NY
32. Mohsenin N., and Zaske J. Stress relaxation and energy requirements in compaction of unconsolidated materials. Journal of Agricultural Engineering Research 21 2 (1976) 193-205
33. Muñoz G., and Herrera P. Multidimensional Modeling of Agricultural Fibrous Materials in Densification: Compression Stage. ASAE Paper No. 023151 (2002), American Society of Agricultural and Biological Engineers (ASABE), St. Joseph, MI
34. O'Dogherty M.J. A review of the mechanical behavior of straw when compressed to high densities. Journal of Agricultural Engineering Research 44 (1989) 241-265
35. Panelli R., and Filho F.A. A study of a new phenomenological compacting equation. Powder Technology 114 1-3 (2001) 255-261
36. Peleg K. A rheological model of nonlinear viscoplastic solids. Journal of Rheology 27 5 (1983) 411-431
37. Peleg M., and Bagley E.B. Physical Properties of Foods (1983), AVI Publishing Company, Inc., Westport, CT
38. Pietsch W. Agglomeration Processes: Phenomena, Technologies, Equipment (2002), Wiley-VCH, Verlag GmbH, Weinheim
39. Raghavan J.K., and Conkle H.N. Physical characteristic measurements for reconstituted coal pellets. Proceedings of the Institute for Briquetting and Agglomeration (IBA) 22 (1991) 85-96
40. Rehkugler G.E., and Buchele W.F. Biomechanics of forage wafering. Transactions of the ASAE 12 1 (1969) 1-8
41. Ren S (1992). Thermo-hygro rheological behavior of materials used in the manufacture of wood-based composites. Ph.D. dissertation, Oregon State University, Corvallis, OR.
42. Rumpf H. The strength of granules and agglomerates. In: Knepper W.A. (Ed). Agglomeration (1962), John Wiley and Sons, New York, NY 379-419
43. Schofield A.N., and Wroth C.P. Critical State Solid Mechanics (1968), McGraw Hill, New York, NY
44. Sinka I.C., Cunningham J.C., and Zavaliangos A. The effect of wall friction in the compaction of pharmaceutical tablets with curved faces: a validation study of the Drucker-Prager Cap model. Powder Technology 133 1-3 (2003) 33-43
45. Sitkei G. Mechanics of Agricultural Materials (1986), Elsevier, New York, NY
46. Tabil L.G., and Sokhansanj S. Compression and compaction behavior of alfalfa grinds - I. Compression behavior. Powder Handling and Processing 8 1 (1996) 17-23
47. Takeuchi H., Nagira S., Yamamoto H., and Kawashima Y. Die wall pressure measurement for evaluation of compaction property of pharmaceutical materials. International Journal of Pharmaceutics 274 1-2 (2004) 131-138
48. Thoemen H., Haselein C.R., and Humphrey P.E. Modeling the physical processes relevant during hot pressing of wood-based composites. Part II. Rheology. Holz als Roh- und Werkstoff 64 2 (2006) 125-133
49. Tripodi M.A., Puri V.M., Manbeck H.B., and Messing G.L. Constitutive models for cohesive particulate materials. Journal of Agricultural Engineering Research 53 1 (1992) 1-21
50. Wu C.Y., Ruddy O.M., Bentham A.C., Hancock B.C., Best S.M., and Elliot J.A. Modelling the mechanical behavior of pharmaceutical powders during compaction. Powder Technology 152 1-3 (2005) 107-117
51. Zavaliangos A. Constitutive models for the simulation of P/M processes. The International Journal of Powder Metallurgy 38 2 (2002) 27-39