Modeling of powder compaction: A review

MRS Bulletin

Volumn 22, Issue 12, 1997, Pages 45-51

  Aydin, I ^a   Briscoe, B J ^a   Ozkan, N ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; DIES; FLOW OF FLUIDS; POWDERS; PRESSING (FORMING); PROCESS CONTROL; PRODUCT DESIGN;

POWDER COMPACTION;

COMPACTION;

EID: 0031373564     PISSN: 08837694     EISSN: None     Source Type: Journal    
DOI: 10.1557/S0883769400034746     Document Type: Article

References (46)

1. N. Ozkan, PhD dissertation, Imperial College, 1994.
2. Y. Morimoto, T. Hayashi, and T. Takei, Int. J. Powder Technol. 18 (2) (1982) p. 129.
3. H.A. Haggblad and M. Oldenburg, Modelling Simul. Mater. Sci. 2 (1994) p. 893.
4. N. Bontcheva and R. Iankov, in Materials by Powder Tech. PTM 93, edited by F. Aldinger (Informationsgesellschaft Verlag, Dresden, 1993) p. 941.
5. R.W. Lewis, A.G.K. Jinka, and D.T. Gethin, Pract. Mgt. 25 (6) (1993) p. 287.
6. H.A. Janssen, Z. Ver. Deutsch. Ing. 39 (1895) p. 1045.
7. D.M. Walker, Chem. Eng. Sci. 21 (1966) p. 975.
8. N. Ozkan and B.J. Briscoe, J. Eur. Ceram. Soc. 14 (1994) p. 143.
9. Ibid. 17 (1997) p. 17.
10. Ibid., Ceram. Int. in press.
11. M.Y. Bal'shin, Vestnik Metalloprom. 18 (2) (1938) p. 124.
12. R.W. Heckel, Trans. AIME 221 (1961) p. 671.
13. A.R. Cooper and L.E. Eaton, J. Am. Ceram. Soc. 45 (1962) p. 97.
14. K. Kawakita and K.H. Ludde, Powder Technol. 4 (1970/1971) p. 61.
15. Z. Mroz and O.C. Zeinkiewicz, in Me-chanics of Engineering Materials, edited by C.S. Desai and R.H. Gallagher (John Wiley & Sons, New York, 1984) p. 415.
16. J.J. Bhatt, M.M. Carroll, and J.F. Schatz, J. Appl. Mech. 42 (1972) p. 363.
17. M.M. Carroll, J. Eng. Mech. Div. ASCE EM5 (1980) p. 969.
18. D.J. Naylor, in Developments in Soil Mechanics, edited by C.R. Scott (Applied Science Publisher, London, 1978) p. 39.
19. N.P. Suh, Int. J. Powder Metall. 5 (1) (1969) p. 69.
20. S. Nemat-Nasser and N. Shokooh, Int. J. Sol. Structures 16 (1980) p. 495.
21. F.L. DiMaggio and I.S. Sandler, J. Eng. Mech. Div. ASCE 97 (1971) p. 935.
22. Y.M. Gupta, L. Seaman, and D.R. Curren, Quarterly Progress Report 3 (Stanford Research Institute, Menlo Park, CA, 1976).
23. M. Hehenberger and J.E. Crawford, Scand. J. Metall. 12 (1983) p. 285.
24. J.N. Johnson and S.J. Green, in The Effects of Voids on Materials Deformation, edited by S.C. Cowin and M.M. Carroll (ASME, 1976) p. 93.
25. P.A. Vermeer, Geotechnique 28 (4) (1978) p. 413.
26. F. Tatsuoka and K. Ishihara, Soils and Fdns. 15 (1) (1975) p. 29.
27. A. Schofield and C.P. Worth, Critical State Soil Mechanics (McGraw Hill, New York, 1968).
28. A.L. Gurson, J. Eng. Mater. Technol. 99 (1977) p. 2.
29. V. Tvergaard, Int. J. Fracture Mech. 17 (1981) p. 389.
30. P.A. Cundall and O.D.L. Strack, Geotechnique 29 (1) (1979) p. 47.
31. O.R. Walton, in Mechanics of Granular Materials: New Models and Constitutive Relations, edited by W.M. Jenkins and I. Satake (Elsevier Science Publishing, Amsterdam, 1983) p. 327.
32. S. Strijbos and P.A. Vermeer, in Materials Science Research, vol. 11 (Plenum Press, New York, 1978) p. 113.
33. A. Broese Van Groenou and R.C.D. Lissenburg, J. Am. Ceram. Soc. 66 (1983) p. C156.
34. D.V. Tran, R.W. Lewis, D.T. Gethin, and A.K. Ariffin, Powder Metall. 36 (4) (1993) p. 257.
35. I.M. Al-Khattat and S.T.S. Al-Hassani, Chem. Eng. Sci. 42 (4) (1987) p. 707.
36. M. Hehenberger, P. Samuelsen, O. Aim, L. Nilsson, and T. Olofsson, in Proc. IUTAM Conf. on Deformation and Failure of Granular Materials, edited by P.A. Vermeer and H.J. Luger (Delft, 1982) p. 381.
37. I. Aydin, B.J. Briscoe, and K.Y. Sanliturk, Comp. Mater. Sci. 3 (1994) p. 55.
38. I. Aydin, PhD dissertation, Imperial College, 1995.
39. I. Aydin, B.J. Briscoe, and K.Y. Sanliturk, Powder Technol. 89 (3) (1996) p. 239.
40. R. Kamm, M.A. Steinberg, and J. Wulff, Trans. AIME 171 (1947) p. 439.
41. D. Train, Trans. Inst. Chem. Eng. 35 (1957) p. 258.
42. H.M. MacLeod and K. Marshall, Powder Technol. 16 (1977) p. 107.
43. I. Aydin, B.J. Briscoe, and K.Y. Sanliturk, J. Eur. Ceram. Soc. 17 (10) (1997) p. 1201.
44. I. Aydin, B.J. Briscoe, and N. Ozkan, Int. J. Mach. Tools Mfg. 35 (2) (1995) p. 345.
45. N. Ozkan and B.J. Briscoe, Powder Technol. 86 (2) (1996) p. 201.
46. K.Y. Sanliturk, I. Aydin, and B.J. Briscoe, "A Finite Element Approach for the Shape Prediction of Ceramic Compacts During Sintering Process" (unpublished manuscript).