Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals

International Journal of Fatigue

Volumn 31, Issue 10, 2009, Pages 1476-1489

  Cavaliere, P ^a  

^a UNIVERSITY OF SALENTO   (Italy)

Author keywords

Fatigue crack initiation and growth; Low and high cycle fatigue; Mechanical properties; Ultra fine grain and nanocrystalline metals

Indexed keywords

ANGULAR PRESSING; CONTROLLED TESTS; CRACK BEHAVIOR; ELECTRODEPOSITED COBALT; FATIGUE BEHAVIOR; FATIGUE CRACK INITIATION; FATIGUE CRACK INITIATION AND GROWTH; FATIGUE LIMIT; FATIGUE PROPERTIES; GRAIN SIZE; GRAIN SIZE VARIATION; HIGH CYCLE FATIGUE; LOW AND HIGH CYCLE FATIGUE; MEAN-GRAIN SIZE; NANOCRYSTALLINE; PURE METALS; STRESS LEVELS; ULTRA FINE GRAIN; ULTRA-FINE GRAIN AND NANOCRYSTALLINE METALS;

COBALT; CRACK DETECTION; CRACK INITIATION; ELECTRODEPOSITION; FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; GRAIN GROWTH; GRAIN SIZE AND SHAPE; METALS; NANOCRYSTALLINE ALLOYS; NANOCRYSTALLINE MATERIALS; PRESSING (FORMING); STATISTICAL TESTS; STRAIN; STRESS CORROSION CRACKING; STRESSES; TENSILE STRENGTH; WELDS; YIELD STRESS;

MECHANICAL PROPERTIES;

EID: 67650999144     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2009.05.004     Document Type: Article

References (67)

1. Ebrahimi F., Bourne G.R., Kelly M.S., and Matthews T.E. Mechanical properties of nanocrystalline nickel produced by electrodeposition. Nanostruct Mater 11 (1999) 343-350
2. Hughes G.D., Smith S.D., Pande C.S., Johnson H.R., and Armstrong R.W. Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel. Scripta Metall Mater 20 (1986) 93-97
3. Jang J.S.C., and Koch C.C. The Hall-Petch relationship in nanocrystalline iron produced by ball milling. Scripta Metall Mater 24 (1990) 1599-1604
4. Dalla Torre F., Van Swygenhoven H., and Victoria M. Nanocrystalline electrodeposited Ni: microstructure and tensile properties. Acta Mater 50 (2002) 3957-3970
5. Gleiter H. Nanocrystalline materials. Prog Mater Sci 33 (1989) 223-315
6. Koch C.C., and Narayan J. Structure and mechanical properties of nanophase materials - theory and computer simulation vs experiment. Mater Res Soc Proc 634 (2001) B5.1.1-B5.1.11
7. Nieh T.G., and Wadsworth J. Hall-Petch relation in nanocrystalline solids. Scripta Metall Mater 25 (1991) 955-958
8. Schiotz J., and Jacobsen K.W. A maximum in the strength of nanocrystalline copper. Science 301 (2003) 1357-1359
9. Schuh C.A., Nieh T.G., and Iwasaki H. The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni. Acta Mater 51 (2003) 431-443
10. Detor A.J., and Schuh C.A. Tailoring and patterning the grain size of nanocrystalline alloys. Acta Mater 55 (2007) 371-379
11. Jang D., and Atzmon M. Grain-size dependence of plastic deformation in nanocrystalline Fe. J Appl Phys 93 (2003) 9282-9286
12. Meyers M.A., Mishra A., and Benson D.J. The deformation physics of nanocrystalline metals: experiments, analysis, and computations. JOM 58 (2006) 41-48
13. Chokshi A.H., Rosen A., Karch J., and Gleiter H. On the validity of the Hall-Petch relationship in nanocrystalline materials. Scripta Metall Mater 23 (1989) 1679-1684
14. Conrad H. Grain-size dependence of the flow stress of Cu from millimeters to nanometers. Metall Mater Trans 35A (2004) 2681-2695
15. Weertman J.R. Hall-Petch strengthening in nanocrystalline metals. Mater Sci Eng A 166 (1993) 161-167
16. Dao M., Lu L., Asaro R.J., De Hosson J.T.M., and Ma E. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals. Acta Mater 55 (2007) 4041-4065
17. Koch C.C. Synthesis of nanostructured materials by mechanical milling: problems and opportunities. Nanostruct Mater 9 (1997) 13-22
18. Zhang X., Wang H., Scattergood R.O., Narayan J., and Koch C.C. Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling. Mater Sci Eng A 344 (2003) 175-181
19. Tellkamp V.L., Melmed A., and Lavernia E.J. Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy. Metall Mater Trans 32A (2001) 2335-2343
20. Zhou F., Liao X.Z., Zhu Y.T., Dallek S., and Lavernia E.J. Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling. Acta Mater 51 (2003) 2777-2791
21. Valiev R.Z., Islamgaliev R.K., and Alexandrov I.V. Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45 (2000) 103-189
22. Zhang D.L. Processing of advanced materials using high-energy mechanical milling. Prog Mater Sci 49 (2004) 537-560
23. Sanders P.G., Fougere G.E., Thompson L.J., Eastman J.A., and Weertman J.R. Improvements in the synthesis and compaction of nanocrystalline materials. Nanostruct Mater 8 (1997) 243-252
24. Sanders P.G., Eastman J.A., and Weertman J.R. Elastic and tensile behavior of nanocrystalline copper and palladium. Acta Mater 45 (1997) 4019-4025
25. Erb U. Electrodeposited nanocrystals: synthesis, properties and industrial applications. Nanostruct Mater 6 (1995) 533-538
26. El-Sharik A.M., Erb U., Palumbo G., and Aust K.T. Deviations from Hall-Petch behavior in as-prepared nanocrystalline nickel. Scripta Metall Mater 27 (1992) 1185-1188
27. Ebrahimi F., Zhai Q., and Kong D. Deformation and fracture of electrodeposited copper. Scripta Mater 39 (1998) 315-321
28. Chokshi A.H., Mukerjee A.K., and Langdon T.G. Superplasticity in advanced materials. Mater Sci Eng R10 (1993) 237-274
29. Furukawa M., Horita Z., Nemoto M., and Langdon T.G. The use of severe plastic deformation for microstructural control. Mater Sci Eng A 324 (2002) 82-89
30. Neishi K., Horita Z., and Langdon T.G. Grain refinement of pure nickel using equal channel angular pressing. Mater Sci Eng A 325 (2002) 54-58
31. Valiev R.Z., and Langdon T.G. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51 (2006) 881-981
32. Kumar K.S., Van Swygenhoven H., and Suresh S. Mechanical behavior of nanocrystalline metals and alloys. Acta Mater 51 (2003) 5743-5774
33. Zhu Y.T., and Langdon T.G. Influence of grain size on deformation mechanisms: an extension to nanocrystalline materials. Mater Sci Eng A 409 (2005) 234-242
34. Schwaiger R., Moser B., Dao M., Chollacoop N., and Suresh S. Some critical experiments on the strain rate sensitivity of nanocrystalline nickel. Acta Mater 51 (2003) 5159-5172
35. Yim T.H., Yoon S.C., and Kim H.S. Tensile properties of electrodeposited nanocrystalline nickel. Mater Sci Eng A 449-451 (2007) 836-840
36. Dalla Torre F., Spätig P., Schaublin R., and Victoria M. Deformation behaviour and microstructure of nanocrystalline electrodeposited and high pressure torsioned nickel. Acta Mater 53 (2005) 2337-2349
37. Ovid'ko I.A., and Sheinerman A.G. Triple junction nanocracks in deformed nanocrystalline materials. Acta Mater 52 (2004) 1201-1209
38. Hanlon T., Tabachnikova E.D., and Suresh S. Fatigue behavior of nanocrystalline metals and alloys. Int J Fatigue 27 (2005) 1147-1158
39. Agnew S.R., Vinogradov A.Y., Hashimoto S., and Weertman J.R. Overview of fatigue performance of Cu processed by severe plastic deformation. J Electron Mater 28 (1999) 1038-1044
40. Mughrabi H., and Höppel H.W. Cyclic deformation and fatigue properties of ultrafine grain size materials: current status and some criteria for improvement of the fatigue resistance. Mater Res Soc Symp Proc 634 (2001) B2.1.1-B2.1.12
41. Cavaliere P., and Cabibbo M. Effect of Sc and Zr additions on the microstructure and fatigue properties of AA6106 produced by equal-channel-angular-pressing. Mater Charact 59 (2008) 197-203
42. Wong M.K., Kao W.P., Lui J.Y., Chang C.P., and Kao P.W. Cyclic deformation of ultrafine-grained aluminum. Acta Mater 55 (2007) 715-725
43. Vinogradov A., and Hashimoto S. Fatigue of severely deformed metals. Adv Eng Mater 5 (2003) 351-358
44. Höppel H.W., and Valiev R.Z. On the possibilities to enhance the fatigue properties of ultrafine-grained metals. Z Metallkd 93 (2002) 641-648
45. Höppel H.W., Kautz M., Xu C., Murashkin M., Langdon T.G., Valiev R.Z., et al. An overview: fatigue behaviour of ultrafine-grained metals and alloys. Int J Fatigue 28 (2006) 1001-1010
46. Vinogradov A., Nagasaki S., Patlan V., Kitagawa K., and Kawazoe M. Fatigue properties of 5056 Al-Mg alloy produced by equal-channel angular pressing. Nanostruct Mater 11 (1999) 925-934
47. Patlan V., Vinogradov A., Higashi K., and Kitagawa K. Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing. Mater Sci Eng A 300 (2001) 171-182
48. Vinogradov A., Washikita A., Kitagawa K., and Kopylov V.I. Fatigue life of fine-grain Al-Mg-Sc alloys produced by equal-channel angular pressing. Mater Sci Eng A 349 (2003) 318-326
49. Vinogradov A. Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation. J Mater Sci 42 (2007) 1797-1808
50. Kunz L., Luḱǎs P., and Svoboda M. Fatigue strength, microstructural stability and strain localization in ultrafine-grained copper. Mater Sci Eng A 424 (2006) 97-104
51. Xu C., Wang Q., Zheng M., Li J., Huanga M., Jia Q., et al. Fatigue behavior and damage characteristic of ultra-fine grain low-purity copper processed by equal-channel angular pressing (ECAP). Mater Sci Eng 475 (2008) 249-256
52. Wu S.D., Wang Z.G., Jiang C.B., Li G.Y., Alexandrov I.V., and Valiev R.Z. Shear bands in cyclically deformed ultrafine grained copper processed by ECAP. Mater Sci Eng A 387-389 (2004) 560-564
53. Lukas P., Kunz L., and Svodoba M. Effect of low temperature on fatigue life and cyclic stress-strain response of ultrafine-grained copper. Metall Mater Trans 38A (2007) 1910-1915
54. Li X.W., Umakoshi Y., Wu S.D., Wang Z.G., Alexandrov I.V., and Valiev R.Z. Temperature effects on the fatigue behavior of ultrafine-grained copper produced by equal channel angular pressing. Phys Status Solid 201 (2004) R119-R122
55. Vinogradov A., Stolyarov V.V., Hashimoto S., and Valiev R.Z. Cyclic behavior of ultrafine-grain titanium produced by severe plastic deformation. Mater Sci Eng A 318 (2001) 163-173
56. Vinogradov A., Hashimoto S., and Kopylov V.I. Enhanced strength and fatigue life of ultra-fine grain Fe/36Ni Invar alloy. Mater Sci Eng A 355 (2003) 277-285
57. Chapetti M.D., Miyata H., Tagawa T., Miyata T., and Fujioka M. Fatigue crack propagation behaviour in ultra-fine grained low carbon steel. Int J Fatigue 27 (2005) 235-243
58. Kim H.K., Choi M.I., Chung C.S., and Shin D.H. Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing. Mater Sci Eng A 340 (2003) 243-250
59. Ovid'ko I.A. Review on the fracture processes in nanocrystalline materials. J Mater Sci 42 (2007) 1694-1708
60. Hasnaoui A., Van Swygenhoven H., and Derlet P.M. Dimples on nanocrystalline fracture surfaces as evidence for shear plane formation. Science 300 (2003) 1550-1552
61. Yamakov V., Saether E., Phillips D.R., and Glaessgen E.H. Molecular-dynamics simulation-based cohesive zone representation of intergranular fracture processes in aluminum. J Mech Phys Solids 54 (2006) 1899-1928
62. Xie J., Wu X., and Hong Y. Shear bands at the fatigue crack tip of nanocrystalline nickel. Scripta Mater 57 (2007) 5-8
63. Karimpoor A.A., Erb U., Aus K.T., and Palumbo G. High strength nanocrystalline cobalt with high tensile ductility. Scripta Mater 49 (2003) 651-656
64. Zhang X., and Jia C. The microstructural characteristics of the deformed nanocrystalline cobalt. Mater Sci Eng A 418 (2006) 77-80
65. Kumar K.S., Suresh S., Chisholm M.F., Horton J.A., and Wang P. Deformation of electrodeposited nanocrystalline nickel. Acta Mater 51 (2003) 387-405
66. Suresh S. Fatigue of materials (1991), Cambridge University Press, Cambridge
67. Yang Y., Imasogie B., Fan G.J., Liaw P.K., and Soboyejo W.O. Fatigue and Fracture of a bulk nanocrystalline nife alloy. Metall Trans 29A (2008) 1145-1156