EBSD for analysing the twinning microstructure in fine-grained TWIP steels and its influence on work hardening

Journal of Microscopy

Volumn 235, Issue 1, 2009, Pages 67-78

  Barbier, D ^a,b   Gey, N ^a   Bozzolo, N ^a   Allain, S ^b   Humbert, M ^a  

^a UNIVERSITÉ PAUL VERLAINE METZ   (France)

^b ARCELORMITTAL   (France)

Author keywords

EBSD; Steel; Tensile deformation; Twinning; TWIP

Indexed keywords

HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; MICROSTRUCTURE; PLASTICITY; STEEL; TWINNING;

AVERAGE GRAIN SIZE; EBSD; ELECTRON BACKSCATTERED DIFFRACTION TECHNIQUES; FINE GRAINED; NANOTWINS; TENSILE DEFORMATION; TWINNING STRUCTURES; TWINNINGINDUCED PLASTICITY (TWIP) STEEL; TWIP; TWIP STEEL;

STRAIN HARDENING;

STEEL;

ARTICLE; ELECTRON DIFFRACTION; FIBER; GRAIN HARDNESS; NANOANALYSIS; PLASTICITY; PRIORITY JOURNAL; ROOM TEMPERATURE; STRESS STRAIN RELATIONSHIP; STRUCTURE ANALYSIS; TENSILE STRENGTH; TENSION; TRANSMISSION ELECTRON MICROSCOPY;

EID: 67650818744     PISSN: 00222720     EISSN: 13652818     Source Type: Journal    
DOI: 10.1111/j.1365-2818.2009.03182.x     Document Type: Article

References (35)

1. Adler, P.H., Olson, G.B. Owen, W.S. (1986) Strain hardening of Hadfield manganese steel. Metall. Mater. Trans. A 17A, 1725 1737. (Pubitemid 17459372)
2. Allain, S., Chateau, J.P., Bouaziz, O., Legros, M. Garat, X. (2002) Characterization of the mechanical twinning microstructure in a high manganese content austenitic steel. Proceeding of the Int. Conf. on TRIP-Aided High Strength Ferrous Alloys. Ghent, Belgium. GRIPS Proceeding.
3. Allain, S. (2004) Caractérisation et modélisation thermomécaniques multi-échelles des mécanismes de déformation et d'écrouissage d'aciers austénitiques à haute teneur en manganèse - application à l'effet TWIP. PhD Thesis, INPL, France.
4. Allain, S., Château, J.P., Bouaziz, O., Migot, S. Guelton, N. (2004) Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys. Mat. Sci. Eng. A-Struct. 387, 158 162. (Pubitemid 39644755)
5. Asgari, S., El-Danaf, E., Kalidindi, S.R. Doherty, R.D. (1997) Strain hardening regimes and microstructural evolutions during large strain compression of low stacking fault energy fcc alloys that form deformation twins. Metall. Mater. Trans. A 28A, 1781 1795. (Pubitemid 127742590)
6. Barbier, D., Gey, N., Allain, S., Bozzolo, N. Humbert, M. (2008) Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions. Mat. Sci. Eng. A-Struct. 500, 196 206.
7. Bouaziz, O., Allain, S. Scott, C. (2008) Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scripta Mater. 58, 484 487.
8. Bracke, L., Penning, J. Akdut, N. (2007) The influence of Cr and N additions on the mechanical properties of FeMnC steels. Metall. Mater. Trans. A 38A, 520 528. (Pubitemid 46951360)
9. Christian, J.W. Mahajan, S. (1995) Deformation twinning. Prog. Mater. Sci. 39, 1 157.
10. Dastur, Y.N. Leslie, W.C. (1981) Mechanism of work hardening in Hadfield manganese steel. Metall. Mater. Trans. A 12A, 749 759. (Pubitemid 11520305)
11. De Almeida, L.H., Le May, I. Emygdio, P.R.O. (1998) Mechanistic modeling of dynamic strain aging in austenitic stainless steels. Mater. Charact. 41-4, 137 150. (Pubitemid 128421047)
12. El-Danaf, E., Kalidindi, S.R. Doherty, R.D. (1999) Influence of grain size and stacking-fault energy on deformation twinning in fcc metals. Metall Mater Trans A 30A, 1223 1233.
13. Fanta, A.B. Zaefferer, S. (2008) Relationship between microstructure and texture evolutions during cold deformation of TWIP steels. Proceedings of the 15th Int. Conf. on Textures of Mater. ICOTOM 15, Pittsburgh, Pennsylvania.
14. Fundenberger, J.J., Morawiec, A., Bouzy, E. Lecomte, J.S. (2002) Polycrystal orientation maps from TEM. Ultramicroscopy 96, 127 137. (Pubitemid 36382908)
15. Fundenberger, J.J., Morawiec, A., Bouzy, E. Lecomte, J.S. (2003) System for creating orientation maps using TEM. Mater. Chem. Phys. 81, 535 537.
16. Grassel, O., Kruger, L., Frommeyer, G. Meyer, L.W. (2000) High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - applications. Int. J. Plasticity 16, 1391 1409. (Pubitemid 30930363)
17. Hamdi, F. Asgari, S. (2008) Evaluation of the role of deformation twinning in work hardening behavior of face-centered-cubic polycrystals. Metal. Mater. Trans. A 39A, 294 303.
18. Hull, D. (1961) The initiation of slip at the tip of a deformation twin in α-iron. Acta Metal. 9, 191 204.
19. Humphreys, F.J. (2001) Grain and subgrain characterization by electron backscatter diffraction. J. Mater. Sci. 36, 3833 3854.
20. Humphreys, F.J. (2004) Characterisation of fine-scale microstructures by electron backscatter diffraction. Scripta Mater. 51, 771 776.
21. Hutchinson, B. Ridley, N. (2006) On dislocation accumulation and work hardening in Hadfield steel. Scripta Mater. 55, 299 302. (Pubitemid 43831728)
22. Jorge-Badiola, D., Iza-Mendia, A. Gutiérrez I. (2007) Evaluation of intragranular misorientation parameters measured by EBSD in a hot worked austenitic stainless steel. J. Microsc. 228, 373 383. (Pubitemid 350191117)
23. Kalidindi, S.R. (1998) Modeling the strain hardening response of low SFE fcc alloys. Int. P. Plasticity 14, 1265 1277. (Pubitemid 128649644)
24. Kalidindi, S.R. (2001) Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals. Int. J. Plasticity 17, 837 860. (Pubitemid 32450564)
25. Karaman, I., Sehitoglu, H., Gall, K., Chumlyakov, Y. I. Maier, H.J. (2000) Deformation of single crystal Hadfield steel by twinning and slip. Acta Mater. 48, 1345 1359. (Pubitemid 30577711)
26. Mahajan, S. Chin, G.Y. (1973) Twin-slip, twin-twin and slip-twin interactions in Co-8 wt.% Fe alloy single crystals. Acta Metal. 21-2, 173 179.
27. Mason, T.A., Bingert, J.F., Kaschner, G.C., Wright, S.I. Larsen, R.J. (2002) Advances in deformation twin characterization using electron back scattered diffraction data. Metall. Mater. Trans. A 33-3, 949 954. (Pubitemid 34406092)
28. Meng, L., Yang, P., Xie, Q., Ding, H. Tang, Z. (2007) Dependence of deformation twinning on grain orientation in compressed high manganese steels. Scripta Mater. 56, 931 934. (Pubitemid 46528847)
29. Rémy L. (1978) Kinetics of fcc deformation twinning and its relationship to stress-strain behavior. Acta Metall. 26, 443 451. (Pubitemid 8596498)
30. Rémy L. (1981) The interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of fcc metals and alloys. Metall. Mater. Trans. A 12A, 387 408. (Pubitemid 11488892)
31. Salem, A.A., Kalidindi, S.R. Doherty, R.D. (2003) Strain hardening of titanium: role of deformation twinning, Acta Mater. 51-14, 4225 4237.
32. Schwarzer, R.A. (1991) A review of the analysis of local texture by electron diffraction. Texture Microstruct. 14, 241 244.
33. Scott, C., Guelton, N., Allain, S., Farral, M. Cugy, P. (2005) The development of a new Fe-Mn-C austenitic steel for automotive applications. Proceeding of the MS&T'05 Conference. Pittsburgh, Pennsylvania. MST.
34. Shun, T.S., Wan, C.M. Byrne, J.G. (1992) A study of work hardening in austenitic Fe-Mn-C and Fe-Mn-Al-C alloys. Acta. Metall. Mater. 40-12, 3407 3412. (Pubitemid 23605601)
35. Yang, P., Xie, P., Meng, L., Ding, H. Tang, Z. (2006) Dependence of deformation twinning on grain orientation in a high manganese steel. Scripta Mater. 55, 629 631. (Pubitemid 44109989)