메뉴 건너뛰기




Volumn 63, Issue 2, 2003, Pages 211-223

Determination of hygrothermal ageing effects in sandwich construction joints using thermoelastic stress analysis

Author keywords

A. Adhesive joints; B. Hygrothermal effect; C. Sandwich; Thermoelastic stress analysis (TSA)

Indexed keywords

AGING OF MATERIALS; COMPACTION; DATA REDUCTION; THERMOELASTICITY;

EID: 0037291476     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0266-3538(02)00252-X     Document Type: Article
Times cited : (20)

References (25)
  • 2
    • 0024699518 scopus 로고
    • The effects of thermal and hygrothermal ageing on the failure mechanisms of graphite-fabric epoxy composites subjected to flexural loading
    • Birger S, Moshonov A, Kenig S. The effects of thermal and hygrothermal ageing on the failure mechanisms of graphite-fabric epoxy composites subjected to flexural loading. Composites 1989; 20(4):341-8.
    • (1989) Composites , vol.20 , Issue.4 , pp. 341-348
    • Birger, S.1    Moshonov, A.2    Kenig, S.3
  • 3
    • 0020163040 scopus 로고
    • Evaluation of structural changes in epoxy systems by moisture sorption- desorption and dynamic mechanical studies
    • Mikols WJ, Seferis JC, Apicella A, Nicolais L. Evaluation of structural changes in epoxy systems by moisture sorption-desorption and dynamic mechanical studies. Polymer Composites 1982;3(3):118-24.
    • (1982) Polymer Composites , vol.3 , Issue.3 , pp. 118-124
    • Mikols, W.J.1    Seferis, J.C.2    Apicella, A.3    Nicolais, L.4
  • 4
    • 0018532407 scopus 로고
    • Spectroscopic evidence for mechanochemical effects of moisture in epoxy resins
    • Levy RL, Fanter DL, Summers CJ. Spectroscopic evidence for mechanochemical effects of moisture in epoxy resins. J Appl Polym Sci 1979;24:1643-64.
    • (1979) J Appl Polym Sci , vol.24 , pp. 1643-1664
    • Levy, R.L.1    Fanter, D.L.2    Summers, C.J.3
  • 5
    • 0031147698 scopus 로고    scopus 로고
    • Influence of moisture on the thermal mechanical properties of autoclaved oven-cured Kevlar 49/epoxy laminates
    • Akay M, Kongahmun S, Stanley A. Influence of moisture on the thermal and mechanical properties of autoclaved and oven-cured Kevlar 49/epoxy laminates. Comp Sci Tech 1997;57:565-71.
    • (1997) Comp Sci Tech , vol.57 , pp. 565-571
    • Akay, M.1    Kongahmun, S.2    Stanley, A.3
  • 6
    • 0026122648 scopus 로고
    • Moisture and temperature induced degradation in tensile properties of Kevlar-graphite/ epoxy hybrid composites
    • Haque A, Mahmood S, Walker L, Jeelani S. Moisture and temperature induced degradation in tensile properties of Kevlar-graphite/epoxy hybrid composites. J Reinforced Plastics Compos 1991;10:132-45.
    • (1991) J Reinforced Plastics Compos , vol.10 , pp. 132-145
    • Haque, A.1    Mahmood, S.2    Walker, L.3    Jeelani, S.4
  • 7
    • 0028058569 scopus 로고
    • Design of joints and attachments in FRP ships' structures
    • Dodkins AR, Shenoi RA, Hawkins GL. Design of joints and attachments in FRP ships' structures. Marine Structures 1994;7: 365-98.
    • (1994) Marine Structures , vol.7 , pp. 365-398
    • Dodkins, A.R.1    Shenoi, R.A.2    Hawkins, G.L.3
  • 8
    • 0018025586 scopus 로고
    • Behaviour of integral composite joints-finite element and experimental evaluation
    • Gillespie JW, Byron-Pipes R. Behaviour of integral composite joints-finite element and experimental evaluation. J Comp Mater 1978;12:408-21.
    • (1978) J Comp Mater , vol.12 , pp. 408-421
    • Gillespie, J.W.1    Byron-Pipes, R.2
  • 9
    • 0001435230 scopus 로고
    • Influence of material and geometry variations on the behaviour of bonded tee connections in FRP ships
    • Shenoi RA, Hawkins GL. In.uence of material and geometry variations on the behaviour of bonded tee connections in FRP ships. Composites 1992;23(5):335-45.
    • (1992) Composites , vol.23 , Issue.5 , pp. 335-345
    • Shenoi, R.A.1    Hawkins, G.L.2
  • 10
    • 0029357405 scopus 로고
    • Fatigue failure mechanisms in fibre-reinforced plastic laminated tee joints
    • Shenoi RA, Read PJCL, Hawkins GL. Fatigue failure mechanisms in fibre- reinforced plastic laminated tee joints. Int J Fatigue 1995;17:415-26.
    • (1995) Int J Fatigue , vol.17 , pp. 415-426
    • Shenoi, R.A.1    Read, P.J.C.L.2    Hawkins, G.L.3
  • 12
    • 0003070114 scopus 로고    scopus 로고
    • Thermoelastic and photoelastic analyses to characterise stresses in FRP connections
    • on Composite Science and Technology, Durban, South Africa
    • Read PJCL, Dulieu-Smith JM and Shenoi RA. Thermoelastic and photoelastic analyses to characterise stresses in FRP connections. In: Proc. Int. Conf. on Composite Science and Technology, Durban, South Africa 1996. p. 415-20.
    • (1996) Proc. Int. Conf. , pp. 415-420
    • Read, P.J.C.L.1    Dulieu-Smith, J.M.2    Shenoi, R.A.3
  • 14
    • 0031649729 scopus 로고    scopus 로고
    • Influence of joint geometry and load regimes on sandwich tee joint behaviour
    • Shenoi RA, Read PJCL, Jackson CL. Influence of joint geometry and load regimes on sandwich tee joint behaviour. J Reinforced Plastics Compos 1998;17:725-40.
    • (1998) J Reinforced Plastics Compos , vol.17 , pp. 725-740
    • Shenoi, R.A.1    Read, P.J.C.L.2    Jackson, C.L.3
  • 16
    • 0035736152 scopus 로고    scopus 로고
    • Determination of the stress distribution in foam cored sandwich construction composite tee joints
    • Dulieu-Barton JM, Earl JS, Shenoi RA. Determination of the stress distribution in foam cored sandwich construction composite tee joints. J Strain Analysis 2001;36(6):545-60.
    • (2001) J Strain Analysis , vol.36 , Issue.6 , pp. 545-560
    • Dulieu-Barton, J.M.1    Earl, J.S.2    Shenoi, R.A.3
  • 18
    • 0032020962 scopus 로고    scopus 로고
    • Development and applications of thermoelastic stress analysis
    • Dulieu-Barton JM, Stanley P. Development and applications of thermoelastic stress analysis. J Strain Analysis 1998;33(2):93-104.
    • (1998) J Strain Analysis , vol.33 , Issue.2 , pp. 93-104
    • Dulieu-Barton, J.M.1    Stanley, P.2
  • 19
    • 0002155945 scopus 로고
    • Alternative calibration techniques for quantitative thermoelastic stress analysis
    • Dulieu-Smith JM. Alternative calibration techniques for quantitative thermoelastic stress analysis. Strain 1995;31:9-16.
    • (1995) Strain , vol.31 , pp. 9-16
    • Dulieu-Smith, J.M.1
  • 21
    • 0030673422 scopus 로고    scopus 로고
    • The combined effects of load, temperature and moisture on the durability of E-glass/vinyl ester composite materials
    • Buck SE, Lischer DW, Nemat-Nasser S. The combined effects of load, temperature and moisture on the durability of E-glass/vinyl ester composite materials. Proc 42nd Int SAMPE Symposium and Exhibition 1997;42(1):444-54.
    • (1997) Proc 42nd Int SAMPE Symposium and Exhibition , vol.42 , Issue.1 , pp. 444-454
    • Buck, S.E.1    Lischer, D.W.2    Nemat-Nasser, S.3
  • 22
    • 0030285830 scopus 로고    scopus 로고
    • The immersed fatigue response of polymer composites
    • Smith LV, Weitsman YJ. The immersed fatigue response of polymer composites. Int J Fracture 1996;82:31-42.
    • (1996) Int J Fracture , vol.82 , pp. 31-42
    • Smith, L.V.1    Weitsman, Y.J.2
  • 23
    • 0023994929 scopus 로고
    • Residual stress measurement by means of the thermoelastic effect
    • Wong AK, Dunn SA, Sparrow JG. Residual stress measurement by means of the thermoelastic e.ect. Nature 1988;332:613-5.
    • (1988) Nature , vol.332 , pp. 613-615
    • Wong, A.K.1    Dunn, S.A.2    Sparrow, J.G.3
  • 24
    • 0346735961 scopus 로고    scopus 로고
    • The effect of plastic deformation on the thermoelastic response of steel
    • Nottingham, UK
    • Dulieu-Barton, JM, Quinn S. The e.ect of plastic deformation on the thermoelastic response of steel. In: Proc. 2nd Int. Conf. On Mechanics in Design, Nottingham, UK, 1998. p. 327-36.
    • (1998) Proc. 2nd Int. Conf. On Mechanics in Design , pp. 327-336
    • Dulieu-Barton., J.M.1    Quinn, S.2
  • 25
    • 0032090323 scopus 로고    scopus 로고
    • On the interpretation and significance of the Gruneisen parameter in thermoelastic stress analysis
    • Dulieu-Smith JM, Stanley P. On the interpretation and significance of the Gruneisen parameter in thermoelastic stress analysis. J Mat Processing Technol 1998;78:75-83.
    • (1998) J Mat Processing Technol , vol.78 , pp. 75-83
    • Dulieu-Smith, J.M.1    Stanley, P.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.