Modified method developed for contact-induced adhesion in indentation

Journal of Materials Research

Volumn 24, Issue 5, 2009, Pages 1795-1802

  Shen, Yan Xing ^a   Wei, Pal Jen ^a   Lin, Jen Fin ^a  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESION ENERGY; ELASTIC TENSION; HERTZIAN CONTACTS; INDENTER; INTERFACIAL ADHESIONS; LOAD-DISPLACEMENT DATA; LOADING PROCESS; PENETRATION DEPTH; POLYDIMETHYLSILOXANE PDMS; REAL-CODED GENETIC ALGORITHM; SPHERICAL INDENTER; TWO STAGE; UNLOADING PROCESS; VAN DER WAALS INTERACTIONS;

SILICONES; UNLOADING; VAN DER WAALS FORCES; VICKERS HARDNESS TESTING;

ADHESION;

EID: 67649529348     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0196     Document Type: Article

References (42)

1. Y. Zhou, C-S. Yang, J-A. Chen, G-F. Ding, W. Ding, L. Wang, M-J. Wang, Y-M, Zhang, and T-H. Zhang: Measurement of Young's modulus and residual stress of copper film electroplated on silicon wafer. Thin Solid Films 460, 175 (2004).
2. J. Zhou and K. Komvopoulos: Surface and interface viscoelastic behaviors of thin polymer films investigated by nanoindentation. J. Appl. Phys. 100, 114329 (2006).
3. P. Delobelle, O. Guillon, E. Fribourg-Blanc, C. Soyer, E. Cattan, and D. Remiens: True Young modulus of Pb(Zr,Ti)0-3 films measured by nanoindentation. Appl. Phys. Lett. 85, 5185 (2004).
4. D. Tranchida, S. Piccarolo, J. Loos, and A. Alexeev: Accurately evaluating Young's modulus of polymers through nanoindenta-tions: A phenomenological correction factor to the Oliver and Pharr procedure. Appl. Phys. Lett. 89, 171905 (2006).
5. J.C. Lotters, W. Olthuis, P.H. Veltink, and P. Bergveld: The mechanical properties of the rubber elastic polymer polydi-methylsiloxane for sensor applications. J. Micromech. Microeng. 7, 145 (1997).
6. Y-P. Zhao, X. Shi, and W.J. Li: Effect of work of adhesion on nanoindentation. Rev. Adv. Mater. Sci. 5, 348 (2003).
7. V.V. Pokropivny, V.V. Skorokhod, and A.V. Pokropίvny: Adhesive phenomena at the α-Fe interface during nanoindentation, stretch and shock. Modell. Simul. Mater. Sci. Eng. 5, 579 (1997).
8. K.L. Johnson, K. Kendall, and A.D. Roberts: Surface energy and contact of elastic solids. Proc. R. Soc. London, Ser. A 324, 301 (1971).
9. B.V. Derjaguin, V.M. Muller, and Y.P. Toporov: Effect of contact deformations on adhesion of particles. J. Colloid Interface Sci. 53, 314(1975).
10. D. Tabor: Surface forces and surface interactions. J. Colloid Interface Sci. 58, 2 (1977).
11. D. Maugis: Adhesion of spheres-The JKR-DMT transition using a Dugdale model. J. Colloid Interface Sci. 150, 243 (1992).
12. H. Hertz: On the contact of elastic solids. J. Reine Angew. Math. 92,156(1881).
13. O. Piétrement and M. Troyon: General equations describing elastic indentation depth and normal contact stiffness versus load. J. Colloid Interface Sci. 226, 166 (2000).
14. E. Barthel: On the description of the adhesive contact of spheres with arbitrary interaction potentials. J. Colloid Interface Sci. 200, 7 (1998).
15. H.R. Brown: Effects of chain pull-out on adhesion of elastomers. Macromolecules 26, 1666 (1993).
16. E. Raphael and P.G. DeGennes: Rubber-rubber adhesion with connector molecules. J. Phys. Chem. 96, 4002 (1992).
17. A. Ghatak, K. Vorvolakos, H. She, D.L. Malotky, and M.K. Chaudhury: Interfacial rate processes in adhesion and friction. J. Phys. Chem. B 104, 4018 (2000).
18. K. Kendall: Peel adhesion of solid films: Surface and bulk effects. J.Adhes.5, 179(1973).
19. S.J. Clarson and J.A. Semlyen: Siloxane Polymers (Prentice-Hall, Englewood Cliffs, NJ, 1993).
20. J.C. Lotters, W. Olthuis, P.H. Veltink, and P. Bergveld: Polydi-methylsiloxane as an elastic material applied in a capacitive ac-celerometer. J. Micromech. Microeng. 6, 52 (1996).
21. K.G. Sharp, G.S. Blackman, N.J. Glassmaker, A. Jagota, and C.Y. Hui: Effect of stamp deformation on the quality of microcontact printing: Theory and experiment. Langmuir 20, 6430 (2004).
22. G. Gillies and C.A. Prestidge: Interaction forces, deformation and nano-rheology of emulsion droplets as determined by colloid probe AFM. Adv. Colloid Interface Sci. 108-109, 197 (2004).
23. L. Sirghi and F. Rossi: Adhesion and elasticity in nanoscale indentation. Appl. Phys. Lett. 89, 243118 (2006).
24. S. Gupta, F. Carrillo, C. Li, L. Pruitt, and C. Puttlitz: Adhesive forces significantly affect elastic modulus determination of soft polymeric materials in nanoindentation. Mater. Lett. 61,448 (2007).
25. Y.Y. Lim and M.M. Chaudhri: Indentation of elastic solids with a rigid Vickers pyramidal indenter. Mech. Mater. 38, 1213 (2006).
26. Y. Cao, D. Yang, and W. Soboyejoy: Nanoindentation method for determining the initial contact and adhesion characteristics of soft polydimethylsiloxane. J. Mater. Res. 20, 2004 (2005).
27. F. Carrillo, S. Gupta, M. Balooch, S.J. Marshall, G.W. Marshall, L. Pruitt, and CM. Puttlitz: Nanoindentation of polydimethylsiloxane elastomers: Effect of crosslinking, work of adhesion, and fluid environment on elastic modulus. J. Mater. Res. 20,2820 (2005).
28. K.L. Johnson: Contact Mechanics (Cambridge University Press, Cambridge, UK, 1987).
29. C. Livermore and J. Voldman: Material properties database. http://www.mit.edu/~6.777/matprops/matprops.htm (2005).
30. R.S. Rivlin and D.W. Saunders: Large elastic deformations of isotropic materials. VII. Experiments on the deformation of rubber. Philos. Trans. R. Soc. London, Ser. A 243, 251 (1951).
31. M. Mooney: A theory of large elastic deformation. J. Appl. Phys. 11, 582 (1940).
32. Y.S. Yu and Y.P. Zhao: Deformation of PDMS membrane and microcantilever by a water droplet: Comparison between Mooney-Rivlin and linear elastic constitutive models. J. Colloid Interface Sci. 332, 467 (2009).
33. R.C. Huang, and L. Anand: Non-linear mechanical behavior of the elastomer polydimethylsiloxane (PDMS) used in the manufacture of microfluidic devices, (unpublished).
34. G.I. Barenblatt: The mathematical theory of equilibrium of cracks in brittle fracture. Adv. Appl. Mech. 7, 55 (1962).
35. D.S. Dugdale: Yielding of sheets containing slits. J. Mech. Phys. Solids 8, 100(1960).
36. K.L. Johnson and J.A. Greenwood: Adhesion map for the contact of elastic spheres. J. Colloid Interface Sci. 192, 326 (1997).
37. X. Shi and Y-P. Zhao: Comparison of various adhesion contact theories and the influence of dimensionless load parameter. J. Adhes. Sci. Technol. 18, 55 (2004).
38. D.E. Goldberg: Genetic Algorithms in Search, Optimization and Machine Learning (Addison-Wesley Professional, Reading, MA, 1989).
39. R.L. Haupt and S.E. Haupt: Practical Genetic Algorithms (Wiley Interscience, New York, 1998).
40. C.J. Buchko, M.J. Slattery, K.M. Kozloff, and D.C. Martin: Mechanical properties of biocompatible protein polymer thin films. J. Mater. Res. 15, 231 (2000).
41. L. Bes, K. Huan, E. Khoshdel, M.J. Lowe, C.F. McConville, and D.M. Haddleton: Poly(methylmethacrylate-dimethylsiloxane) tri-block copolymers synthesized by transition metal mediated living radical polymerization: Bulk and surface characterization. Eur. Polym. J. 39, 5 (2003).
42. A. Bietsch and B. Michel: Conformal contact and pattern stability of stamps used for soft lithography. J. Appl. Phys. 88, 4310 (2000).