Aggressive 3rd-body wear challenge to highly crosslinked polyethylene: A hip simulator model

Wear

Volumn 267, Issue 5-8, 2009, Pages 734-742

  Kubo, K ^a,b   Clarke, I C ^a   Sorimachi, T ^b   Williams, P A ^a   Donaldson, T K ^c   Yamamoto, K ^b  

^a LOMA LINDA UNIVERSITY   (United States)

^b TOKYO MEDICAL UNIVERSITY   (Japan)

^c Empire Orthopedic Faculity   (United States)

Author keywords

3rd Body debris; Al2O3; Large diameter; PMMA; Surface roughness; UHMWPE

Indexed keywords

3RD-BODY DEBRIS; AL2O3; LARGE DIAMETER; PMMA; UHMWPE;

ABRASION; ABRASIVES; ALUMINUM; BEARINGS (STRUCTURAL); BONE; BONE CEMENT; CEMENTS; CONCENTRATION (PROCESS); DEBRIS; INTERFEROMETERS; INTERFEROMETRY; LUBRICANTS; METAL ANALYSIS; PLASTIC CONTAINERS; REGRESSION ANALYSIS; SCANNING ELECTRON MICROSCOPY; SIMULATORS; SPHERES; SURFACE PROPERTIES; SURFACE ROUGHNESS; THERMOPLASTICS; TRIBOLOGY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

PHOTORESISTS;

EID: 65749088517     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.01.029     Document Type: Article

References (34)

1. Yamamoto K., Clarke I.C., Masaoka T., et al. Microwear phenomena of ultrahigh molecular weight polyethylene cups and debris morphology related to gamma radiation dose in simulator study. J. Miomed. Mater. Res. 56 July (1) (2001) 65-73
2. Wang A., Polineni V.K., Essner A., et al. Effect of radiation dosage on the wear of stabilized UHMWPE evaluated by hip and knee joint simulators. Proceedings of the 23rd Annual Meeting of the Society for Biomaterials. New Orleans, LA, April 30-May 4 (1999)
3. McKellop H., Shen F.W., Lu B., Campbell P., and Salovey R. Development of an extremely wear resistant ultra-high molecular weight polyethylene for total hip replacements. J. Orthop. Res. 17 (1999) 157-167
4. McKellop H., and Shen F.W. Surface gradient crosslinking to reduce wear of UHMW polyethylene acetabular cups. Society for Biomaterials 25th Annual Meeting Transactions. April 2-May 2 (1999)
5. McKellop H., Shen F.W., DiMaio W., and Lancaster J.G. Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls. Clin. Orthop. 369 (1999) 73-82
6. Endo M.M., Barbour P.S., Barton D.C., et al. Comparative wear and wear debris under three different counterface conditions of and non-crosslinked ultra high molecular weight polyethylene. Biomed. Mater. Eng. 11 (2001) 23-25
7. Muratoglu O.K., Bragdon C.R., O'Connor D.O., Jasty M., and Harris W.H. A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. J. Arthroplasty 16 (2001) 149-160
8. Muratoglu O.K., O'Connor D.O., Bragdon C.R., Perinchief R.S., Estok D.M., Jasty M., and Harris W.H. Larger diameter femoral heads used in conjunction with a highly cross-linked ultrahigh molecular weight polyethylene: a new concept. J. Arthroplasty 16 8 Suppl 1 (2001) 24-30
9. Burroughs B.R., Rubash H.E., and Harris W.H. Femoral head sizes larger than 32 mm against highly cross-linked polyethylene. Clin. Orthop. 405 (2002) 150-157
10. Martell J.M., Verner J.J., and Incavo S.J. Clinical performance of a highly cross-linked polyethylene at two years in total hip arthroplasty: a randomized prospective trial. J. Arthroplasty 18 October (7 Suppl 1) (2003) 55-59
11. Saikko V., Calonius O., and Keranen J. Effect of counterface roughness on the wear of conventional and crosslinked UHMWPE studied with a multi-directional motion pin-on-disk device. J. Biomed. Mater. Res. 57 (2001) 506-512
12. I.C. Clarke, D.D. Green, P.A. Williams, K. Kubo, et al., Hip-simulatorwear studies of an alumina-matrix composite (AMC) ceramic compared to retrieval studies of AMC balls with 1 to 7 years follow-up, Wear, in press.
13. Clarke I.C., Good V., Anissian L., and Gustafson A. Charnley wear model for validation of hip simulators-ball diameter versus polytetrafluoroethylene and polyethylene wear. Proc. Inst. Mech. Eng., Vol. 211 (H) (1997) 25-36
14. Williams P.A., et al. High crosslinked polyethylene in hip replacement; Improved wear performance or paradox?. Tribol. Trans. 50 2 (2007) 1-14
15. Hall R.M., Unsworth A., Siney P., and Wroblewski B.M. Wear in retrieved Charnley acetabular sockets. Proc. Inst. Mech. Eng. J. Eng. Med. 210 3 (1996) 197-207
16. Saikko V., Calonius O., and Keranen J. Wear of Conventional and Cross-linked Ultra-High-Molecular-Weight Polyethylene Acetabular Cups against Polished and Roughened CoCr Femoral Heads in a Biaxial Hip Simulator. Biomed. Mater. Res. (Appl. Biomater.) 63 (2002) 848-853
17. Wang A., and Essner A. Three-body wear of UHMWPE acetabular cups by PMMA particles against CoCr, alumina and zirconia heads in hip joint simulator. Wear 250 (2001) 212-216
18. Wang A., and Schmidig G. Ceramic femoral heads prevent runaway wear for highly crosslinked polyethylene acetabular cups by third-body bone cement particles. Wear 255 (2003) 1057-1063
19. Bowsher J.G., Williams P.A., Clarke I.C., Green D.D., and Donaldson T.K. Severe wear challenge to 36 mm mechanically enhanced highly crosslinked polyethylene hip liners. J. Biomed. Mater. Res. B Appl. Biomater. 86 July (1) (2008) 253-263
20. Fisher J., Firkins P., et al. The influence of scratches to metallic counterfaces on the wear of ultra-high molecular weight Polyethylene. Proc. Inst. Mech. Eng. 209 4 (1995) 263-264
21. Brangdon C.R., Jasty M., Muratoglu O.K., et al. Third-body wear of highly cross-linked polyethylene in a hip simulator. J Arthroplasty 18 August (5) (2003) 553-561
22. Brangdon C.R., Jasty M., Muratoglu O.K., and Harris W.H. Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly (methyl-methacrylate) debris. J Arthroplasty 20 April (3) (2005) 379-385
23. Wasielewski R.C., Garante J.O., Rosenberg A.G., et al. Wear patterns on retrieved polyethylene tibial inserts and their relationship to technical considerations during total knee arthroplasty. Clin. Orthor. Rel. Res. 299 (1994) 31-43
24. Ingham E., and Fisher J. Biological reactions to wear debris in total joint replacement. Proc. Inst. Mech. Eng., Vol. 214 (Part H) (2000) 21-37
25. Que L., et al. Third-body wear of cobalt-chromium-molybdenum implant alloys initiated by bone and poly(methylmethacrylate) particles. J. Biomed. Mater. Res. 50 (2000) 322-330
26. Affatato S., Bersaglia G., et al. The performance of gamma- and EtO-sterilised UHWMPE acetabular cups tested under severe simulator conditions. Part 1. Role of the third-body wear process. Biomaterials 23 December (24) (2002) 4839-4846
27. Affatato S., Bersaglia G., Viceconti M., et al. The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints. Proc. IMechE, Vol. 220 (Part H). J. Eng. Med. (2006) 457-464
28. Jasty M., Brangdon M., et al. Surface damage to cobalt-chrome femoral head prostheses. J. Bone Joint Surg. Br. 76 January (1) (1994) 73-77
29. Sorimachi, T., Clarke, I.C., Williams, P.A., Yamamoto, K., et al., 3rd body abrasive wear challenge of 32 mm conventional and 44 mm highly crosslinked polyethylene liners in a hip simulator model, IMechE, Part H, J. Eng. Med., in press.
30. Sorimachi, T., Clarke, I.C., Williams, P.A., Yamamoto, K., Fluid absorption and wear effects in large diameter metal-polyethylene hip replacement-a hip simulator study J. Biomed. Mater. Res., in press.
31. Raimondi M.T., Vena P., and Pietrabissa R. Quantitative evaluation of the prosthetic head damage induced by microscopic third-body particles in total hip replacement. J. Biomed. Mater. Res. 58 4 (2001) 436-448
32. Mirghany M., and Jin Z.M. Prediction of scratch resistance of cobalt chromium alloy bearing surface, articulating against ultra-high molecular weight polyethylene, due to third-body wear particles. Proc. Instn Engrs Vol. 218 Part H, J. Engineering in Medicine (2004) 41-50
33. Jason Check K.S., and Kanaga Karuppiah. Sriram Sundararajan: Comparison of the effect of roughness on the micro/nanotribological behaviour of ultra-high-molecular-weight polyethylene(UHMWPE) in air and bovine serum solution. J. Biomed. Mater. Res. A 74 September 15 (4) (2005) 687-695
34. Girpert M.P., et al. The effect of roughness on the tribological behavior of the prosthetic pair UHNWPE/tin-coated stainless steel. J. Biomed. Mater. Res. Part B: Appl. Biomater. 84B (2008) 98-107