Wear in retrieved Charnley acetabular sockets

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 210, Issue 3, 1996, Pages 197-207

  Hall, R M ^a   Unsworth, A ^a  

^a DURHAM UNIVERSITY   (United Kingdom)

Author keywords

Hip arthroplasty; Surface topography; UHMWPE; Wear

Indexed keywords

ACETABULUM; ADOLESCENT; ADULT; AGED; BODY WEIGHT; CHILD; FEMALE; HIP PROSTHESIS; HUMAN; MALE; MIDDLE AGED; MULTIVARIATE ANALYSIS; NOTE; PATHOLOGY; PROSTHESIS; PROSTHESIS FAILURE; REOPERATION; SURFACE PROPERTY;

ACETABULUM; ADOLESCENT; ADULT; AGED; BODY WEIGHT; CHILD; FEMALE; HIP PROSTHESIS; HUMANS; MALE; MIDDLE AGED; MULTIVARIATE ANALYSIS; PROSTHESIS DESIGN; PROSTHESIS FAILURE; REOPERATION; SURFACE PROPERTIES;

CALCULATIONS; CEMENTS; CREEP; REGRESSION ANALYSIS; SERVICE LIFE; SIMULATORS; SURFACE ROUGHNESS; SURGERY; TRIBOLOGY; WEAR OF MATERIALS;

CHARNLEY ACETABULAR SOCKETS; FEMORAL HEAD; LEAST SQUARES REGRESSION; REVISION SURGERY; SHADOWGRAPH TECHNIQUE; WEAR VOLUME RATES;

HIP PROSTHESES;

EID: 0030331546     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/PIME_PROC_1996_210_413_02     Document Type: Article

References (58)

1. Poss, R Brick, G. W., Wright, G. W., Roberts, D. W. and Sledge, C. B. The effects of modern cementing techniques on the longevity of total hip arthroplasty. Orthop. Clin., 1988,19, 591-598.
2. Mulroy, R. D. and Harris, W. H. The effect of improved cementing techniques on component loosening in total hip replacement. J. Bone Jt Surg., 1990,72B, 757-760.
3. Morscher, E. W. Current status of acetabular fixation in primary total hip arthroplasty. Clin. Orthop., 1992,274, 172-193.
4. Schmalzried, T. P., Kwong, L. M., Jasty, M., Sedlacek, R. C., et al. The mechanism of loosening of cemented acetabular components in total hip arthroplasty. Clin. Orthop., 1992,274, 60-78.
5. Huo, M. H and Salvati, E. A. Hip wear: clinical aspects. In Biological, material and mechanical considerations of joint replacement (Ed. B. F. Morrey), 1993, pp. 241-252 (Raven Press, New York).
6. Harris, W. H. The problem is osteolysis. Clin. Orthop., 1995, 311, 46-53.
7. Wroblewski, B. M. Cementless versus cemented total hip arthroplasty. Orthop. Clin., 1993,24, 591-597.
8. Charnley, J. and Cupic, Z. The nine and ten year results of the low-friction arthroplasty of the hip. Clin. Orthop., 1973,95,9-26.
9. Charnley, J. and Halley, D. K. Rate of wear in total hip replacemenu Clin. Orthop., 1975,112,170-178.
10. Griffith, M. J., Scidenstein, M. K., Williams, D. and Charnley, J. Eight year results of Charnley arthoplasties of the hip with special reference to the behaviour of bone cement. Clin. Orthop., 1978, 137,24-36.
11. Wroblewski, B. M. 15-21 year results of the Charnley low-friction arthroplasty. Clin. Orthop., 1986,211, 30-35.
12. Livermore, J., Ilstrup, D. and Morrey, B. F. Effect of femoral head size on wear of the polyethylene acetabular component. J. Bone Jt Surg., 1990,72A, 518-528.
13. Wroblewski, B. M. Charnley low-friction arthroplasty in the young patient. Clin. Orthop., 1992,285,45-47.
14. Callaghan, J. J., Kirn, S. K., Brown, T. D., Pedersen, D. R. and Johnston, R. C. Concerns and improvements with cementless metal-backed acetabular components. Clin. Orthop., 1995, 311, 76-84.
15. Atkinson, J. R., Dowson, D., Isaac, G. H. and Wroblewski, B. M. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. Ill: The measurement of internal volume changes in explanted Charnley after 2-16 years in vivo and the determination of wear factors. Wear, 1985,104,225-244.
16. Wroblewski, B. M. Direction and rate of socket wear in Charnley low-friction arthroplasty. J. Bone Jt Surg., 1985,67B, 757-761.
17. Isaac, G. H_, Wroblewski, B. M., Atkinson, J. R. and Dowson, D. A tribological study of retrieved hip prostheses. Clin. Orthop., 1992,276,115-125.
18. Dowling, J. M., Atkinson, J. R., Dowson, D. and Charnley, B. The characteristics of acetabular cups worn in the human body. J. Bone Jt Surg., 1978, 60B, 375-382.
19. Atkinson, J. R., Dowson, D., Isaac, G. H. and Wroblewski, B. M. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. II: A microscopical study of the surfaces of Charnley polyethylene acetabular sockets. Wear, 1985,104,217-224.
20. Elloy, M. Simulator testing of joint prostheses: the need for realistic simulator testing. SERC/IMechE Annual Expert Meeting on Failure of joint prostheses, Bournemouth, 1993, pp. 79-82 (Mechanical Engineering Publications, London).
21. Isaac, G. H., Atkinson, J. R., Dowson, D. and Wroblewski, B. M. The role of cement in the long term performance and premature failure of Charnley low friction arthroplasties. Engng in Medicine, 1986,15,19-22.
22. Mishra, A. K. and Davidson, J. A. PMMA abrasion resistance of zirconia, TiN and ADLC surfaces. Proc. 4th World Biomaterials Congress, Berlin, Germany, 1992.
23. Dumbleton, J. H. Tribology of natural and artificial joints; Tribology Series 3. 1st Edition, 1981, pp. 149-182 (Elsevier, Amsterdam).
24. Wang, A., Sun, D. C., Stark, C. and Dumbleton, J. H. Wear mechanisms of UHMWPE in total joint replacements. Wear, 1995,181-3,241-249.
25. Charnley, J. Arthroplasty of the hip. A new operation. Lancet, 1961,1129-1132.
26. Shelley, P. and Wroblewski, B. M. Socket design and cement pressurisation in the Charnley low-friction arthroplasty. J. Bone Jt Surg., 1988,70B, 358-363.
27. Kobayashi, P. and Terayama, K. Factors influencing survival of the socket after primary low-friction arthroplasty of the hip. Arch. Orthop. Trauma. Surg., 1993,112,56-60.
28. Hall, R. M., Craig, P. S., Unsworth, A., Hardaker, C., Siney, P. and Wroblewski, B. M. Measurement of wear in retrieved acetabular sockets. Proc. Instn Mech. Engrs, Part H, 1995, 209 (H4), 233242.
29. Kabo, J. M., Gcbhard, J. S., Loren, G. and Amstutz, H. C. In vivo wear of polyethylene acetabular components. J. Bone Jt Surg., 1993,72B, 254-258.
30. Visscher, M. and Struik, K. G. Optical profilometry and its application to mechanically inaccessible surfaces. Part 1 : Principles of focus error detection. Precision Engng, 1994,16,192-198.
31. Hall, R. M., Unsworth, A., Siney, P. and Wroblewski, B. M. The surface topography of retrieved femoral heads. Journal of Materials: Materials in Medicine (in press).
32. Paul, J. P. Forces transmitted by joints of the human body. Proc. Instn Mech. Engrs, 1967,181,8-15.
33. Wallbridge, N. C. and Dowson, D. The walking activity of patients with artificial joints. Engng in Medicine, 1982,11,95-96.
34. Dowson, D., El-Haby Diab, M. M., Gillis, B. J. and Atkinson, J. R. The influence of counterface topography on the wear of ultrahigh molecular-weight polyethylene under wet or dry conditions. Proceedings of the International Symposium on Polymer wear and its control, St Louis, 1984, pp. 226-232 (American Chemical Society, New York).
35. Cooper, J. R., Dowson, D. and Fisher, J. The effect of transfer film and surface roughness on the wear of lubricated ultra-high molecular weight-polyethylene. Clin. Mater., 1993,14,295-302.
36. Weightman, B. and Light, D. The effect of the surface finish of alumina and stainless steel on the wear rate of UHMW polyethylene. Biomaterials, 1986,7,20-24.
37. Stata Reference Manual: Release 3, 5th Edition, Vol. 3, 1992 (Computing Resource Center, Santa Monica).
38. Davidson, J. A. Phenomena related to adhesive and oxidative abrasive wear and friction of metal orthopaedic implant bearing surfaces, 1991, OR-91-02 (Smith and Nephew, Memphis).
39. Jasty, M., Bragdon, C., Lee, K., Hanson, A. and Harris, W. H. Wear of polyethylene in total joint arthroplasty. In Biological, material and mechanical considerations of joint replacement (Ed. B. F. Morrey), 1993, pp. 241-252 (Raven Press, New York).
40. Engb, G. A., Dwyer, K. A. and Hanes, C. K. Polyethylene wear of metal-backed tibial components in total and unicompartmental knee prostheses. J. Bone Jt Surg., 1992,74B, 9-17.
41. Blunn, G. W., Joshi, A. B., Lille), P. A., Engelbrecht, E. et al. Polyethylene wear in unicondylar knee prostheses. Acta Orthop. Scand., 1992,63,247-255.
42. Rose, R. M., Nusbaum, H. J., Schneider, H., Ries, M., Paul, I., et al. On the true wear rate of ultra-high molecular-weight polyethylene in the total hip prosthesis. J. Bone Jt Surg., 1980, 62A, 537549.
43. Dowson, D. and Jobbins, B. Design and developmet of a versatile hip joint simulator and a preliminary assessment of wear and creep in Chamley total replacement hip joints. Engng in Medicine, 1988,17,111-117.
44. Derbyshire, B., Fisher, J., Dowson, D., Hardaker, C. and Brummitt, K. Comparative study of the wear of UHMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints. Med. Engng Physics, 1994,16,229-236.
45. Andersson, G. B. J., Freeman, M. A. R. and Swanson, S. A. V. Loosening of the cemented acetabular cup in total hip replacement. J. Bone Jt Surg., 1972,54B, 590-599.
46. Ohlin, A. and Selvik, G. Socket wear assessment. J. Arthroplasty, 1993,8,427-431.
47. Saikko, V. O., Paavolainen, P. O. and Slaris, P. Wear of the polyethylene acetabular cup. Acta Orthop. Scand., 1993,64,391-402.
48. Fisher, J. Wear of ultra high molecular weight polyethylene in total artificial joints. Current Orthop., 1994,8,164-196.
49. Isaac, G. H., Atkinson, J. R., Dowson, D. and Wrobiewski, B. M. The role of acrylic cement in determining the penetration rate of the femoral heads in the polyethylene sockets of Charnley hip prostheses. In Ultra-high molecular weight polyethylene as bio-material in orthopaedic surgery (Eds H.-G. Willert, G. H. Buchhorn and P. Eyerer), 1991, pp. 128-136 (Hogrefe and Huber Publishers, Toronto).
50. DOWSOD, D., Taberi, S. and Wallbridge, N. C. The role of counterface imperfections in the wear of polyethylenes. Wear, 1987, 119, 277-293.
51. Weightman, B. and Light, D. A comparison of RCH 1000 and Hi-Fax 1900 ultra-high molecular weight polyethylenes. Biomaterials, 1986,6,177-183.
52. McKellop, H., Clarke, I., Markolf, K. and Amstutz, H. Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multichannel screening device. J. Biomed. Mater. Res., 1981,15,619-653.
53. Kiimar, P., Oka, M., Ikeuchi, K., Sbimizu, K., Yamamuro, T., Okumura, H. and Kotoura, Y. Low wear rate of UHMWPE against zirconia ceramic (Y-PSZ) in comparison to alumina ceramic and SUS 316L alloy. J. Biomed. Mater. Res., 1991, 25, 813-828.
54. Wright, K. W. J., Dobbs, H. S. and Scales, J. T. Wear studies on prosthetic materials using the pin-on-disc machine. Biomaterials, 1982,3,41-48.
55. Wieczorowski, M. The assessment of surface roughness correctness representation in contact and optical methods of_rneasurement. In Laser metrology and machine performance (Eds D. M. S. Blackshaw, A. D. Hope and G. T. Smith), 1993, pp. 239-248 (Computational Mechanics Publications, Southampton).
56. Mattsson L. and Wâgberg, P. Assessment of surface finish on bulk scattering materials: a comparison between optical laser stylus and mechanical stylus profilometers. Precision Engng, 1993, 15, 141-149.
57. Saikko, V. A simulator study of friction in total replacement hip joints. Proc. Instn Mech. Engrs, Part H, 1992,206 (H4), 201-211.
58. Wroblewski, B. M., McCullagh, P. J. and Siney, P. D. Quality of the surface finish of the head of the femoral component and the wear rate of the socket in long-term results of the Chamley lowfriction arthroplasty. Proc. Instn Mech. Engrs, Part H, 1992, 206 (H3), 181-183.