The predictive power of surface profile parameters on the amount of wear measured in vitro on metal-on-polyethylene artificial hip joints

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 220, Issue 3, 2006, Pages 457-464

  Affatato, S ^a   Bersaglia, G ^a   Yin, Junqiang ^b   Traina, F ^a,c   Toni, A ^a,c   Viceconti, M ^a  

^a RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^b SUN YAT SEN UNIVERSITY   (China)

^c Istituti Ortopedici Rizzoli   (Italy)

Author keywords

In vitro experiments; Metal on polyethylene artificial hip joints; Surface profile parameters; Wear

Indexed keywords

METALS; POLYETHYLENES; REGRESSION ANALYSIS; SURFACE ROUGHNESS; WEAR OF MATERIALS; HIGHER ORDER STATISTICS; HIP PROSTHESES;

IN VITRO EXPERIMENTS; METAL-ON-POLYETHYLENE; SURFACE PROFILE PARAMETERS;

HIP PROSTHESES; SURFACE ROUGHNESS;

BIOMATERIAL; METAL; POLYETHYLENE DERIVATIVE; VITALLIUM;

ARTICLE; CHEMISTRY; COMPUTER SIMULATION; EQUIPMENT; EVALUATION; HARDNESS; HIP PROSTHESIS; MATERIALS TESTING; METHODOLOGY; PARTICLE SIZE; PROSTHESIS; REGRESSION ANALYSIS; STATISTICAL MODEL; SURFACE PROPERTY;

COATED MATERIALS, BIOCOMPATIBLE; COMPUTER SIMULATION; EQUIPMENT FAILURE ANALYSIS; HARDNESS TESTS; HIP PROSTHESIS; MATERIALS TESTING; METALS; MODELS, STATISTICAL; PARTICLE SIZE; POLYETHYLENES; PROSTHESIS DESIGN; REGRESSION ANALYSIS; SURFACE PROPERTIES; VITALLIUM;

AVERAGE SURFACE ROUGHNESS; COBALT CHROMIUM MOLYBDENUMS; IN-VITRO; POLYETHYLENE WEAR; PREDICTIVE POWER; SURFACE CONDITIONING; SURFACE PROFILES; WEAK CORRELATION;

EID: 33746403401     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544119JEIM95     Document Type: Article

References (39)

1. Herberts, P., Kärrholm, J., and Garellick, G. The Swedish National Hip Arthropalsty Register - Annual Report 2004. Department of Orthopaedics, Sahlgrenska University Hospital, Göteborg.
2. Willert, H. G. Reactions of the articular capsule to wear products of artificial joint prostheses. J. Biomed. Mater. Res., 1977, 11(2), 157-164.
3. Amstutz, H. C., Campbell, P. A., Kossovky, N., and Clarke, L. C. Mechanical and clinical significance of wear debris-induced osteolysis. Clin. Orthop. Related Res., 1992, 276, 7-18.
4. Lloyd, A. I. and Noel, R. E. The effect of counterface surface roughness on the wear of UHMWPE in water and oil-in-water emulsion. Tribology Int., 1988, 21, 83-88.
5. Wang, A., Sun, D. C., Stark, C., and Dumbleton, J. H. Wear mechanisms of UHMWPE in total hip replacements. Wear, 1995, 181-183, 241-249.
6. Lancaster, J. G., Dowson, D., Isaac, G. H., and Fisher, J. The wear of ultra-high molecular weight polyethylene sliding on metallic and ceramic counterfaces representative of current femoral surfaces in joint replacement. Proc. Instn Mech, Engrs, Part H, J. Engineering in Medicine, 1997, 211(H1), 17-24.
7. McKellop, H., Shen, F. W., DiMaio, W., and Lancaster, J. G. Wear of gamma-crosslinked polyethylene acetabular cups against roughened femoral balls. Clin. Orthop., 1999, 369, 73-82.
8. Bos, I. Histological investigation of polyethylene particles in total hip replacement: ceramic versus metal heads. Hip Int., 2000, 10(3), 151-60.
9. Maccauro, G., Piconi, C., Proletti, L., Timpanaro, M., De Santis, V., Maglicchetti, G., and De Santis, E. Analysis of the catastrophic failure of a THR: the role of the acetabular component. Hip Int., 2001, 11(4), 201-208.
10. Saikko, V., Calonius, O., and Keränen, J. Effect of counterface roughness on the Wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multi-directional motion pin-on-disk device. J. Biomed. Mater Res., 2001, 57(4), 506-512.
11. Haley, J. L., Ingham, E., Stone, M., Wrobleski, B. M., and Fisher, J. Utra-high molecular weight polyethylene wear derbris generated in vivo and in laboratory tests; the influence of counterface roughness. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210(H1), 3-10.
12. Elfick, A. P. D., Hall, R. M., Pinder, I. M., and Unsworth, A. The influence of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene sockets in cementless total hip replacement. J. Biomed. Mater. Res., 1999, 48, 712-718.
13. Affatato, S., Bersaglia, G., Foltran, I., Taddei, P., Fini, G., and Toni, A. The performance of gamma- and EtO-sterilised UHMWPE acetabulars cups tested under severe simulator conditions. Part 1: role of the third-body wear process. Biomaterials, 2002, 23, 4839-4846.
14. Davidson, J. A., Poggie, R. A., and Mishra, A. K. Abrasive wear of ceramic, metal, and UHMWPE bearing surfaces from third-body bone, PMMA bone cement, and titanium debris. Bio-Med. Mater. Engng, 1994, 4(3), 213-229.
15. Kabo, J. M., Gebhard, J. S., Loren, G., and Amstutz, H. C. In vivo wear of polyethylene acetabular components. T. Bone It Surg., 1993. 75B(2), 254-258.
16. McKellop, H., Clarke, I., Markolk, K., and Amstutz, H. Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multichannel screening device. J. Biomed. Mater. Res., 1981, 15, 619-623.
17. Mckellop, H. A., Campbell, P., and Park, S. H. The origin of submicron polyethylene wear debris in total hip arthroplasty. Clin. Orthop. Rel. Res., 1995, 31l, 3-20.
18. Santavirta, S., Lappalainen, R., Pekko, P., Anttila, A., and Konttinen, Y. T. The counterface, surface smoothness, tolerances, and coatings in total joint prostheses. Clin. Orthop., 1999, 369, 92-102.
19. Like, Q., Topoleski L. D. T., and Parks, N. L. Surface roughness of retrieved CoCrMo alloy femoral components from PCA artificial total knee joints. J. Appl. Biomater, 2000, 53, 111-118.
20. Peterson, C. D., Hillberry, B. M., and Heck, D. A. Component wear of total knee prostheses using Ti-6Al-4V, titanium nitride coated Ti-6Al-4V, and cobalt-chromium-molybdenum femoral components. J. Biomed. Mater Res., 1988, 22, 887-903.
21. Rose, R. M., Cimino, W. R., Ellis, E., and Crugnola, A. N. Exploratory investigations on the structure dependence of the wear resistance of polyethylene. Wear, 1982, 77, 89-104.
22. Fisher, J., Firkins, P., Reeves, E. A., Hailey, J. L., and Isaac, G. H. The influence of scratches to metallic counterfaces on the wear of ultra-high molecular weight polyethylene. Proc. Instn Mech. Engrs. Part H: J. Engineering in Medicine, 1995, 209(H4), 263-264.
23. Raimondi, M. T., Vena, P., and Pietrabissa, R. A study on the third-body induced roughening of the prosthetic head in total hip replacement. In Bioengineering Conference ASME, 2001.
24. Raimondi, M. T. and Pietrabissa, R. The in-vivo wear performance of prosthetic femoral heads with titanium nitride coating. Biomaterials, 2000, 21(9), 907-913.
25. Raimondi, M. T., Vena, P., and Pietrabissa, R. Quantitative evaluation of the prosthetic head damage induced by microscopic third-body particles in total hip replacement. J. Biomed. Mater. Res. (Appl. Biomater), 2001, 58, 436-448.
26. Saikko, V., Ahlroos, T., Calonius, O., and Keränen, J. Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon. Biomaterials, 2001, 22, 1507-1514.
27. Piconi, C., Labanti, M., Magnani, G., Caporale, M., Maccattro, G., and Magliocchetti, G. Analysis of a failed alumina THR ball head. Biomaterials, 1999, 20, 1637-1646.
28. Van Loon, J.-P., Verkerke, G. J., de Bont, L. G. M., and Liem, R. S. B. Wear-testing of a temporomandibular joint prosthesis: UHMWPE and PTFE against a metal ball, in water and in serum. Biomaterials, 1999, 20, 1471-1478.
29. Que, L. and Topoleski, L. D. Surface roughness quantification of CoCrMo implant alloys. J. Biomed. Mater. Res., 1999, 48(5), 705-711.
30. Haraguchi, K., Sugano, N., and Nishii, T. Influence of polyethylene and femoral head surface quality on wear: a retrieval study. Int. Orthop., 2001, 25(1), 29-34.
31. Saikko, V., Calonius, O., and Keränen, J. Wear of conventional and cross-linked ultra-high-molecular-weight polyethylene acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator. J. Biomed. Mater. Res. Part B: Appl. Biomater, 2002, 63B, 848-853.
32. Raimondi, M. T., Santambrogio, C., Pietrabissa, R., Raffelini, F., and Molfetta, L. Improved mathematical model of the wear of the cup articular surface in hip joint prostheses and comparison with retrieved components. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215(H4), 377-391.
33. Affatato, S., Bersaglia, G., Emiliani, D., Foltran, I., Taddel, P., Reggiani, M., Ferrieri, P., and Toni, A. The performance of gamma- and EtO-sterilised UHMWPE acetabular cups tested under severe simulator conditions. Part 2: wear particle characteristics with isolation protocols. Biomaterials, 2003, 24, 4045-4055.
34. Falez, F., La Cava, F., and Panegrossi, G. Femoral prosthetic heads and their signifcance in polyethylene wear. Int. Orthop., 2000, 24, 126-129.
35. Armitage, P. and Berry, G. Further experimental designs. In Statistical Methods in Medical Research, 1994, pp. 237-282 (Blackwell Scientific Publications, Oxford).
36. Armitage, P. and Berry, G. Regression and correlation. In Statistical Methods in Medical Research, 1994, pp. 154-174 (Blackwell Scientific Publications, Oxford).
37. ISO. Implant for surgery - partial and total hip joint prostheses - Part 2: articulating surfaces made of metallic, ceramic and plastics materials, 1996.
38. Song, J. F. and Vorburger, T. V. Surface texture. In ASM Handbook: Friction, Lubrication, and Wear Technology (Ed. S. D. Henry), 1992, pp. 334-345 (ASM International).
39. Jiang, X. Q., Blunt, L., and Stout, K. J. Three-dimensional surface characterization for orthopaedic joint prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213(H1), 49-68.