The role of crystalline anisotropy in mechanical property extractions through Berkovich indentation

Journal of Materials Research

Volumn 24, Issue 3, 2009, Pages 1235-1244

  Alcalá, Jorge ^a   Esque de los Ojos D ^a   Rodriguez S A ^b  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

BERKOVICH INDENTATIONS; CONTACT AREAS; CRYSTAL PLASTICITY FINITE ELEMENTS; CRYSTALLINE ANISOTROPIES; ELASTO PLASTICS; FACE-CENTERED CUBIC; INSTRUMENTED INDENTATIONS; ROBUST PROCEDURES;

ANISOTROPY; MECHANICAL PROPERTIES; PLASTICITY; UNLOADING;

SINGLE CRYSTALS;

EID: 63449088859     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0140     Document Type: Article

References (46)

1. F. Doerner and W.D. Nix: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).
2. W.C. Oliver and G.M. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
3. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
4. M. Mata, M. Anglada, and J. Alcalá: A hardness equation for sharp indentation of elastic-power-law strain-hardening materials. Philos. Mag. A 82, 1831 (2002).
5. M. Mata and J. Alcalá: Mechanical property evaluation through sharp indentations in elastoplastic and fully plastic contact regimes. J. Mater. Res. 18, 1705 (2003).
6. Y-T. Cheng and C-M. Cheng: Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng., R 44, 91 (2004).
7. O. Casals and J. Alcalá: The duality in mechanical property extractions from Vickers and Berkovich instrumented indentation experiments. Acta Mater. 53, 3545 (2005).
8. N. Chollacoop and U. Ramamurty: Robustness of the algorithms for extracting plastic properties from the instrumented sharp indentation data. Mater. Sci. Eng., A 423, 41 (2006).
9. X. Chen, N. Ogasawara, M.H. Zhao, and N. Chiba: On the uniqueness of measuring elastoplastic properties from indentation: The indistinguishable mystical materials. J. Mech. Phys. Solids 55, 1618 (2007).
10. X. Qian, Y.P. Cao, and J. Lu: Dependence of the representative strain on the hardening functions of metallic materials in indentation. Scr. Mater. 57, 57 (2007).
11. H.Z. Lan and T.A. Venkatesh: On the sensitivity characteristics in the determination of the elastic and plastic properties of materials through multiple indentation. J. Mater. Res. 22, 1043 (2007).
12. O. Casals and J. Alcalá: Analytical and experimental resolutions in the duality of mechanical property extractions from instrumented indentation experiments: Comments on "On determination of material parameters from loading and unloading responses in nanoindentation with a single sharp indenter" by L. Wang and S.I. Rokhlin. i J. Mater. Res. 21, 995 (2006)]. J. Mater. Res. 22, 1138 (2007).
13. M.Q. Le: Computational study on the instrumented sharp indentations with dual indenters. Int. J. Solids Struct. 45, 2818 (2008).
14. S. Swaddiwudhipong, E. Harsono, and J. Hua: Reverse analysis via efficient artificial neural networks based on simulated Berkovich indentation considering effects of friction. Eng. Comput. 24, 127 (2008).
15. J. Luo and J. Lin: A study on the determination of plastic properties of metals by instrumented indentation using two sharp indenters. Int J. Solids Struct. 44, 5803 (2007).
16. D. Ma, C.W. Ong, and T. Zhang: An improved energy method for determining Young's modulus by instrumented indentation using a Berkovich tip. J. Mater. Res. 23, 2106 (2008).
17. O. Casals, J. Ocenasek, and J. Alcalá: Crystal plasticity finite element simulations of pyramidal indentation in copper single crystals. Acta Mater. 55, 55 (2007).
18. J. Alcalá, O. Casals, and J. Ocenasek: Micromechanics of pyramidal indentation in fcc metals: Single crystal plasticity finite element analysis. J. Mech. Phys. Solids 56, 3277 (2008).
19. R.J. Asaro: Micromechanics of crystals and polycrystals. Adv. Appl. Mech. 23, 1 (1983).
20. J.L. Bassani and T.Y. Wu: Latent hardening in single crystals. 2. Analytical characterization and predictions. Proc. R. Soc. London A 435, 21 (1991).
21. J. Alcalá: Instrumented micro-indentation of zirconia ceramics. J. Am. Ceram. Soc. 83, 1977 (2000).
22. J. Alcalá, A.C. Barone, and M. Anglada: The influence of plastic hardening on surface deformation modes around Vickers and spherical indents. Acta Mater. 48, 3451 (2000).
23. M. Rester, C. Motz, and R. Pippan: Microstructural investigation of the volume beneath nanoindentations in copper. Acta Mater. 55, 6427 (2007).
24. J. Alkorta, J.M. Martninez-Esnaola, and J.G. Sevillano: Detailed assessment of indentation size-effect in recrystallized and highly deformed niobium. Acta Mater. 54, 3445 (2006).
25. N. Zaafarani, D. Raabe, F. Roters, and S. Zaefferer: On the origin of deformation-induced rotation patterns below nanoindents. Acta Mater. 56, 31 (2008).
26. X.H. Liu, J.F. Gu, Y. Shen, and C. Chen: Anisotropy in homogeneous dislocation nucleation by nanoindentation of single crystal Cu. Scr. Mater. 58, 564 (2008).
27. Y.T. Cheng and C.M. Cheng: Further analysis of indentation loading curves: Effects of tip rounding on mechanical property measurements. J. Mater. Res. 13, 1059 (1998).
28. J. Chen and S.J. Bull: On the relationship between plastic zone radius and maximum depth during nanoindentation. Surf. Coat. Technol. 201, 4289 (2006).
29. J.M. Antunes, L.F. Menezes, and J.V. Femandes: Influence of Vickers tip imperfection on depth-sensing indentation tests. Int. J. Solids Struct. 44, 2732 (2007).
30. J.M. Meza, F. Abbes, and M. Troyon: Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements. J. Mater. Res. 23, 725 (2008).
31. Y. Huang, F. Zhang, and K.C. Hwang: A model of size effects in nano-indentation. J. Mech. Phys. Solids 54, 1668 (2006).
32. Z. Xue, Y. Huang, K.C. Hwang, and M. Li: The influence of indenter tip radius on the micro-indentation hardness. J. Eng. Mater. Technol. 124, 371 (2002).
33. S. Qu, Y. Huang, W.D. Nix, H. Jiang, F. Zhang, and K.C. Hwang: Indenter tip radius effect on the Nix-Gao relation in micro- and nanoindentation hardness experiments. J. Mater. Res. 19, 3423 (2004).
34. J.F. Archard: Elastic deformation and the laws of friction. Proc. R. Soc. London A 243, 190 (1957).
35. K. Komvopoulos and D.H. Choi: Elastic finite element analysis of multi-asperity contacts. J. Tribol. 114, 823 (1992).
36. B. Bhushan and S. Venkatesan: Effective mechanical properties of layered rough surfaces. Thin Solid Films 473, 278 (2005).
37. E. Harsono, S. Swaddiwudhipong, and Z.S. Liu: The effect of friction on indentation test results. Model. Simul. Mater. Sci. Eng. 16(065001), (2008).
38. K. Komvopoulos and Z.Q. Gong: Stress analysis of a layered elastic solid in contact with a rough surface exhibiting fractal behavior. Int. J. Solids Struct. 44, 2109 (2007).
39. S.A. Rodriguez and J. Alcalá: Unpublished results.
40. M. Mata and J. Alcalá: The role of friction on sharp indentation. J. Mech. Phys. Solids 52, 145 (2004).
41. Y. Liu and A.H.W. Ngan: Depth dependence of hardness in copper single crystals measured by nanoindentation. Scr. Mater. 44, 237 (2001).
42. D.F. Bahr, D.E. Kramer, and W.W. Gerberich: Non-linear deformation mechanisms during nanoindentation. Acta Mater. 46, 3605 (1998).
43. Z.H. Xu and X.D. Li: Effects of indenter geometry and material properties on the correction factor of Sneddon's relationship for nanoindentation of elastic and elastic-plastic materials. Acta Mater. 56, 1399 (2008).
44. Y.P. Cao, M. Dao, and J. Lu: A precise correcting method for the study of the superhard material using nanoindentation tests. J. Mater. Res. 22, 1255 (2007).
45. J.M. Meza, F. Abbes, and M. Troyon: Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements. J. Mater. Res. 23, 725 (2008).
46. J.J. Vlassak, M. Ciavarella, J.R. Barber, and X. Wang: The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape. J. Mech. Phys. Solids 51, 1701 (2003).