Microstructural characterization of cold-sprayed nanostructured FeAl intermetallic compound coating and its ball-milled feedstock powders

Proceedings of the International Thermal Spray Conference

Volumn , Issue , 2007, Pages 669-676

  Wang, Hong Tao ^a   Li, Chang Jiu ^a   Yang, Guan Jun ^a   Li, Cheng Xin ^a   Zhang, Qiang ^a   Li, Wen Ya ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

Ball milling; Cold spray; Feal; Heat treatment; Microstructure; Nanocrystalline material

Indexed keywords

ALLOYS; ALUMINUM; BALL MILLING; BRITTLENESS; COATINGS; ELECTRON MICROSCOPY; FEEDSTOCKS; FOURIER TRANSFORMS; FRACTURE MECHANICS; GRINDING (MACHINING); HEAT TREATING FURNACES; HEAT TREATMENT; INORGANIC COATINGS; IRON ALLOYS; IRON COMPOUNDS; MECHANICAL ALLOYING; METAL CLADDING; MICROSTRUCTURE; MILLING (MACHINING); MILLING MACHINES; NANOCRYSTALLINE ALLOYS; NANOCRYSTALLINE MATERIALS; NANOCRYSTALLINE POWDERS; OPTICAL MICROSCOPY; PESTICIDES; POWDER COATINGS; POWDERS; SCANNING ELECTRON MICROSCOPY; SEMICONDUCTING INTERMETALLICS; SOLID SOLUTIONS; SPHERES; THERMAL SPRAYING; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS;

AL POWDERS; ALLOY COATINGS; ALLOY POWDERS; AS-MILLED POWDERS; BALL-MILLED; BALL-MILLING PROCESS; COLD SPRAY; COLD SPRAYING; FE-AL INTERMETALLIC COMPOUNDS; FEAL; FEEDSTOCK POWDERS; HEAT-TREATMENT TEMPERATURES; IN-SITU; INTERMETALLIC COMPOUNDS; LAMELLAR MICROSTRUCTURES; LOW TEMPERATURES; METASTABLE ALLOYS; MICRO-STRUCTURAL; MICRO-STRUCTURAL CHARACTERIZATIONS; NANO-STRUCTURED; NANOCRYSTALLINE MATERIAL; POST-HEAT TREATMENTS; SCANNING ELECTRONS; TEM;

INTERMETALLICS;

EID: 59349107397     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (47)

1. A. Papyrin, Cold Spray Technology, Adv. Mater. Process., 2001, 159(9), p. 49-51
2. R.C. McCune, W.T. Donlon, O.O. Popoola, and E.L. Cartwright, Characterization of Copper Layers Produced by Cold Gas-Dynamic Spraying, J. Therm. Spray Technol., 2000, 9, p. 73-82
3. H.K. Kang and S.B. Kang, Tungsten/Copper Composite Deposits Produced by a Cold Spray, Scripta Mater., 2003, 49, p. 1169-1174
4. C.-J. Li and W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167, p. 278-283
5. V. Shukla, G.S. Elliott, B.H. Kear, and L.E. McCandlish. Hyperkinetic Deposition of Nanopowder by Supersonic Rectangular Jet Impingement, Scripta Mater., 2001, 44, p. 2179-2182
6. R.S. Lima, J. Karthikeyan, C.M. Kay, J. Lindemann, and C.C. Berndt, Microstructural Characteristics of Cold-Sprayed Nanostructured WC-Co Coatings, Thin Solid Films, 2002, 416, p. 129-135
7. C.-J. Li, W.-Y. Li, W.-H. Ma, and H. Fukanuma, Characterization of Microstructure of Nanostructured Fe-Si Coating Deposited by Cold Spraying, Thermal Spray Solutions: Advances in Technology and Application, DVS, Düsseldorf, 2004, p. 371-377
8. L. Ajdelsztajn, B. Jodoin, G.E. Kim, and J.M. Schoenung, Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Met. Mat. Trans. A, 2005, 36, p. 657-666
9. C.C. Koch, Synthesis of Nanostructured Materials by Mechanical Milling: Problems and Opportunities, Nanostruct. Mater., 1997, 9, p. 13-22
10. P. Richer, B. Jodoin, E. Sansoucy, L. Ajdelsztajn, and G. E. Kim, Properties of Cold Spray Nickel Based Coatings, ITSC 2006 Proceedings, Seattle, USA, May 15-18, 2006
11. V.K. Sikka, J.T. Mavity, and K. Anderson, Processing of Nickel Aluminides and Their Industrial Applications, Mater. Sci. Eng. A, 1992, 153, p. 712-721
12. C.C. Koch, Intermetallic Matrix Composites Prepared by Mechanical Alloying-A Review, Mater. Sci. Eng. A, 1998, 244, p. 39-48
13. T.E. Mitchell, J.P. Hirth, and A. Misra, Apparent Activation Energy and Stress Exponent in Materials with A High Peierls Stress, Acta Mater., 2002, 50, p. 1087-1093
14. N.S. Stoloff, Iron Aluminides: Present Status and Future Prospects, Mater. Sci. Eng. A, 1998, 258, p. 1-14
15. P.F. Tortorelli and K. Natesan, Critical Factors Affecting the High-Temperature Corrosion Performance of Iron Aluminides, Mater. Sci. Eng. A, 1998, 258, p. 115-125
16. Y. Yang and I. Baker, The Influence of Vacancy Concentration on the Mechanical Behavior of Fe-40A1, Intermetallics, 1998, 6, p. 167-175
17. I. Baker, X. Li, H. Xiao, R. Carleton, and E.P. George, The Room Temperature Strengthening Effect of Boron as a Function of Aluminum Concentration in FeAl, Intermetallics, 1998, 6, p. 177-183
18. M.A. Muñoz-Morris, C. Garcia Oca, and D.G. Morris, Microstructure and Room Temperature Strength of Fe-40Al Containing Nanocrystalline Oxide Particle, Acta Mater., 2003, 51, p. 5187-5197
19. D.G. Morris and S. Gunther, Strength and Ductility of Fe-40Al Alloy Prepared by Mechanical Alloying, Mater. Sci. Eng. A, 1996, 208, p. 7-19
20. M.A. Morris-Muñoz, A. Dodge, and D.G. Morris, Structure, Strength and Toughness of Nanocrystalline FeAl, Nanostruct. Mater., 1999, 11, p. 873-885
21. M. Hoffmann and R. Birringer, Elastic and Plastic Behavior of Submicrometer-sized Polycrystalline NiAl, Acta Mater., 1996, 44, p. 2729-2736
22. M. Krasnowski and T. Kulik, Nanocrystalline FeAl Intermetallic Produced by Mechanical Alloying Followed by Hot-Pressing Consolidation, Intermetallics, 2007, 15, p. 201-205
23. M.A. Morrisand and M. Leboeuf, Grain-size Refinement of γ-Ti-Al Alloys: Effect on Mechanical Properties, Mater. Sci. Eng. A, 1997, 224, p. 1-11
24. T.R. Malow and C.C. Koch, Mechanical Properties in Tension of Mechanically Attrited Nanocrystalline Iron by the Use of the Miniaturized Disk Bend Test, Acta Mater., 1998, 46, p. 6459-6473
25. H.G. Jiang, M.L. Lau, and E.J. Lavernia, Grain Growth Behavior of Nanocrystalline Inconel 718 and Ni Powders and Coatings, Nanostruct. Mater., 1998, 10, p. 169-178
26. J.A. Hearley, J.A. Little, and A.J. Sturgeon, The Effect of Spray Parameters on the Properties of High Velocity Oxy-Fuel NiAl Intermetallic Coatings, Surf. Coat. Technol., 2000, 123, p. 210-218
27. T. Grosdidier, A. Tidu, and H.L. Liao, Nanocrystalline Fe-40Al Coating Prepared by Thermal Spraying of Milled Powder, Scipta Mater., 2001, 44, p. 387-393
28. H.-T. Wang, C.-J. Li, G.-J. Yang, and C.-X. Li, Formation of Fe-Al Intermetallic Compound Coating Through Cold Spraying, ITSC 2006 Proceedings, Seattle, USA, May 15-18. 2006
29. B.D. Cullity and S.R. Stock, Elements of X-ray Diffraction, (3rd ed.). Prentice Hall, Upper Saddle River, NJ, 2001. p. 399-402
30. L. Shaw, H. Luo, J. Villegas, and D. Miracle, Thermal Stability of Nanostructured Al93Fe3Cr2Ti2 Alloys Prepared via Mechanical Alloying, Acta. Meter., 2003, 51, p. 2647-2663
31. C. Suryanarayana, Mechanical Alloying and Milling, Prog. Mater. Sci., 2001, 46, p. 1-184
32. H. Skoglund, M.K. Wedel, and B. Karlsson, The Role of Oxygen in Powder Processing of FeAl, Intermetallics, 2003, 11, p. 475-482
33. G. Ji, O. Elkedim, and T. Grosdidier, Deposition and Corrosion Resistance of HVOF Sprayed Nanocrystalline Iron Aluminide Coatings, Surf Coat. Technol., 2005, 190, p. 406-416
34. M. Fukumoto, W, Hu, T. Katoh, and M. Yamasaki, Synthesis of Nanocrystalline Iron Aluminide Intermetallic Compound Coating by Spraying of Mechanically Alloyed Powder, ITSC 2004 Proceedings. Osaka, Japan, May 10-12, 2004
35. K. Wolski, F. Thévenot, and J. le Coze, Effect of Nanometric Oxide Dispersion on Creep Resistance of ODS-FeAl Prepared by Mechanical Alloying, Intermetallics, 1996, 4, p. 299-307
36. H.Y. Lee, S.H. Jung, S.Y. Lee, and K.H. Ko, Alloying of Coldsprayed Al-Ni Composite Coatings by Post-annealing, Appl. Surf. Sci., 2007, 253, p. 3496-3502
37. T. Novoselova, S. Celotto, R. Morgan, P. Fox, and W. O'Neill, Formation of TiAl Intermetallics by Heat Treatment of Cold-Sprayed Precursor Deposits, J. Alloys Compd., 2007, 436, p. 69-77
38. R.J. Perez, B. Huang, and E.J. Lavernia, Thermal Stability of Nanocrystalline Fe-10 wt.% Al Produced by Cryogenic Mechanical Alloying, Nanostruct. Mater., 1996, 7, p. 565-572
39. R.J. Perez, H.G. Jiang, and E.J. Lavernia, Grain Size Stability of Nanocrystalline Cryomilled Fe-3 wt.% Al alloy, Nanostruct. Mater., 1997, 9, p. 71-74
40. B. Huang, R.J. Perez, and E.J. Lavernia, Grain Growth of Nanocrystalline Fe-Al Alloys Produced by Cryomilling in Liquid Argon and Nitrogen, Mater. Sci. Eng. A, 1998, 255, p. 124-132
41. H.G. Jiang, H.M. Hu, and E.J. Lavernia, Synthesis of Fe-rich Fe-Al Nanocrvstalline Solid Solutions Using Ball Milling, J. Mater. Res., 1999, 14, p. 1760-1770
42. P. Knauth, A. Charaï, and P. Gas, Grain Growth of Pure Nickel and of a Ni-Si Solid Solution Studied by Differential Scanning Calorimetry on Nanometer-Sized Crystals, Scripta Metall. Mater., 1993, 28, p. 325-330
43. 2 and Its Relation to Vickers Hardness and Fracture Toughness, Scripta Metall. Mater., 1990, 24, p. 2401-2406
44. K. Boylan, D. Ostrander, U. Erb, G. Palumbo, and K.T. Aust, An In-Situ Tem Study of the Thermal Stability of Nanocrystalline Ni_P, Scripta Metall. Mater., 1991, 25, p. 2711-2716
45. Z. Gao and B. Fultz, The Thermal Stability of Nonocrystalline Fe-Si-Nb Prepared by Mechanical Alloying, Nanostruct. Mater., 1993, 2, p. 231-240
46. Z. Gao and B. Fultz, Inter-Dependence of Grain Growth, Nb Segregation, and Chemical Ordering in Fe-Si-Nb Nanocrystals, Nanostruct. Mater., 1994, 4, p. 939-947
47. 3Si, Nanostruct. Mater., 1995, 5, p. 327-336