Intermetallic matrix composites prepared by mechanical alloying - A review

Materials Science and Engineering: A

Volumn 244, Issue 1, 1998, Pages 39-48

  Koch, C C ^a  

^a Electrical and Computer Engineering Department   (United States)

Author keywords

Intermetallic matrix composites; Mechanical alloying; Review

Indexed keywords

INTERMETALLICS; MECHANICAL ALLOYING; MECHANICAL PROPERTIES; METALLOGRAPHIC MICROSTRUCTURE; NANOSTRUCTURED MATERIALS; REINFORCEMENT;

CRYOMILLING; DISCONTINUOUS SECOND PHASE; DISPERSOID; INTERMETALLIC MATRIX COMPOSITE; SUPERPLASTIC FORMING;

METALLIC MATRIX COMPOSITES;

EID: 0002671457     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0921-5093(97)00824-1     Document Type: Article

References (66)

1. R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal (Eds.), Structural Intermetallics, TMS, Warrendale, PA, 1993.
2. J.H. Westbrook, R.L. Fleischer (Eds.), Intermetallic Compounds, Principles and Practice, vol. 2, Wiley, Chichester, 1995.
3. C.T. Liu, Metall. Trans. 4 (1973) 1743; C.T. Liu, J. Nucl. Mater. 85-86 (1979) 907.
4. C.T. Liu, Metall. Trans. 4 (1973) 1743; C.T. Liu, J. Nucl. Mater. 85-86 (1979) 907.
5. K. Aoki, O. Izumi, Nippon Kinzoku Gakkaishi 43 (1979) 1190.
6. D.L. Anton, R. McMeeking, D. Miracle, P. Martin (Eds.), Intermetallic Matrix Composites, Mat. Res. Soc. Symp. Proc. 194, Pittsburgh, PA, 1990.
7. D.B. Miracle D.L. Anton, J.A. Graves (Eds.), Intermetallic Matrix Composites I, Mat. Res. Soc. Symp. Proc. 273, Pittsburgh, PA, 1992.
8. J.A. Graves, R.R. Bowman, J.J. Lewandowski (Eds.), Intermetallic Matrix Composites III, Mat. Res. Soc. Symp. Proc. 350, Pittsburgh, PA, 1994.
9. D.B. Miracle, M.G. Mendiratta, in: J.H. Westbrook, R.L. Fleischer (Eds.), Intermetallic Composites in Intermetallic Compounds, vol. 2, Wiley, Chichester 1994, pp. 287-300.
10. J. Sorensen, in: R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal (Eds.), Continuous Fiber Reinforced Intermetallic Composites - An Overview in Structural Intermetallics, TMS, Warrendale, PA, 1993, pp. 171-726.
11. J.S. Benjamin, Metall. Trans, 1 (1970) 2943.
12. C.C. Koch, in: R.W. Cahn et al. (Eds.), Materials Science and Technology, vol. 15, VCH, Weinheim, Germany, 1991, p. 193.
13. C.C. Koch, Mater. Res. Soc. Symp. Proc. 81 (1987) 369.
14. C.C. Koch, J.D. Whittenberger, Intermetallics 4 (1996) 339.
15. F.V. Lenel, G.S. Ansell, E.C. Nelson, Trans. AIME 209 (1957) 117.
16. J.-L. Strudel, in: R.W. Cahn, P. Haasen (Eds.), Mechanical Properties of Multiphase Alloys in Physical Metallurgy, 3rd ed., North Holland, 1983, pp. 1415-1416 and references cited therein.
17. G.S. Ansell, The mechanism of dispersion strengthening: a review, in: G.S. Ansell, T.D. Copper, F.V. Lenel (Eds.), Oxide Dispersion Strengthening Proc. 2nd Bolton Landing Conference, Gordon and Breach, 1968, p. 61.
18. M.F. Ashby, The theory of the critical shear stress and work hardening of dispersion-hardened crystals, in: G.S. Ansell, T.D. Copper, F.V. Lenel (Eds.), Oxide Dispersion Strengthening Proc. 2nd Bolton Landing Conference, Gordon and Breach, 1968, p. 143.
19. E. Orowan, Symp. on Internal Stresses in Metals and Alloys, Institute of Metals, 1948, p. 451.
20. L.M. Brown, R.K. Ham, in: A Kelly, R.B. Nicholson (Eds.), Strengthening Methods in Crystals, Wiley, New York, 1971, p. 9.
21. M.F. Asbhy, in: A Kelly, R.B. Nicholson (Eds.), Strengthening Methods in Crystals, Wiley, New York, 1971, pp. 137-192.
22. S.M.L. Sastry, B. Ramaswami, Acta Metall. 23 (1975) 1517.
23. S. Pattanaik, A.J. Ardell, Phil. Mag. A 45 (1982) 1047.
24. A.U. Seybolt, Trans. ASM 59 (1966) 860.
25. E.R. Slaughter, S.K. Das, in: R. Mehrabian, B.H. Kear, M. Cohen (Eds.), Proc. of the 2nd Int. Conf. on Rapid Solidification Processing, Claitor's Publishing Division, Baton Rouge, LA, 1980, p. 354.
26. D.G. Konitzer, H.L. Fraser, Mater. Res. Soc. Symp. Proc. 39 (1985) 437.
27. R.G. Rowe, J.A. Sutcliff, E.F. Koch, Mater. Res. Soc. Symp. Proc. 58 (1986) 359.
28. J.A. Sutcliff, R.G. Rowe, Mater. Soc. Symp. Proc. 58 (1996) 371.
29. J.S.C. Jang, C.C. Koch, Scr. Metall. 22 (1988) 677.
30. J.S.C. Jang, S.G. Donnelly, P. Godavarti, C.C. Koch, Int. J. Powder Metall. 24 (1988) 315.
31. K. Vedula, S.D. Strothers, in: A.H. Clauer, J.J. De Barbadillo (Eds.), Solid State Powder Processing, TMS, Warrendale, PA, 1990, pp. 213-223.
32. J.H. Schneibel, P. Grahle, J. Rösler, Mater. Sci. Eng. A153 (1992) 684.
33. D.G. Morris, M.A. Morris, Mater. Sci. Eng. A125 (1990) 97.
34. S. Dymek, M. Dollar, S.J. Hwang, P. Nash, Mater. Sci. Eng. A152 (1992) 160.
35. J.M. Kostrubanic, J.B. Breedis, D.A. Koss, I. Locci, J.M. Poole, in: R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal, Structural Intermetallics, TMS, Warrendale, PA, 1993, p. 543.
36. E. Arzt, E. Göhring, P. Grahle, Mater. Res. Soc. Symp. Proc. 288 (1993) 861.
37. S.V. Raj, in: S. Ochiai (Ed.), Mechanical Properties of Metallic Composites, Dekker, New York, 1994, pp. 97-183.
38. J.D. Whittenberger, in: E. Arzt, L. Schultz, New Materials by Mechanical Alloying Techniques, DGM, Oberursel, Germany, 1989, pp. 200-215.
39. E. Arzt, D.S. Wilkinson, Acta Metall. 34 (1986) 1893.
40. E. Arzt, J. Rösler, Acta Metall. 36 (1988) 1053.
41. J. Rösler, E. Arzt, Acta Metall. Mater. 38 (1990) 671.
42. E. Arzt, P. Grahle, Mater. Res. Soc. Symp. Proc. 364 (1995) 525.
43. R.C. Benn, P.K. Mirchandani, A.S. Watwe, in: A.H. Clauer, J.J. De Barbadillo, Solid State Powder Processing, TMS, Warrendale, PA, 1990, pp. 157-171.
44. R.P. Mason, N.J. Grant, Mater. Sci. Eng. A192-193 (1995) 741.
45. C. Suryanarayana, F.H. Froes, Adv. Mater. 5 (1993) 96.
46. C. Suryanarayana, R. Sundaresan, F.H. Froes, in: T.G. Gabarre, W.F. Jandeska, Jr. (Eds.), Adv. in Power Met. 1989, 3, MPIF, Princeton, NJ, 1989, p. 175.
47. C. Suryanarayana, R. Sundaresan, F.H. Froes, in: F.H. Froes, J.J. De Barbadillo (Eds.), Structural Applications of Mechanical Alloying, ASM International, Materials Park, OH, 1990, pp. 193.
48. Y.-L. Jeng, E.J. Lavernia, J. Mater. Sci. 29 (1994) 2557.
49. D.A. Hardwick, P.L. Martin, S.N. Patankar, J.J. Lewandowski, in: R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal, Structural Intermetallics, TMS, Warrendale, PA, 1993, pp. 665-674.
50. Y.S. Kim, M.R. Johnson, R. Abbaschian, M.J. Kaufman, Mater. Res. Soc. Symp. Proc. 213 (1991) 839.
51. S. Jayashankar, M.J. Kaufman, J. Mater. Res. 8 (1993) 1428.
52. M.T. Kush, J.W. Holmes, R. Gibala, Mater. Res. Soc. Symp. Proc. 350 (1994) 189.
53. M.J. Luton, C.S. Jayanth, M.M. Disko, S. Matras, J. Vallone, Mater. Res. Soc. Symp. Proc. 132 (1989) 79.
54. J.D. Whittenberger, E. Arzt, M.J. Luton, J. Mater. Res. 5 (1990) 271.
55. B.J.M. Aikin, R.M. Dickerson, D.T. Jayne, S. Farmer, J.D. Whittenberger, Scr. Metall. Mater. 30 (1994) 119.
56. A. Garg, J.D. Whittenberger, B.J.M. Aikin, Mater. Res. Soc. Symp. Proc. 350 (1994) 231.
57. M.G. Hebsur, J.D. Whittenberger, C.E. Lowell, A. Garg, Mater. Res. Soc. Symp. Proc. 364 (1995) 579.
58. M. Jain, T. Christman, Acta. Metall. Mater. 42 (1994) 1901.
59. C. Suryanarayana, G.E. Korth, F.H. Froes, J. Hebeisen, in: D.L. Bourell (Ed.), Synthesis and Processing of Nanocrystalline Powder, TMS, Warrendale, PA, 1996, p. 133.
60. L. He, J.Y. Huang, E. Ma, in: D.L. Bourell (Ed.), Synthesis and Processing of Nanocrystalline Powder, TMS, Warrendale, PA, 1996, p. 111.
61. E.M. Schulson, Res. Mech. Lett. 1 (1981) 111; E.M. Schulson, D.R. Barker, Scripta Metall. 17 (1983) 519.
62. E.M. Schulson, Res. Mech. Lett. 1 (1981) 111; E.M. Schulson, D.R. Barker, Scripta Metall. 17 (1983) 519.
63. K.S. Chan, Scr. Metall. Mater. 24 (1990) 1725.
64. R. Bohn, T. Haubold, R. Birringer, H. Gleiter, Scr. Metall. Mater. 25 (1991) 811.
65. Th. Pfullmann, M. Oehring, R. Bohn, R. Bormann, Mater. Sci. Forum 225-227 (1996) 757.
66. R. Bohn, M. Oehring, Th. Pfullmann, F. Appel, R. Bormann, in: C. Suryanarayana, J. Singh, F.H. Froes, Processes and Properties of Nanocrystalline Materials, TMS, Warrendale, PA, 1996, p. 355.