A review of failure mechanisms of ultra-high cycle fatigue in engineering materials

VHCF-4 - 4th International Conference on Very High Cycle Fatigue

Volumn , Issue , 2007, Pages 437-444

  Tian, H ^a   Kirkham, M J ^a   Jiang, L ^b   Yang, B ^a   Wang, G ^a   Liaw, P K ^a  

^a University of Tennessee Knoxville   (United States)

^b GENERAL ELECTRIC COMPANY   (United States)

Author keywords

Crack initiation; Endurance limit; Fatigue life; Ultra high cycle fatigue

Indexed keywords

CRACK INITIATION; CRACKS; DURABILITY; FATIGUE CRACK PROPAGATION; HYDROGEN; HYDROGEN EMBRITTLEMENT; LIFE CYCLE; METALLIC COMPOUNDS; SAFETY ENGINEERING; STRESS CORROSION CRACKING;

AND MODELS; EMBRITTLEMENT MECHANISMS; ENDURANCE LIMIT; ENGINEERING MATERIALS; FAILURE MECHANISMS; FATIGUE BEHAVIORS; FATIGUE FAILURES; FATIGUE LIFE; FATIGUE LIMITS; FERROUS ALLOYS; INFINITE LIVES; NUMBER OF CYCLES TO FAILURES; PARAMETER MODELS; SLIP MECHANISMS; ULTRA-HIGH CYCLE FATIGUE;

FATIGUE OF MATERIALS;

EID: 58349085320     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (35)

1. C. Bathias: "A New Concept of SN Curve and Fatigue Strength in Gigacycle Fatigue," presented at David L. Davidson Symposium, TMS, (2002), unpublished research.
2. A. Shaniavski, G. Skvortsov, Fat. Fract. Eng. Mater. Struct. 22 (1999) 609-619.
3. C. Muhlstein, S. Brown, R.O. Ritchie, J. MEMC Sys. 10 (2001) 593-600.
4. C. Muhlstein, E. Stach, R.O. Ritchie, Appl. Phys. Lett. 80 (2002) 1532-1534.
5. C. Muhlstein, S. Brown, R.O. Ritchie, Sens. Act. A. 94 (2001) 177-188.
6. C. Muhlstein, R. Howe, R.O. Ritchie, Mech. Mater. 36 (2004) 13-33.
7. S. Nishijima, K. Kanazawa, Fat. Fract. Eng. Mater. Struct. 22 (1999) 601-607.
8. L. Jiang, "Fatigue Behavior of ULTIMET Alloy, Experiment and Theoretical Modeling," Ph.D. thesis, University of Tennessee, Knoxville. (2000)48-74.
9. C. Bathias, Fat. Fract. Eng. Mater. Struct. 22 (1999) 559-565.
10. L. Jiang, C.R. Brooks, P.K. Liaw, H. Wang, C. Rawn, D. Klarsrrom, Mater. Sci. Eng. A314 (2001) 162-175.
11. T. Sakai, M. Takeda, K. Shiozawa, Y. Ochi, M. Nakajima, T. Nakamura, N. Oguma, Fatigue '99, Proc, the Seventh International Fatigue Congress, EMAS Publishing, Sheffield, UK. (1999)573-578.
12. Y. Murakami, T. Nomoto, T. Ueda, Fat. Fract. Eng. Mater. Struct. 22 (1999) 581-590.
13. H. Mughrabi, Proc., Fatigue - David L. Davidson Symposium, TMS, Warrendale, PA. (2002)3-15.
14. K. Miller, W. O'Donnell, Fat. Fract. Eng. Mater. Struct. 22 (1999) 545-557.
15. K. Shiozawa, S. Nishino, K. Yamamoto, L. Lu, Fatigue 2002, Proc., the Eighth International Fatigue Congress, EMAS Publishing, Sheffield, UK. (2002) 2939-2946.
16. H. Matsunaga, R. Ezaki, Y. Murakami, Fatigue 2002, Proc., the Eighth International Fatigue Congress, EMAS Publishing, Sheffield, UK. (2002) 2525-2532.
17. Y. Murakami, Fatigue 2002, Proc., the Eighth International Fatigue Congress, EMAS Publishing, Sheffield, UK. (2002) 2927-2938.
18. Y. Murakami, T. Toriyama, K. Tsubota, K. Furumura, Bearing Steels, Into the 21st Century, ASTM STP 1327, ASTM, Ann Arbor, MI. (1998) 87-105.
19. Y. Furuya, S. Matsuoka, T. Abe, K. Yamaguchi, Scripta Mater. 46 (2002) 157-162.
20. Q.Y. Wang, J.Y. Berard, A. Dubarre, G. Baudry, S. Rathery, C. Bathias, Fat. Fract. Eng. Mater. Struct. 22 (1999) 667-672.
21. H. Mughrabi, Fat Fract. Eng. Mater. Struct. 22 (1999) 633-641.
22. Y. Furuya, S. Matsuoka, T. Abe, K. Yamaguchi, Fatigue 2002, Proc., the Eighth International Fatigue Congress, EMAS Publishing, Sheffield, UK. (2002) 2955-2962.
23. H. Tian, P.K. Liaw, D. Fielden, L. Jiang, B. Yang, C.R. Brooks, M.D. Brotherton, H. Wang, J.P. Strizak, L.K. Mansur. Metall. Mater. Trans. 37A (1) (2006) 163-173.
24. H. Tian, P. K. Liaw, J.P. Strizak, L.K. Mansur, J. Nucl. Mater. 318 (2003) 157-166.
25. H. Tian, P.K. Liaw, J.P. Strizak, L.K. Mansur, Proc., Mechanisms and Mechanics of Fracture, TMS, Warrendale, PA. (2002) 93-102.
26. T. Sakai, M. Takeda, N. Oguma, Fatigue 2002, Proc, the Eighth International Fatigue Congress, EMAS Publishing, Sheffield, UK. (2002) 2987-2994.
27. H. Wang, L.Jiang, P.K. Liaw, D.L. Klarstrom, Metall. Mater. Trans. 31A (2000) 1307-1310.
28. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, D.L. Klarstrom, Metall. Mater. Trans. 32A (2001) 2279-2296.
29. B. Yang, P.K. Liaw, H. Wang, L. Liang, J.Y. Huang, R.C. Kuo, J.G. Huang, Mater. Sci. Eng. A314 (2001) 131-139.
30. H. Wang, L. Jiang, Y.H. He, L.J. Chen, P.K. Liaw, R.R. Seeley, D.L. Klarstrom, Metall. Mater. Trans. 33A (2002) 1287-1292.
31. B. Yang, J. Mater. Eng. Perf. 12 (2003) 345-353.
32. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, L. Chen, D.L. Klarstrom, Metall. Mater. Trans. 35A (2004) 839-848.
33. L.J. Chen, P.K. Liaw, H. Wang, Y.H. He, R.L. McDaniels, L. Jiang, B. Yang, D.L. Klarstrom, Mech. Mater. 36 (2004) 85-98.
34. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, D.L. Klarstrom, Mech. Mater. 36 (2004) 73-84.
35. B. Yang, P.K. Liaw, G. Wang, W.H. Peter, R.A. Buchanan, Y. Yokoyama, J.Y. Huang, R.C. Kuo, J.G. Huang, D.E. Fielden, D.L. Klarstrom, Metall. Mater. Trans. 35A (2004) 15-23.