Thermal-Imaging Technologies for Detecting Damage during High-Cycle Fatigue

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 1, 2004, Pages 15-23

  Yang, B ^a   Liaw, P K ^a   Wang, G ^a   Peter, W H ^a   Buchanan, R A ^a   Yokoyama, Y ^b   Huang, J Y ^c   Kuo, R C ^c   Huang, J G ^d,e   Fielden, D E ^a   Klarstrom, D L ^f  

^a UNIVERSITY OF TENNESSEE   (United States)

^b UNIVERSITY OF HYOGO   (Japan)

^c INSTITUTE OF NUCLEAR ENERGY RESEARCH   (Taiwan)

^d TAIWAN POWER COMPANY   (Taiwan)

^e CHIENKUO TECHNOLOGY UNIVERSITY   (Taiwan)

^f HAYNES INTERNATIONAL INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL ANALYSIS; FRACTURE; HEAT TRANSFER; NONDESTRUCTIVE EXAMINATION; PLASTIC DEFORMATION; PRESSURE VESSELS; THERMOGRAPHY (IMAGING);

STRESS-STRAIN STATES;

FATIGUE OF MATERIALS;

EID: 10744231494     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-0104-x     Document Type: Article

References (51)

1. L. Margulies, G. Winther, and H.F. Poulsen: Science, 2001, vol. 291, pp. 2392-94.
2. B.C. Larson, W. Yang, G.E. Ice, J.D. Budai, and J.Z. Tischler: Nature, 2002, vol. 415, pp. 887-90.
3. Y.D. Wang, H. Tian, A.D. Stoica, X. Wang, P.K. Liaw, and J.W. Richardson: Nature Mater., 2003, Feb., pp. 101-06, http://www.nature.com/cgi-taf/DynaPage.taf?file=/nmat/journal/v2/n2/full/ nmat812.html
4. L. Jiang, M. Huang, C.R. Brooks, and P.K. Liaw: in Nondestructive Evaluation (NDE) and Materials Properties IV, P.K. Liaw, R.J. Arsenault, R.E. Green, Jr., K.L. Murty, and R.B. Thompson, eds., TMS, Warrendale, PA, 1999, pp. 43-60.
5. M.E. Fine, Z.M. Connor, and J.D. Achenbach: in Nondestructive Evaluation (NDE) and Materials Properties IV, P.K. Liaw, R.J. Arsenault, R.E. Green, Jr., K.L. Murty, and R.B. Thompson, eds., TMS, Warrendale, PA, 1999, pp. 1-9.
6. G. Birnbaum and G. Free: Eddy-Current Characterization of Materials and Structures: a Symposium/Sponsored by ASTM Committee E-7 on Nondestructive Testing, Gaithersburg, MD, Sept. 5-7, 1979, ASTM, Philadelphia, PA, 1979.
7. A.A Moss and H.I Goldberg: Computed Tomography, Ultrasound and X-ray: an Integrated Approach, Masson Publication, New York, 1979.
8. L. Jiang, P.K. Liaw, C.R. Brooks, B. Somieski, and D.L. Klarstrom: Mater. Sci. Eng. A, 2001, vol. 313 (1-2), pp. 153-59.
9. H. Jeong, D.K. Hsu, and P.K. Liaw: Compos. Sci. Technol., 1998, vol. 58 (1), pp. 65-76.
10. P.K. Liaw, D.K. Hsu, N. Yu, N. Miriyala, and H. Jeong: Acta Mater., 1996, vol. 44 (5), pp. 2101-13.
11. R. Pitchumany, P.K. Liaw, S.C. Yao, D.K. Hus, and H. Jeong: Acta Metall. Mater., 1995, vol. 43 (8), pp. 3045-59.
12. H. Jeong, D.K. Hsu, R.E. Shannon, and P.K. Liaw: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 799-809.
13. L. Chaerle, W.V. Caeneghem, E. Messens, H. Lambers, M.V. Montagu, and D.V.D. Straeten: Nature Biotechnol., 1999, vol. 17, pp. 813-16.
14. B.M. Gratt and M. Anbar: Dentomaxillofacial Radiology, 1998, vol. 27, pp. 68-74.
15. S.J. Taylor and J.P. Morken: Science, 1998, vol. 280, pp. 267-70.
16. H. Ay, J. Jang, and J.N. Yeh: Int. J. Heat Mass Transfer, 2002, vol. 45 (20), pp. 4069-78.
17. W. Bai and B.S. Wong: Measurement Sci. Technol., 2002, vol. 13 (5), pp. 700-05.
18. B. Marwaha and D. Luss: AIChE J., 2002, vol. 48 (3), pp. 617-24.
19. G.I. Taylor and H. Quinney: Proc. R. Soc. A, 1934, vol. 143, pp. 307-26.
20. J.R. Rice and N. Levy: The Physics of Strength and Plasticity, A.S. Argon, ed., MIT Press, Cambridge, MA, 1969, pp. 277-92.
21. D.T. Lohr, N.F. Enke, and B.I. Sandor: in Dynamic Failure: Proc. 1987 SEM Fall Conf., Savannah, GA, October 25-27, 1987, Society for Experimental Mechanics, Brookfield Center, CT, 1987, pp. 169-74.
22. P.K. Liaw, H. Wang, L. Jiang, B. Yang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Scripta Mater., 2000, vol. 42, pp. 389-95.
23. P.R. Guduru, A.T. Zehnder, A.J. Rosakis, and G. Ravichandran: Eng. Fracture Mech., 2001, vol. 68, pp. 1535-56.
24. P.R. Guduru, A.J. Rosakis, and G. Ravichandran: Mech. Mater., 2001, vol. 33, pp. 371-402.
25. M.P. Luong: Mech. Mater., 1998, vol. 28, pp. 155-63.
26. Y. Yokoyama, H. Inoue, K. Fukaura, and A. Inoue: Mater. Trans., 2002, vol. 43 (3), pp. 575-79.
27. Y. Yokoyama, A. Kobayashi, K. Fukaura, and A. Inoue: Mater. Trans., 2002, vol. 43 (3), pp. 571-74.
28. W.H. Peter, P.K. Liaw, R.A. Buchanan, C.T. Liu, C.R. Brooks, J.A. Horton, C.A. Carmichael, and J.L. Wright: Intermetallics, 2002, vol. 10 (11-12), pp. 1125-29
29. W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw, M.L. Morrison, J.A. Horton, C.A. Carmichael, and J.L. Wright: Intermetallics, 2002, vol. 10 (11-12), pp. 1157-62.
30. W.H. Peter, R.A. Buchanan, C.T. Liu, and P.K. Liaw: J. Non-Crystalline Solids, 2003, vol. 317 (1-2), pp. 187-92.
31. P.K. Liaw, A. Saxena, and J. Perrin: Eng. Fract. Mech., 1993, vol. 45 (6), pp. 759-86.
32. P.K. Liaw, M.G. Peck, G.E. Rudd, and T.K. Lai: Eng. Fract. Mech., 1992, vol. 43 (3), pp. 379-400.
33. W.A. Logsdon, P.K. Liaw, and M.A. Burke: Eng. Fract. Mech., 1990, vol. 36 (2), pp. 183-218.
34. P.K. Liaw, W.A. Logsdon, and J.A. Begley: Metall. Trans. A, 1989, vol. 20A, pp. 2069-085.
35. P.K. Liaw, W.A. Logsdon, and M.A. Burke: Scripta Metall., 1989, vol. 23 (5), pp. 747-52.
36. M.A. Biot: J. Appl. Phys., 1956, vol. 27 (3), pp. 240-53.
37. R. Rocca and M.B. Bever: Trans. Am. Inst. Mech. Eng., 1950, vol. 188, pp. 327-33.
38. B. Yang, P.K. Liaw, H. Wang, L. Jiang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Mater. Sci. Eng., 2001, vol. A314, pp. 131-39.
39. O.W. Dillon: J. Mech. Phys. Solids, 1963, vol. 11, pp. 21-23.
40. S.R. Bodner, I. Partom, and Y. Partom: J. Appl. Mech., 1979, vol. 46, pp. 805-10.
41. P.K. Liaw, B. Yang, H. Tian, L. Jiang, H. Wang, J.Y. Huang, R.C. Kuo, J.G. Huang, D. Fielden, J.P. Strizak, and L.K. Mansur: Fatigue and Fracture Mechanics: 33rd Volume, ASTM STP 1417, W.G. Reuter and R.S. Piascik, eds., ASTM International, West Conshohocken, PA, 2002, pp. 524-56.
42. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2279-96.
43. H. Wang, L. Jiang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1307-10.
44. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Trans. Nonferrous Met. Soc. China, 2002, vol. 12, pp. 734-47.
45. H. Wang, L. Jiang, Y.H. He, L.J. Chen, P.K. Liaw, R.R. Seeley, and D.L. Klarstrom: Metall Trans. A, 2002, vol. 33A, pp. 1287-92.
46. L.J Chen, P.K. Liaw, H. Wang, Y.H. He, R.L. McDaniels, L. Jiang, B. Yang, and D.L. Klarstrom: Mechanics of Materials, 36, 2004, pp. 85-98.
47. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, L. Chen, and D.L. Klarstrom: Metallurgical and Materials Transactions A, in press.
48. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Mechanics of Materials, 36, 2004, pp. 73-84.
49. B. Yang: Journal of Materials Engineering and Performance, 12 (3), 2003, pp. 345-53.
50. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton, and A. Inoue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811-20.
51. P.K. Liaw, G.Y. Wang, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: 2005 Annual TMS Meeting, Dr. C.T. Liu Symp., San Diego, CA, March 2-6, 2003, unpublished research.