Effects of frequency on fatigue behavior of type 316 low-carbon, nitrogen-added stainless steel in air and mercury for the spallation neutron source

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 37, Issue 1, 2006, Pages 163-173

  Tian, H ^a,b   Liaw, P K ^a   Fielden, D E ^a   Jiang, L ^c   Yang, B ^d   Brooks, C R ^a   Brotherton, M D ^a   Wang, H ^d   Strizak, J P ^d   Mansur, L K ^d  

^a University of Tennessee Knoxville   (United States)

^b IDAHO NATIONAL LABORATORY   (United States)

^c GE GLOBAL RESEARCH   (United States)

^d OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR; CARBON; COOLING; FATIGUE OF MATERIALS; MERCURY (METAL); NITROGEN; STAINLESS STEEL; THERMAL EFFECTS;

COMPANION TESTS; FATIGUE BEHAVIOR; LOW-CARBON; NITROGEN-ADDED STAINLESS STEEL; SPALLATION NEUTRON SOURCE; STRIATION SPACING;

NEUTRON SOURCES;

EID: 31644447428     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0161-4     Document Type: Article

References (70)

1. S. Suresh: Fatigue of Materials, 2nd ed., Great Britain at the University Press, Cambridge, United Kingdom, 1998.
2. T.A. Gabriel, J.M. Barnes, L.A. Charlton, J.R. DiStefano, K. Farrell, J. Haines, J.O. Johnson, L.K. Mansur, S.J. Pawel, M. Siman-Tov, R. Taleyarkhan, T.J. McManamy, and M.J. Rennick: Proc. Topical Meeting on Nuclear Applications of Accelerator Technology, American Nuclear Society Winter Meeting, Albuquerque, NM, Nov. 16-20, 1997, American Nuclear Society, LaGrange Park, IL, 1997, pp. 288-92.
3. L.K. Mansur, T.A. Gabriel, J.R. Haines, and D.C. Lousteau: J. Nucl. Mater., 2001, vol. 296, pp. 1-16.
4. L.K. Mansur: J. Nucl. Mater., 2003, vol. 318, pp. 14-25.
5. M. Botshekan, S. Degallaix, and Y. Desplanques: Mater. Sci. Eng. A, 1997, vols. 234-236, pp. 463-66.
6. J.B. Vogt, J. Foct, C. Regnard, G. Robert, and J. Dhers: Metall. Trans. A, 1991, vol. 22A, pp. 2385-92.
7. T.S. Byun, K. Farrell, E.H. Lee, L.K. Mansur, S.A. Maloy, M.R. James, and W.R. Johnson: J. Nucl. Mater., 2002, vol. 303, pp. 34-43.
8. E.H. Lee, T.S. Byun, J.D. Hunn, K. Farrell, and L.K. Mansur: J. Nucl. Mater., 2001, vol. 296, pp. 183-91.
9. S.J. Pawel, J.R. DiStefano, and E.T. Manneschmidt: J. Nucl. Mater., 2001, vol. 296, pp. 210-18.
10. H. Tian, P.K. Liaw, H. Wang, D. Fielden, J.P. Strizak, L.K. Mansur, and J.R. DiStefano: Mater. Sci. Eng. A, 2001, vol. 314 (1-2), pp. 140-49.
11. H. Tian, P.K. Liaw, D. Fielden, L. Jiang, B. Yang, C.R. Brooks, D.D. Bruns, M.D. Brotherton, H. Wang, J.P. Strizak, L.K. Mansur, J.R. DiStefano, K. Farrell, D.C. Lousteau, S.J. Pawel, and G.T. Yahr: Proc. Symp. on Fatigue and Fracture Behavior of High Temperature Materials, TMS/ASM Fall Meeting, St. Louis, MO, Oct. 8-12, 2000, P.K. Liaw, ed., TMS, Warrendale, 2000, pp. 37-40.
12. J.P. Strizak, J.R. DiStefano, P.K. Liaw, and H. Tian: J. Nucl. Mater., 2001, vol. 296, pp. 225-30.
13. H. Tian, P.K. Liaw, D. Fielden, C.R. Brooks, M.D. Brotherton, J.P. Strizak, L.K. Mansur, J.R. DiStefano, Jr., and K. Farrell: Proc. Symp. on Modeling the Performance of Engineering Structural Materials, TMS/ASM Fall Meeting, Indianapolis, IN, Nov. 4-8, 2001, D.R. Lesuer and T.S. Srivatsan, eds., TMS, Warrendale, PA, 2001, pp. 161-74.
14. A. Plumtree and S. Schafer: ASTM STP 942, ASTM, West Conshohocken, PA, 1988, pp. 2249-56.
15. X. Kong, K. Saanouni, and C. Bathias: J. Eng. Mater. Technol., 1991, vol. 113 (2), pp. 210-14.
16. T. Wu, J. Ni, and C. Bathias: in Automation in Fatigue and Fracture: Testing and Analysis, ASTM STP 1231, C. Amzallag, ed., ASTM, West Conshohocken, PA, 1994,pp. 598-607.
17. C. Bathias, A.K. El, and T.Y. Wu: Eng. Fract. Mech., 1997, vol. 56 (2), pp. 255-64.
18. Y.D. Wang, H. Tian, A.D. Stoica, X.-L. Wang, P.K. Liaw, and J.W. Richardson: Nature Mater., 2003, vol. 2, pp. 101-06.
19. S.A. Padula II, A. Shyam, R.O. Ritchie, and W.W. Milligan: Int. J. Fatigue, 1999, vol. 21, pp. 725-31.
20. B.S. Hockenhull and H.A. Monks: J. Met. Sci., 1971, vol. 5, pp. 125-29.
21. W.P. Mason and W.A. Wood: J. Appl. Phys., 1968, vol. 39 (12), pp. 5581-84.
22. W.A. Wood and W.P. Mason: J. Appl. Phys., 1969, vol. 40 (11), pp. 4514-16.
23. W.A. Wood and D.E. MacDonald: Proc. 1st Int. Symp. on High Power Ultrasonics, IPC Science and Technology Ltd., London, 1972, pp. 50-53.
24. D.E. MacDonald: Eng. Fract. Mech., 1976, vol. 8 (1), pp. 17-29.
25. P. Bajons, K. Kromp, W. Kromp, H, Langer, B. Weiss, and R. Stickler: Int. Ultrasonics Conf. Proc., IPC Science and Technology Ltd., 1975, pp. 95-99.
26. E. Blank and N.S. Stoloff: Acta Metall., 1987, vol. 35 (9), pp. 2255-64.
27. L.E. Willertz: Int. Met. Rev., 1980, vol. 25 (2), pp. 65-78.
28. V. Ocelik, P. Palcek, P. Diko, J. Miskuf, and P. Duhaj: Key Eng. Mater., 1990, vols. 40-41, pp. 369-74.
29. V.F. Belostotskiy: Phys. Met. Metallogr., 1990, vol. 69 (1), pp. 171-78.
30. R.J. Morrissey, D.L. McDowell, and T. Nicholas: Int. J. Fatigue, 1999, vol. 21 (7), pp. 679-85.
31. M. Papakyriacou, H. Mayer, C. Pypen, H. Jr. Plenk, and T.S. Stanzl: Mater. Sci. Eng. A, 2001, vol. 308 (1-2), pp. 143-52.
32. R. Mohan, R. Morrissey, W.J. Porter, and T. Nicholas: Proc. 1998 ASME/ JSME Joint Pressure Vessels and Piping Conf., San Diego, CA, 1998, ASME, New York, NY, pp. 257-65.
33. R.O. Ritchie: Proc. 1996 ASME Int. Mechanical Engineering Congr. Exp., Atlanta, GA, 1996, ASME, New York, NY, 1996, pp. 321-33.
34. S.E. Stanzl, E.K. Tschegg, and H. Mayer: Int. J. Fatigue, 1986, vol. 8 (4), pp. 195-200.
35. J.-Y. Guinemer and A. Plumtree: ASTM, West Conshohocken, PA, 1982, pp. 452-65.
36. T. Yokobori and K. Sato: Eng. Fract. Mech., 1976, vol. 8, pp. 81-88.
37. B. Mukherjee and D.J. Burns: Exper. Mech., 1971, vol. 11, pp. 433-39.
38. K. Sadananda and P. Shahinian: Metall. Trans. A, 1980, vol. 11A, pp. 267-76.
39. R.G. Forman and V. Shivakumar: Fract. Mech., 17, ASTM STP 905, ASTM, West Conshohocken, PA, 1986, 59-74.
40. R.W. Swindeman: ORNL/NPR-92/24, June 1993.
41. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 1991, vol. 03.01, pp. E466-91.
42. Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 1991, vol. 03.01, pp. E739-91.
43. W.C. Connors: Mater. Characterization, 1994, vol. 33, pp. 245-53.
44. P.J.E. Forsyth and D.A. Ryder: Acta Metall., 1961, vol. 63 (377), pp. 117-24.
45. J.J. Au and J.S. Ke: ASTM STP 733, ASTM, West Conshohocken, PA, 1980, p. 202.
46. A. Madeyski and L. Albertin: in ASTM STP 645, B.M. Strauss and W.H. Cullen, Jr., eds., ASTM, West Conshohocken, PA, 1978, pp. 73-83.
47. P.K. Liaw, H. Wang, L. Jiang, B. Yang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Scripta Mater., 2000, vol. 42, pp. 389-95.
48. H. Wang, L. Jiang, P.K. Liaw, and D.L. Klarstrom: Metall. Mater. Trans. A, 2001, vol. 31A, pp. 1307-10.
49. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2279-96.
50. B. Yang, P.K. Liaw, H. Wang, L. Liang, J.Y. Huang, R.C. Kuo, and J.G. Huang: Mater. Sci. Eng., 2001, vol. 314 (1-2), pp. 131-39.
51. H. Wang, L. Jiang, Y.H. He, L.J. Chen, P.K. Liaw, R.R. Seeley, and D.L. Klarstrom: Metall. Mater. Trans. A, 2002, vol. 33 (4), pp. 1287-92.
52. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Trans. Nonferrous Met. Soc. China, 2002, vol. 12 (4), pp. 734-47.
53. L.J. Chen, P.K. Liaw, H. Wang, Y.H. He, R.L. McDaniels, L. Jiang, B. Yang, and D.L. Klarstrom: Mech. Mater., 2004, vol. 36, pp. 85-98.
54. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, L. Chen, and D.L. Klarstrom: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 839-48.
55. L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom: Mech. Mater., 2004, vol. 36, pp. 73-84.
56. P.K. Liaw, B. Yang, H. Tian, L. Jiang, H. Wang, J.Y. Huang, R.C. Kuo, J.G. Huang, D. Fielden, J.P. Strizak, and L.K. Mansur: Fatigue Fract. Mech., 33rd Vol., ASTM STP 1417, W.G. Reuter and R.S. Piascik, eds., ASTM International, West Conshohocken, PA, 2002, pp. 524-56.
57. B. Yang, P.K. Liaw, G. Wang, W.H. Peter, R.A. Buchanan, Y. Yokoyama, J.Y. Huang, R.C. Kuo, J.G. Huang, D.E. Fielden, and D.L. Klarstrom: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 15-23.
58. B. Yang: J. Mater. Eng. Performance, 2003, vol. 12 (3), pp. 345-53.
59. H. Tian, P.K. Liaw, J.P. Strizak, and L.K. Mansur: J. Nucl. Mater., 2003, vol. 318, pp. 157-66.
60. G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, M. Freels, Y. Yokoyama, M.L. Benson, B.A. Green, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2004, vol. 12 (10-11), pp. 1219-27.
61. B. Yang, P.K. Liaw, G. Wang, M. Morrison, C.T. Liu, R.A. Buchanan, and Y. Yokoyama: Intermetallics, 2004, vol. 12 (10-11), pp. 1265-74.
62. G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2004, vol. 12 (7-9), pp. 885-92.
63. B. Yang, M.L. Morrison, P.K. Liaw, R.A. Buchanan, G.Y. Wang, C.T. Liu, and M. Denda: Appl. Phys. Lett., 2005, vol. 86 (14).
64. B. Yang, P.K. Liaw, J.Y. Huang, R.C. Kuo, J.G. Huang, and D.E. Fielden: J. Eng. Mater. Technol., 2005, vol. 127 (1), pp. 75-82.
65. B. Yang, P.K. Liaw, M. Morrison, C.T. Liu, R.A. Buchanan, J.Y. Huang, R.C. Kuo, J.G. Huang, and D.E. Fielden: Intermetallics, 2005, vol. 13 (3-4), pp. 419-28.
66. G.Y. Wang, P.K. Liaw, A. Peker, B. Yang, M.L. Benson, W. Yuan, W.H. Peter, L. Huang, A. Freels, R.A. Buchanan, C.T. Liu, and C.R. Brooks: Intermetallics, 2005, vol. 13 (3-4), pp. 429-35.
67. H. Tian, P.K. Liaw, D.E. Fielden, J.P. Strizak, and L.K. Mansur: Metall. Mater. Trans. A, 2004, vol. 35A (10), pp. 3334-39.
68. C.E. Price and R.G. Norman: Acta Metall., 1987, vol. 35 (7), pp. 1639-48.
69. J.P. Strizak, H. Tian, P.K. Liaw, and L.K. Mansur: J. Nucl. Mater., 2005, vol. 343, pp. 134-44.
70. B.J. Edwards, K. Feigl, M.L. Morrison, B. Yang, P.K. Liaw, and R.A. Buchanan: Scripta Mater., 2005, vol. 53 (7), pp. 881-85.